Please rotate your device! (and enjoy the best presentation of our products)

All categories

Welding Device

— 11
Sort by:
  • 773 € $ 824 £ 672

    From industrial recycling (resolution of a construction company), we have here, inter alia device: Kemppi Tylarc 303 electrode welder / construction site welding machine. The machine is in good condition, function test was performed successfully. Optical condition see the pictures - clean / ready for plug (32A power current) device. Super suitable for the site, also using a crane and hangers be conveyed. Plus and minus cable set with respective ends are and an extension cable for positive lead (see Fotots). The weld lines have usual patched with electrical tape, but not excessively many. When buying, we still give some welding electrodes so. Information: duty machining: 380-400 Volt Ready to plug (32A power current) Dimensions: 93 x 70 x 63cm (LengthxWidthxHeight) Weight: 180 kilograms (More details for welding see nameplate last photo) delivery: Kemppi Tylarc 303 welder positive lead with electrode handle negative lead with metal tongs Extension cable Plus for some electrodes professi

  • Projetion Welding MachinePECO PP1000
    • Fixed Price

    PECO PP1000 | 1980

    Germany | Leipzig


    Spot Welding Machine capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: control over plant type E 0423.2 -eltros II from LEW Henningsdorf foot control i.D.

  • Info-mailer for "Welding Device"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • Welding Machine - Circular SeamSOUDRONIC RH 100 SPEZ
    • Fixed Price

    SOUDRONIC RH 100 SPEZ | 1986

    Germany | Leipzig


    Working area/application: Seal-welding of bottom and jackets from vessels, which are tacked before from ferretic chrom steel. This machine is custom-product for BOSCH. the control was produced by BOSCH. Connecting: Welding-capacity: 1 x 380 V / 50 Hz / 200 A Motor-capacity: 2 x 3 x 380 V / 50 Hz / 1,6/2,3 A Width feed line: 2 x 95 mm², 1 x 50 mm², 6 x 1,5 mm² Welding-power on rolls: adjustable until 1060 daN Tangential deviation of fix welding-roll: 8 ° Material: X8 CR Nb N 1.4511 Price for one unit

    • Fixed Price

    Welder "Lorch" E9530 B - good condition

    Germany | Heideblick

    1,547 € $ 1,649 £ 1,344

    Welder "Lorch" E9530B - good condition Year: not read Serial no .: 464-0406-001 15-29V / 25-300A all other data - see rating plate (Figure 6) Transport can be queried Please see my other auctions my shop! Viewing is welcome! No renegotiations! The article can on weekdays from 07.00 - 16.00 in include Zaackoer Weg 38, 15926 Luckau, be sampled and collected! Tel: 03544557567 Mobile Phone: 0174/3470870 Fax: 03544557568 Email: to-jung-gmbh@gmx.de Warning Special Agreement: merchant business. Tender may only companies i.S.d.§14BGB. A sale to consumers does not take place. The sale takes place without any warranty. Shall remain unaffected by the cases where an exclusion of warranty by law can not be done, for example, gross negligence, intent or personal injury.

  • Welding UnitKEMPPI RA 450 W
    • Fixed Price

    KEMPPI RA 450 W | 2000

    Germany | Leipzig


    welding device with feed FU 30 - control via switch 2/4 beat 64 welding steps - water and air cooled (switchable) without hose package - with intermediate hose package 13,5m without burner head welding device is functional.

  • Spot Welding MachineDALEX 3346-2
    • Fixed Price

    Dalex 3346-2 | 1991

    Germany | Leipzig


    spot welding tong capacity: at 50% ED:22kVA max. capacity: 59 kVA max. short-circuit-current/sec.: 17kVA pressure capacity electrodes: 360 daN compressed air requirement: 6-10 bar at 1000 stokes = 0,5m³ welding result: 3+3 and max: 4+4 steel sheet electics: 380V 32A-net fuse control: 5-tenses-synchronic-welding control MPS 15033 stroke sycle of the single stroke cylinder at 10mm stroke =200pro/min additional equipment: spring type D5/45 spot welding gun has a water cooling space requirement with control unit: B:1100mmxT:800mmxH1550mm machine functional! i.D.

  • Welding UnitDALEX CGL 252
    • Fixed Price

    Dalex CGL 252 | 1995

    Germany | Leipzig


    Welding Rectifier MIG MAG ait cooled - burner -hose package -pressure reducer - earth cable and pliers This welding unit will be offered as is with a defect wire feed! i.D.

Info-mailer for "Welding Device"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.