Please rotate your device! (and enjoy the best presentation of our products)

All categories

Vebim N.V.

— 431
Sort by:
  • OMPEC veneer pack guillotine
    • Fixed Price

    OMPEC TRO/2L/3200

    Belgium | Kortrijk


    Double knife veneer pack shears for perfect parallel cutting cutting length. 3200 mm Max package thickness 80 mm Min / max section Width 15/480 mm Total power: 7 kW

  • WADKIN-Moulder
    • Fixed Price

    Wadkin GA | 1990

    Belgium | Kortrijk


    Power: 180 x 130 mm. gross, 170 x 120 mm net feed: 6 to 28 m / min, 2.2 kW motor feed rollers with shaft drive Pneumatic pressures waves: 8 below 5.5 kW, 5.5 kW right, left 5.5 kW, 5.5 right kW, above 11 kW, top 7,5 kW, bottom 5.5 kW, 5.5 kW universal shaft diameter: 40 mm Mechanical digital readout preliminary straightening table 2 m.

  • HOLZ-HER Edgebander sided
    • Fixed Price

    HOLZ-HER 1466 | 2001

    Belgium | Kortrijk


    Automated edge bander workpiece thickness: 6 - 60 mm (unit dependent) Werckstückbreite min 60 mm Werckstücklänge min 140 mm edge thickness max 30 mm (unit dependent) feed: 8 - 20 m / min Equipment: infeed fence programmatically spray 1856 Joint trimming unit, 2 x 3kW, max workpiece thickness: 48 mm 1960 magazine for rolls and strips 1901 glue station granular + cartridge 1905 print zone, pneum. Operated rollers, 1 driven, 6 non-driven rollers 1917 caps, 0 ° - 15 °, 2 x 0,45kW, max edge dimension in 60mm thickness of the workpiece: 15 x 65 mm, 1819 pre-milling, 2 x 1,86kW 1962 Form milling below , 2 x 0,44kW, 1934 form milling above, 2 x 0,44kW, 1933 Profile scraping, 1927 flat scraper, 1964 Nutenfräse, 3,8kw, 1932 buffing, 1851

  • Info-mailer for "Vebim N.V."

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • BIESSE-dowelling machine (Gluing, recover)
    • Fixed Price

    Biesse SVBL/J | 1989

    Belgium | Kortrijk


    Double-sided Dübellochbeleim- and dowel inserting machine in continuous working width: up to 3.25 m. Dowel: 8 mm Equipment: 1 + 1 dowel magazine with 6 outputs 1 + 1 hopper with 6 Pos 5 + 5 anchor tools with glue gun 1 + 1 Werkstückriementransportl.

  • BIESSE dowel-throughfeed drilling machine
    • Fixed Price

    Biesse R 6 | 1986

    Belgium | Kortrijk


    . Dowel hole drilling machines in continuous operation Max working width: 3.2m. Equipment: 2 x Horizontal, left / right, each with drilling with 20 spindles, centers 32 mm. 4 x vertical, below, each with 2 drilling heads with 10 spindles, centers 32 mm. Drilling heads can be rotated 90 ° and adjustable in depth All adjustments with Siko counters feed the drilling units pneumatically

  • N / A Brush cleaning machine
    • Fixed Price

    N / A Brush cleaning machine

    Belgium | Kortrijk


    Double-sided brush and cleaning machine for plates. Working width: 1.80 m. Workpiece transport means rollers. 4 brushes (2 x top and bottom) connection to suction up and down, diameter: 2 x 150mm top, 2 x 100mm Bottom Variable feed speed. Height adjustment via a central spindle. Without electrical cabinet.

  • PANHANS-planing knife setting device with magnet
    • Fixed Price

    Panhans 1533

    Belgium | Kortrijk


    With strong magnetic adhesion planer blades supernatant to 1/10 mm accuracy to scale adjustable Suitable for knife shaft diameter of 80 up to 145 mm.

  • WADKIN-tongue and groove milling machine
    • Fixed Price

    Wadkin SUPER XJS 220 | 1994

    Belgium | Kortrijk


    Hydraulic acceleration inlet so that the workpieces are longitudinally shock fed to edge longitudinal milling machine with 9 waves Wadkin 50 m / min feed speed Ceramic coated machine bed with Pressluftzuführ for better sliding cardan with hydraulic unit 30PS All PU-feed rollers, each with a pneumatic. Pressure cylinder Electronically-digital displays for the shaft setting specialty shoes towards the vertical shafts Complete Sound enclosure pneumatically pivoted up facilities: 2 m. Infeed table Bottom horizontal shaft for both sides scoring of the plates, 15 HP Right and left a pre-Profilierwelle, each 80 mm in diameter, 10 HP each right and left a Profilierwelle for the lower half of the section, 10 HP each right and left a Profilierwelle for the upper half, each 10 hP right and left a Fasefräswelle, 10 hP each 2 upper and lower driven brush for cleaning the plates 90 ° angular transfer to links with intermediate magazine in 2 levels for max. Workpiece dimensions 1220 x 215 mm (width A

  • MUTI-Swinging
    • Fixed Price

    MUTI OMB 1 | 1990

    Belgium | Kortrijk


    Power 2.2 kW Vertickalverstellung from Stemmaggregat: 80 mm Table travel in X: 400 mm Table travel in Y: 150 mm Maximum drilling depth: 130 mm Table dimensions: 1000 x 310 mm workpiece clamping by 2 horizontal and 2 vertical printer port for dust: 70 mm

  • HOMAG sizing and edge double-sided
    • Fixed Price

    Homag KF26/7/A3/25 | 1997

    Belgium | Kortrijk


    Double-sided machine for formatting the workpiece edge, Kantenanleimen- and postprocessing of different edge materials from the roll to 3 mm edge thickness machine suitable for longitudinal and transverse processing fixed stop side left Rolling block link chain Top pressure with driven wide belt width adjustment via linear guide feed speed 10 - 32 m / min workpiece overhang 30- 80 mm. Workpiece thickness 12 to 40 mm. Working height: 950 mm. Working width double-sided min. 240, max. 2500 mm. Edge material roll from 0.3 to 3 mm, roll diameter up to 900 mm.. Machine equipment left + right: 1 catchment device 3 rolls folded 1 + 1 chain track extension machine II + 1000 mm format part with compact Doppelzerspaner: 1 + 1 milling motor 4,5 kW, 100 Hz 2 + 2 motors 4,5 kW offset above each built on Frässtander 1+ 1 plate purification by gluing nozzles compact A3: 1 + 1 Werkstückkantenvorbeheizung 1 + 1 hot-melt adhesive unit Q34 1 + 1 magazine 6 rollers and roller separator to 3 mm. 1 + 1 print

  • BRANDT Edgebander with adherend
    • Fixed Price

    Brandt KD 79/2 CF | 2001

    Belgium | Kortrijk


    Single-sided edge with jointing trimming in Rechtsausfürhung edge thickness: 0.4 to 12 mm roll goods to 0.8 x 60 mm or 3 x 45 mm. Workpiece thickness: 8 to 55 mm, motorized height adjustment (Programmatically) Min workpiece width. 70 mm feed 14 m / min Panel feed by chain, Oberdruk with rolling noise Protective hood equipment: infeed fence adjustable trimming unit, 2.2 kW motors and coiled magazine Quickmelt gluing with roller pressure zone with 1 driven and 3 non-driven pressure rollers caps, pneumatic adjustment chamfer / straight, 2 x 0,35 kW motors milling unit, with sampling, tilting, 2 x 0,55 kW (bevel), pneumatically adjustable with 4-way turret milling unit , with sampling, tilting, 2 x 0,55 kW (radius), pneumatically adjustable with 4-way turret contour trimming, 2 x 0,35 kW scraper with quick buffing, 2 x 0,18 kW NC 16 control

  • OTT-sizing and edge side
    • Fixed Price

    Ott GmbH L-SHARK | 2006

    Belgium | Kortrijk


    Single-sided edge in right-hand version with joining part edge thickness: 0.4 to 3 mm workpiece thickness: max 50 mm workpiece length min 150 mm feed 22 m / min Panel feed by chain, top pressure with wheels Sound enclosure over the miter Spindles facilities: joining part with 2 Spindles, motors 1.5kW glue pot for EVA and PUR glue pressure zone with segmented push rail snipping unit K3, motors 0,2kW, 0 ° and 3 ° Shragstellbar flush trimming, motors 0,7kW radius trimming, tilting, automatically adjustable, motors 0.3kW form milling AKF, 2 axes control , motors 0,35kW scraper ZK flat scraper CC-F Buffing

  • BANES-glazing and control unit for window
    • Fixed Price

    RYKO VK 3532 | 2000

    Belgium | Kortrijk


    2 clamping bars completely (fixed 1x, 1x movable) under the table surface folded down outwardly roller conveyor for removing and outfeed, 200 mm wide clamping width 3400 mm Pneumatic height adjustment, 500 mm stroke

  • FLADDER grinding machines for wood finish and lacquer intermediate sanding
    • Fixed Price

    Fladder 300 AUT-1000 VAC | 2000

    Belgium | Kortrijk


    Workpiece width: 50-1000mm height max: 100 mm Pass speed: 2-12 m / min spindle speed RPM: 300-1250 Spindle length: 300 mm Number Fladder spindles: 6 Total number Fladder slices: 120 Main motor: 7,5 kW rotary motor: 0.37 kW feed motor: 0,75 kW Aussaugenstutzen diameter: 250 mm Aussaugenvolumen m³ / min: 2800 vacuum pump: 7.5 kW

  • LIGMATECH-workpiece repatriation for edge bander
    • Fixed Price

    Ligmatech ZHR 01/R/065 | 2006

    Belgium | Kortrijk


    Workpiece return for a one-sided edge banding machine format and in right-hand version with a length of approximately 6.5 m. Max. Panel dimensions: 2000 x 800 mm, min 300 x 150 mm... At the machine outlet an air cushion table with Set / lowering device is such that the plates are pushed onto the return belt length workpieces are rotated by means of a stop and recycled in the longitudinal direction

    PROFI TLF520 / 50/14 Automatic magazijn met lengte 53.5 en overspanningsbreedte 15 m. aflegplaatsen Aantal: 3 Aantal bruggen: 2 (Brug 1: stapelmagazijn, Brug 2: manloze cel) Brug 1: Werkstukafmetingen voor het inladen: lengte 2400-5500 mm, breedte 400-2350 mm, dikte 12-38 mm (max plaatgewicht 300 kg ) Werkstukafmetingen na het verwerken: lengte 2400 - 4300 mm, breedte 400 - 2350 mm, dikte 12-38 mm (max weight 250 kg) Werkstukoppervlak moet zijn vacuum aanzuigbaar Stapelplaatsen: bij invoer max. stapelhoogte van 1000 mm (max weight 6000 kg) Stapelplaatsen in het magazijn: max. stapelhoogte 2100 mm vanaf bodem (max weight 21000 kg / batch) Brug 2 voor de manloze cel met Zaagmachine HPP 380/31/31 Werkstukafmetingen: lengte 1800 - 3050mm, breedte 400 - 2070 mm stukken Verzaagde: lengte 263-2800 mm, 250 breedte -1200 mm Zaagbladoverstand: 95 mm Zaagwagensnelheid: Voorwaarts 5-130 m / min, back 130 m / min Pogrammeerbare aanslag: Voorwaarts 80 m / min, back 80 m / min software: Robotic HBV 3

  • SCM CNC router
    • Fixed Price

    SCM Group RECORD 130 | 2000

    Belgium | Kortrijk


    Matrix table edit box: 1200 x 3080 mm 250m³ Vacuum pump Becker milling motor 7,5 kW, ISO 30 tool holder, 900-18000 U / min, C-axis tool changer with 12 tool bursting with drill motor 1.5kW 5 Vertikalbohrspindel 4 Horizontalbohrspindel 3000 U / min Telemecanique Num 1040 Steurung.

  • BRANDT-format and edge bander side
    • Fixed Price

    Brandt KD 99 - F | 1996

    Belgium | Kortrijk


    Single-sided edge in right-hand version with joining part edge thickness: 0.4 to 20 mm roll goods to 0.8 x 60 mm, 3 x 45 mm workpiece thickness:.. 10 to 55 mm Min workpiece width: 65 mm Min workpiece length:. 160 mm feed 16 m / min Panel feed by chain, top pressure with wheels sound enclosure over the miter Spindles Freq.Umformer facilities: joining part with 2 Spindles, 2 x 2,2 kW Coil and strip magazine, enhanced Kappschere melt glue unit with glue roller system Quickmelt pressure zone with 1 driven and 4 non-driven pressure rollers pneum. actuated end trimming, chamfer and straight pneum. adjustable, 2 x 0,75 kW motors roughing, 2 x 1,5 kW fine trimming, tilting, 2 x 0,55 kW radius trimming, tilting, 2 x 0,55 kW Form milling 180 °, front and rear, 2 x 0.4 kW scraping unit Buffing

  • WADKIN Machining center CNC
    • Fixed Price

    Wadkin UX 2691 F.LC.C3 | 1990

    Belgium | Kortrijk


    3 axes controlled milling machine matrix table with dimensions: 2760 x 975 mm. In X, Y, Z: 2600/915/250 mm. Traversing in X and Y: 0 - 12 m / min traverse speed in Z: 0 - 6 m / min Distance tool holder to table surface, min 0 mm, max. 250 mm. Processing engines: 1 x LC milling motor, 3 / 4.5 / 6 and 9 kW (6000/9000/12000/18000 U / min) 1 x F milling motor, 2,2 / 3 kW (18000 and 24000 U / min) 2 x Pneumatic drilling CNC: Bosch CC 100 vacuum: 2 x 80 m3 / h

Info-mailer for "Vebim N.V."

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.