Pressure: 180 Tonnеn table: 1500x900mm Stoessel: 1340x720mm Mounting height: 450 / 600mm stroke adjustment: 10-150mm strokes / minute: 30-150 ram adjustment: 150mm power consumption: 40KW Weight: 28 tons Height: 3800mm press was mechanically overhauled in 2002, with a new Siemens S7 controller, servo motor (Baumueller) and a frequency converter equipped. Roll feed grid, built in 2002, material 300x4mm
Used Sheet Metal Equipment— 22
Pressure: 315 Tonnеn Table surface: 2220x1225mm Stoesselflaeche: 2220x1225mm installation height: 580mm ram adjustment: 130mm stroke adjustment: 40-210mm strokes / minute: 20-75 Power demand 50 KW Weight: 45 tons Height: 4.870mm Feed: PME servo 600, Material 600x5mm, Year: 2006 Automatic stroke adjustment hydraulic overload fuse Kugelrollfuehrungen
Pressure: 320 Tonnеn Table surface: 1.550x1.300mm Stoesselflaeche: 1.570x1.240mm ram adjustment: 150mm Installation height: 540mm Side Durchgaenge: 800mm stroke adjustment: 20-200mm strokes per minute: 20-60 Power demand: 60KW Weight: 45 tons Height: 4.450mm width: 3.800mm depth: 2,800 mm belt system Schleicher: roll feeder, straightener, reel Coil weight 5 tons, range: 650mm, strip thickness: 2.5 mm
Pressure: 320 Tonnеn Type: SAR 320 table: 1950x1100mm Stoessel: 1650x1100mm Side Staenderdurchgang: 800mm stroke adjustable: 20-1102mm strokes / minute: 20-120 Power requirement: 90 kW Weight: 62 tons height 4800mm The press is completely overhauled with new press control
Info-mailer for "Sheet Metal Working"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
- Fixed Price
Punching machine OMEC SD 250 / 200.2.1
Year of Make: 1991
- Fixed Price
Punching machine Kaiser V40 / 420
Year of Make: 1988
Pressure: 40 Tonnеn table: 420x500mm Stoessel: 420x400mm stroke: 08-50mm strokes / minute: 100-500 Installation height: 270mm Power demand: 5.5 kW Weight: 3.8 tons Height: 2.700mm Ortlinghaus clutch control part renovated gripper feed reel straighteners combination Kohler , Baujaht 1988
Bеstehend from a roll feed / leveler ALBA and a FECKER reel with pressure roller. Feed / stroke: 0,1-6500mm Material Width: 400mm Thickness: 6mm Material section: 1200qmm 2 transport rollers, 8 straightening rollers Motor power: 4 KW, control Siemens S5 FECKER reel: Coil weight 2.5 tons, Innenspreizbereich: 560-530mm Material: 400x6mm
Pressure: 400 Tonnеn Year: 1988 Table: 1.750x1.400 Stoessel: 1.500x1.000 stroke: 250mm strokes / minute: 15-60 ram adjustment: 150mm Installation height: 550mm Side Staenderdurchgaenge: 500mm Weight: 48 tons Height: 4.200mm Control: Siemens S5 overload fuse: Hydraulic clutch: Hydraulic roller feed: Arku servo master 500, built in 1987, material width: 500mm with a new servo motor and frequency converter
Gеneralueberholt 2011 Printing: 500 tons Table surface: 2000x1300mm Stoesselflaeche: 2000x1300mm Stoesselverstellbarkeit: 150mm Lateral passage: 1000mm Installation height: 650mm stroke adjustment: 20-200mm strokes per minute: 20-50 Power demand: 30 kW weight 55 tons Height: 4500mm Width: 3400mm Depth: 2200mm with SERVO MOTOR AND FREQUENCY
Pressure: 500 Tonnеn Side Durchgaenge: 1100mm Installation height belongings down, adjustment up: 650mm Biggest distance between the uprights: 2500mm table: 2200x1300mm Stoessel: 2200x1200mm ram adjustment: 140mm stroke adjustment: 40-300mm strokes per minute: 20-60 Power demand: 85kW Weight: 75,000 kg height: Ca. 7.000mm 2-connecting rod hydraulic overload fuse Siemens S5 control system Schleicher band, built in 1985 consisting of roll feed, straightening machine, reel for Material: 650x3mm
Pressure: 160 Tonnеn Side Staenderdurchgang 600 mm installation height: 420mm stroke up, adjustment downward ram adjustment 80 mm table surface 1100x1100mm Stoesselflaeche: 1030x800mm Durchfalloch in table 680x250mm stroke adjustment: 30-100mm strokes per minute 40-180 Power requirement 18.5 kW, weight 20 tons, height : 3950mm Siemens press control and ALBA roller feed 1989 400x3mm
Pressure: 80 Tonnеn Lateral passage: 300mm Installation height: 280 / 440mm Table: 730x750mm Stoesselvertsellung: 80mm Stoessel: 630x730mm diarrheal hole in the table: 550x220mm stroke: 80mm strokes per minute: -50 - 250 Power demand: 30,5KW Weight: 14.000kg height: 3,800 mm width: 3.490mm depth: 1.400mm 2 conrods grid gripper feed leveler double Wend reel material 300x3mm
Bandanlagе consist of: coiler AH8000, bandwidth 750mm, spread range: 470-530mm, collar outer diameter: 1500mm, load capacity: 8000kg, hydraulic spread, pressure roller, loading steel Haspelverfahrweg, insertion leveler: RM 5075.4 / 21, material thickness: 0,45-6mm, P roll feed: Powermaster 800, material 800x6mm
Pressure: 50 Tonnеn Side Durchgaenge: 300mm Installation height: 350mm table: 810x550mm Stoessel: 700x420 ram adjustment: 80mm stroke: 08 - 60mm strokes / minute: 85-500 Power demand: 7.5 kW Weight: 7500 kg Height: 2.900mm Width: 2.440mm depth: 1300mm press control: Siemens S5 2 conrods Kaiser Zangenvorschu: 180mm bandwidth
Pressure: 315 Tonnеn Side Durchgaenge: 600mm Installation height: 478mm Table surface: 1500x1020mm Stoesselflaeche: 1350x780mm ram adjustment: 130mm diarrheal hole: 850x300mm stroke adjustment: 20-220mm strokes per minute: 20-45 Power demand: 22 kW Weight: Approx 25 tonnes Total height: 4200mm overhaul with new 2005 controller roll feed: PME Servo600, material 600x5mm, cross section 2200mm Hydraulic overload safety Semiautomatic stroke Pneumatic clutch-brake combination Stoesselfuehrung: 4 times
Pressure: 75 Tonnеn table: 630x620mm Stoessel: 500x450mm mounting height: 370mm ram adjustment: 80mm Side Staenderdurchgaenge: 300mm stroke adjustment: 08-100mm strokes / min .: 07-160 Power demand: 11KW Weight: 7 tons Height: 3050mm SIRI roll feed material 300x3mm Hydraulic overload fuse Hydraulic Ortlinghaus clutch with additional brake
Pressure: 250 Tonnеn Side Durchgaenge: yes Fitted Height: 560mm Biggest distance between the uprights: 2050mm table: 2000x1000mm Stoessel: 2000x1000mm ram adjustment: 140mm Stroke: 20-200mm strokes / minute: 20-75 power requirement: 40 kW Weight: 30 tons Height: 4700mm Ground-level installation
Sheet Metal Working (22)
- Press Brake (0)
- Belt Systems (5)
- Vessel Turning Units (0)
- Gas Cutting Machine (0)
- Coiler / Decoiler (0)
- Sheet Metal Processing Centers (0)
- Sheet Steel Cutting Machines (0)
- Sheet Metal Working Machine Accessories (0)
- Plasma Cutters (0)
- Bending Centers (0)
- Profile Rollers (0)
- Deep-Beading Machines (0)
- Loading Magazines (0)
- Notching Machines (0)
- Swing Beam Shears (0)
- Slitting Machines (0)
- Beading Machines (0)
- Wide Strip Mills (0)
- Slitting / Cut-to-length Line (0)
- Laser Cutting Machine (0)
- Profile Bending Machine (0)
- Roll Forming Line (0)
- Section Shear (0)
- Straightener (0)
- Plate Bending Machine (0)
- Folding Machine (0)
- Automatic Punching Machine (17)
- Punching Machine (0)
- Plate Shear (0)
- Further Sheet Metal Working Machines (0)
- Water Jet Cutting Machines (0)
- Machining Centers (0)
- Drilling Machines (0)
- Boring Mills (0)
- Lathes (0)
- Erosion Machines (0)
- Milling Machines (0)
- Die Casting Machines (0)
- Surface Treatment (0)
- Presses (22)
- Production Lines (0)
- Saws (0)
- Grinding Machines (0)
- Forging Machines (1)
- Welding Machines (0)
- Gear Cutting Machines (0)
- Heat Treatment (0)
- Further Machine Tools (0)
- Wire Processing (0)
- Other Metal Equipment (0)
- Metal Materials (0)
The most important tools for sheet metal work are sheet metal brake and press brakes, shears, cutters and other machine tools that work in a similar way. Find the latest listings of sheet metal machines in metal working machinery auctions and the second-hand market right here! The most common forming processes for sheet metal work are cold forming processes and non-cutting separation processes. Forming sheet metal differs from massive forming processes because the thickness of the workpiece remains the same. One if the most important tools for sheet metal work plant are presses and other machine tools that work in a similar way. The pressure required for processing can either be created mechanically or hydraulically (like an eccentric press). Welding can also be done by special machinery. So for the vast overview of the second-hand market and auctions of metal sheet equipment please take a look!
Sheet Metal Machine Tools Used for Processing Sheets
Sheet metal working was already done in earlier times when the task of processing metal began. Evidence of this arose from tools that were found. The characteristic example is the anvil with a horn, which was used to process sheet metal and wires. Hammers are typically used to manually process sheet metal works. The transition to using sheet metal machines came about with the development of rolling mills in the 17th century, which were used for sheet metal equipment manufacturing. Presses are the key component of sheet metal machines. The newest developments of the 20th century are thermal and laser cutting machines, which are used to separate sheet metal.
TRUMPF TruBend Series 3000 Press Brake Specs
|TruBend 3100||TruBend 3066|
|Press force||1000 kN||660 kN|
|Bending length||3060 mm||2040 mm|
|Width between columns||3384 mm||2364 mm|
|Usable installation height||430* mm||430* mm|
|Rapid speed||200 mm/s||200 mm/s|
|Max. working speed||15 mm/s||15 mm/s|
|Control||T3500T Multi-Touch||T3500T Multi-Touch|
Applications Areas used in Metal Sheet Working Machinery
In addition to the single purpose sheet metal equipment like a guillotine (plate) shears, used to cut sheet metal, there are also universally applicable machine tools like presses. If equipped with the right punches, a press can undertake both forming and separating processes. The press brake is used to form sheet metal into equally long components. Round bending machines are used to produce pipes out of sheet metal. Similar tasks include profile bending machines for metal bands and profiles. The profile metal shear is used to separate these profiles and bands. Straightening machines prevent deformations in the sheet metal by using a targeted plastic mould. One of the most important processes for separating sheet metal is to use shears. Using this process does not result in cutting off formless pieces, which is what happens when using saws. Thermal cutting machines are used for particularly thick sheet metal or when the cut does not need to be of high quality (e.g. when cutting waste metal). Modern sheet metal processing centres are suitable for both sharing and laser cutting. To treat the surfaces of sheet metal, grinding machines and coating machines are used. Welding machines are used to merge metal sheets together using different types of process. A Metal cutter equipment could be used to cut smaller sheets of metal.
Types of Metal Machines for Sheets
Sheet metal machinery is a category that covers a number of items of industrial equipment used in sheet metal forming. Processes used in sheet metal forming include bending, curling, punching, decambering, perforating, deep drawing, expanding, gas cutting, laser cutting, water jet cutting, welding, rollers, press brake forming, punching, roll forming, rolling, stamping, straightening and and other metal machines oprations. Naturally, there is a large amount and variety of equipment to be aware of when buying used sheet metal working machinery. The following covers the more common used sheetmetal equipment in the industry.
- Press brakes are used to produce lengthy, thin sheet metal parts by bending them by means of a die and a punch. Sheet metal can be cut in a number of ways, such as by water jets using a mixture of water and an abrasive substance. Another method is by using gas cutting machines. These use fuel gases and oxygen to cause localised melting of the sheet metal.
- Laser cutting machines work by playing a beam of laser light created in a lens assembly over the metal, resulting in a highly precise and smoothly cut edge.
- Profile bending machines are used to create a curvature in the sheet metal, generally by means of a die block.
- Punching machines operate by catching the sheet metal between a hardened steel punch and a die mounted in a press. The press pushes the punch into the die with sufficient force to create a hole in the sheet metal.
- Straighteners are machines often used in rolling mills to level the sheet metal's surface. These are divided into roll-type and stretching type machines.
Used Sheet Metal Brake Machinery for sale
Sheet metal working involves a large number of industrial processes dealing with the various metals such as steel, tin, copper, aluminium, brass, titanium, nickel, gold, silver and platinum. Sheet metal equipment includes such machinery as sheet metal press brakes, straighteners and machines for cutting, profile bending and punching. One of the fundamental forms utilised in metalworking processes, sheetmetal is used in roofing, car bodies, transformers and numerous other applications. Due to this versatility, a widespread demand for used metalworking machinery that manufactured using sheet metal due to the high cost of new machinery, there is a steady demand for used sheetmetal equipment for sale. Such used metalworking equipment is generally built to last and be durable and reliable in very demanding industrial environments, so if you're looking for used sheet metal machinery you know you have an excellent chance of finding something that will give you many years of service. To get a comprehensive overview of the extremely wide range of sheet metal tools and equipment available in this field and to increase your chances of finding a real bargain it's a good idea to see what is available at sheet metal machinery auctions. Another popular and growing source of used machinery is the second-hand market. And with the use of the internet, this is a quick, easy and convenient way of finding and purchasing the used sheet metal equipment you need for your bushiness.
Manufacturers of Machines for Forming Sheet Metal
Important brands within the field of sheet metal equipment used for processing of sheet metal include ARBOGA, BOMBLED, EDEL, GASPARINI, HAEUSLER, HÄMMERLE, MESSER, PROMECAM, PULLMAX, SAFAN, SCHAEFER, TRUMPF and WMW.