- Fixed Price
Year of Make: 1986
Year of Make: 1986
- four-sided planing machine WEINIG type UNIMAT 23 E | automatic tap and slot machine WEINIG type UNITEC 10 | fine planing machine WEINIG type UNIPLAN | automatic folding machine WEINIG type UNIVAR 10 | incl. Paternoster, mechanization and set Gold tool IV66SONDERPREIS valid until end of June 2017: 39.900,00 € | Machine complete and function-tested.
Window machines ftm FAZ 2800 hand machine Fluegelcenter ftm windowing machines FAZ 2800 in good condition, ready for use. Machine number 596 Year 1993 voltage 220/380 V Max. 7 bar Weight approx 420 kg changes used as a basis, subject to prior sale! Service / Parts by MATEC CH-4952 Eriswil / DE-79618 Rheinfelden MATEC system technik GmbH Maschinenbau Mühlematte 4 CH-4952 Eriswil / Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Germany | Gerolzhofen
Year of Make: 1978
incl. return device used manufactured Okoma type UF 2 S built in 1978 mach.-No.. 78113 number of spindles 3 piece cut saw 2.2 kW slot spindle: clamping height 230 mm single stroke for 2 tools slot table: Feed automatically - infinitely variable clamping cylinder pneumatic 2 piece splinter wood changer double length stop Festo LAS with transfer 1. profiling assembly. Motor 7.5 kW spindle diameter 40 mm clamping height 250 mm circle diameter max. 200 mm single stroke for 2 tools synchronized counter rotation switchable second profiling assembly: Engine 7.5 kW spindle diameter 40 mm clamping height 250 mm circle diameter max. 200 mm single stroke for 2 tools Glasleistenaustrennaggregat feed: Motor 0.75 kW Number of rolls 9 diameter 100 mm continuously adjustable thrust bearing for longitudinal profiling frame support workpiece transfer autom./manuell control electrically suction D 100-120 - 120-120 - 80 mm space ca. LxWxH mm 3000 x 2000 x 2000 weight ca. 2000 kg located in 97447 Gerolzhof
Info-mailer for "Window Manufacturing Machine"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Germany | Gerolzhofen
Year of Make: 1981
Belgium | Kortrijk
Year of Make: 1988
Window installation in angle formation with automatic return Min / max workpiece length: 280 mm / 2600 mm. Min / max workpiece width: 20 mm / 300 mm Min / max workpiece thickness: 20 mm / 100 mm feed motor of the pin carriage: 0.75 kW Feed speed: 3 to 20 m / min feed in Profilierteil: 0.75 kW Feed speed: 3 to 20 m / min. The number and diameter of the feed rollers rating: 14/145 mm. Hydraulic motor: 0,75 kW Auomatischer rewind feature -Ablängsäge: Motor 3 kW, 3000 rev / min shaft with 30 mm diameter saw blade with 400 mm diameter horizontal adjustment of the saw over 100 mm Revolver stops for the adjustment: 16 St -Zapfenwellen, 2 St: 4 automatic selectable positions The motor 11 kW, 3000 rev / min and wavelength diameter: 50 mm / 320 mm. Vertical adjustment of the waves: 255 mm. Maximum tool diameter. 350 mm. -Profilierteil With 4 shafts: 2 Profilierwellen, each with 3 aut selectable positions The motor with 7,5 kW, 6000 rev / min and wavelength diameter. 50 mm / 270 mm. Vertical adju
used manufactured Harbs type ZSM V4 motor 4/4/3 / 2.2 kW number of spindles 3 clamping height 140 mm diameter 40 mm cross-cutting saw table size 1000 x 300 mm stop ruler 1800 mm 1 x workpiece clamping manually suction D 120/160/100 mm space ca. lxwxh mm 2200 x 2100 x 1600 located in 97447 Gerolzhofen in current condition as seen
For milling, drilling, glue injection and dowel driving | Single machine for the longitudinal and transverse machining of profiled window and door elements, | Workpiece length: 200 - 3.500 mm, | Workpiece width: 30 - 200 mm, | Workpiece thickness: 30 - 100 mm, | LBH : 6,000 x 1,700 x 3,000 mm
used manufactured by Harbs type K2V Year 1971/72 mach.-No.. 61779 2 spindles with single stroke and feeder 5 rolls lifting height about 90 mm spindle diameter 2 x 40 mm mounting height mm 190 suction port mm 2 x 120 D. space ca. LxWxH mm 3000 x 1600 x 1700 Weight kg 2000 located in 97447 Gerolzhofen in the actual state , Without technical inspection. Without repair work.
used manufactured by Kölle type Z 40 mach.-No.. 2012/0 clamping height 190 mm diameter 40 mm cross-cut saw with revolver setting speeds 3000/4500 U / min. Table size 800 x 400 mm stop rotation stop ruler orginal Kölle 2400 mm with extension 1000 mm workpiece clamping manual 1 x Extraction 140/80 mm required space ca. lxwxh mm 2200 x 1400 x 1600 weight ca. 800 kg located in 97447 Gerolzhofen as-is
Machine equipment for double-sided, horizontal and vertical drilling in production lines of non-profiled workpieces, workpiece dimensions: | Workpiece length: 350 - 3.500 mm, | Workpiece width: 45 - 150 mm, | 50 m / min, power consumption: approx. 13 kW, suction air speed: approx. 30 m / sec, SPECIAL PRICE valid until end of June 2017: 10.000,00 € | Machine complete and function-tested.
Hardware recessing table RUCHSER
Germany | Tauberbischofsheim
used, top condition, hardly run cleaned, function checked, renewed test run maintenance unit and switch housing, pneumatic compl. sealed, manufactured by Hirsch type LQP 180, built in about 1992, to cross-processing mini tines and counter profiles. Conversion to + 70 / -70 degree slope of length on the stop, wood voltage with bridge 8 bar manual feed of the saw and Fräswagens, safety circuit electrical brake system Thickness max. 80 mm thickness wood min. 10 mm tread depth max. 50 mm saw unit: AC motor 2,2 kW spindle speed 2800 r / min. horizontal adjustment 50 mm milling unit: AC motor 4 kW Spindle speed 6000 rev / min. Spindle length 100 mm available spindle diameter 40 mm tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm optional: digital angle display, complete. renewed, org. . Elgo division of the angle indicator 10.1 degrees incl finger joint cutter original price about EUR 20.000, - LVP: 6,850.00 located in 97447 Gerolzhofen as-is
Find large number of used window manufacturing machines for sale on TradeMachines.com. Bid now on window manufacturing machines auctions to win the low cost and quality used vPVC Window Machinery from Europe, UK and USA.
Window Machinery Enables Simple, Effective, And Customised Window Fabrication.
Whether you are an experienced window fabricator, or you have had enough of being asked for windows and doors that you can’t deliver because of a lack of supply, buying the right window machinery is an important step. As well as a choice of individual elements, such as those that are used to saw the aluminium or rout the PVC frame, you can also buy full aluminium window machinery and full uPVC window machinery that performs all of the vital steps.
Typically speaking, the larger super machines are used to create large batches, or ongoing runs of windows and doors, but this doesn’t necessarily mean that you should choose the largest window manufacturing machinery available. Smaller machines can be easier to manage, will not cost you extra money in unneeded running costs, and by buying at a window machinery auction, or buying used window machinery, it is possible to save on the initial purchase cost as well. Window manufacturing equipment does vary, and one of the primary differences in most model lines is whether they are designed for aluminium or PVC window fabrication.
Some elements of the fabrication process can be performed on-site, including any last minute alterations that might be required to ensure a perfect fit for your windows. A uPVC portable window manufacturing machine can be moved from one fabrication unit to another, and with some of the most portable pieces of machinery available, you could also transport the machine to the site in order to make adjustments on the fly.
Emmegi, MEP, Kombimatec, Urban, Infismac, Tangram Technology, Promac, Delta, Prosaw and Glasino are some of the best known manufacturers of aluminium and PVC window machinery, and provide a good place to start any search.