Please rotate your device! (and enjoy the best presentation of our products)

All categories

Suma GmbH

— 55
Sort by:
  • Machining Center - Horizontal BURKARDT + WEBER MC 120
    • Fixed Price

    BURKARDT + WEBER MC 120

    Year of Make: 1992


    Main spindle. Speed ​​range - main spindle 20 - 4.000min / -1 power capacity - spindle 37kW Max Torque 2.150Nm gear stages 4 spindle diameter in front. Bearing 130mm Tool holder A 50 pallet changer: of pallet 1,800 x 1,400mm B-axis 360 x 1! Max. Pallet load 6.000kg pallet change time 70sec switching time 6.5 - 16sec tool magazine: toolchanger 140pos. Max. Tool diameter 125mm max. Tool through. with free toolbox. 350mm max. Tool length 700mm max. Tool weight 40kg change time tool - Tool change time 9 sec tension - tension 15sec feed: Rapid (X / Y / Z) 15m / min feed rate max. 15,000mm / min Feed force 27 / 54kN tool magazine 140 pos.

  • Drilling and milling machine SORALUCE Soramill SP800
    • Fixed Price

    Soraluce Soramill SP800

    Year of Make: 1998


    Hours: 84,000 hours Table size: 8000mm Table Width: 1100mm Tool fixture: SK50 DIN 69872 Form A drive power: 22KW at 100% speed. 20-3000 continuously feed: 2-5000mm / min rapid traverse: 15000 Length / Width / Height: approx 10260x4455x3300 ride-Bedienerbuehne milling head with 2.5 ° pitch 50 tool stations Maximum tool weight: 20kg Max tool length: 350mm Maximum tool diameter: 115mm, with free Nebenplaetzen 200mm Coolantsystem: 25l / min, 12 bar, 2 pump tank capacity: 500 liters Scharnierbandspaenefoerderer in Bettlaenge, shedding height 1250mm center divider 2 working fields separately available

  • Info-mailer for "Suma GmbH"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • Bed Milling Machine - Vertical DEBER Dynamic 2
    • Fixed Price

    Deber Dynamic 2

    Year of Make: 1995


    automatic tool changer with 18 tool positions, spindle taper ISO 50, table size 2200 x 640 mm, chip conveyors, machine light, protective front doors, separate Kühlmittelbehältermit pump speed range 0 - 3000 revolutions / min, rapid traverse 2000 mm / min, including documentation.. Known deficiency, the tool changer must be checked.

  • Measuring system MARPOSS 6180830500
    • Fixed Price

    MARPOSS 6180830500


    MARPOSS battery cover - 6180830500 - Batteriefachdeckelset Alu E86 / E86N / E8, the item is new and unused but unpacked therefore it is sold as new.

  • Rotation, swivel, and tilt table SCHMITT 100 NH rotation u. Tilter
    • Fixed Price

    SCHMITT 100 NH Dreh u. Kippvorrichtung

    Year of Make: 2007


    Coming soon!

  • Machining Center - Horizontal DECKEL-MAHO DMC 80H linear
    • Fixed Price

    DECKEL - MAHO DMC 80H Linear

    Year of Make: 2006


    4-axis CNC machining center - tool changer: Manufacturer: Deckel Maho Year 2006 - Tool:.. HSK-A63, 6-fold pallet changer, 500 x 500 mm - Compact belt filter: made by HMF, type 36313, year 2006, - oil filter..: Fabr. DMG, type ARI OWT

  • Machining Center - Universal REIDEN BRF 1
    • Fixed Price

    Reiden BRF 1

    Year of Make: 1999


    - 3D probe Heidenhain TS630 / HSK63, - tool locations: -32Stk, HSK-63 with internal coolant supply, Form A, 15bar, with band filter - milling head. Automatically horizontally pivotable, manually swiveling to the side +/- 90 degrees every 2.5 degrees with Hirtverzahnung - clamping surface: 1500x630mm - Vacuum cleaners for shavings

  • Machining Center - Horizontal MAHO DMC 63H TOPPER
    • Fixed Price

    DECKEL - MAHO DMC

    Year of Make: 2003


    4-axis CNC machining center - tool changer: HSK-A63, 2-fold - pallet changer: 500 x 500mm - Chip conveyor: Manufacturer: Knoll.. Type 600 K-1, Ser-No. 211653, year 2003 -. Refrigerator, Fabr. .. Knoll, type AE1110, Bj 2003 Power 11.94 kW, - cooling unit, Fabr Hyfra, type VBK50, Year 2003..

  • Crane DEMAG Brueckenkran 32t
    • Fixed Price

    DEMAG Brueckenkran 32t

    Year of Make: 1978


    Coming soon!

  • CNC turning and milling center DOOSAN 2600 Y
    • Fixed Price

    Doosan 2600 Y

    Year of Make: 2012


    Machine absolutely Mint !!!!!! Turning diameter 255 mm turning length 760 mm control Fanuc 0i - TD Swing over bed 780 mm Swing over cross slide 630 mm max. Turning diameter 376 mm spindle turning speed range - spindle max. 4,000 min / -1 power capacity - spindle 22 / 18.5 kW Spindle nose ASA A2-8 spindle bearing diameter 140 mm spindle bore 86 mm Rod diameter 76 mm C-axis 0.001 ° chuck diameter 255 mm turret: toolchanger 12 pos. powered stations 12 pos. Speed ​​range - Driven. Tools max. 5.000 min -1 power capacity - Driven. Tools 5.5 kW shaft diameter 25 mm Drill bit diameter 50 mm change time 0.15 sec range: x-axis 260 (72 + 188) mm z-axis 830 mm y-axis 105 (+/- 52.5) ​​mm Tailstock: Quill diameter 100 mm quill stroke 100 mm tailstock seat MT 5 feed: Rapid x / Z: 30 / Y: 10 m / min total power requirement 41,98 kVA weight of the machine ca. 6,0 t dimensions of approximately 4.0 x 2.5 x 2.2 m documentation Chip conveyor Dreibackenfutter tool setting driven tools 2 + 2 tailstock C-axis

  • Vertical turret boring and Schleifma.-Single Column BUDERUS BV 1250 CNC 245
    • Fixed Price

    Buderus BV 1250 CNC 245

    Year of Make: 2008


    Tischhübe: - Z1 / Z2 axis 1000 mm - X1 / X2 axis 1300 mm Table speed infinitely adjustable: - Z Axis 0 - 30 m / min - X axis 0 - 50 m / min feed speed infinitely variable from 0.01 to 15 mm / min delivery hubanhänig 0.0005 to 0.1 mm workpiece spindle positioning the C axis

  • CNC Lathe MAGDEBURG M 160 S4
    • Fixed Price

    MAGDEBURG M 160 S4

    Year of Make: 2001


    Coming soon!

  • Vertical Turret Lathe - Single Column DOERRIES CONTUMAT VCE 2800/250 MC
    • Fixed Price

    Dörries Scharmann VCE 2800/250 MC

    Year of Make: 2008


    Main Spindle: speed range - spindle 3,000 min / -1 Number of speeds 2 power capacity - spindle 37 kW Max torque 1230 Nm Tool holder SK 50 clamping force max.. 25 kN Distance spindle / table max. 2.000 mm spindle diameter in front. Bearing 100 mm C-axis 0.001 ° C Speed: 0.002 to 2.5 rpm Work table: Table diameter 2500 mm max. Table load 25000 kg centering 250H7 mm Max. 224 rpm Number of speeds 2 Motor power -. Table 100 kW Max torque 44,900 Nm cutting force max. 50,000 N range: x-axis +/- 1.550 mm z-axis 1.500 mm tool shank system cross section 250 x 250 mm immersion diameter min. 340 mm Feeds: feed rate X / Z: 0-18000 mm / min Feed force X / Z: 35 kN Tool magazine: 1x toolchanger (x - x) pos.

  • CNC turning and milling center DOOSAN PUMA 280 M
    • Fixed Price

    Doosan PUMA

    Year of Make: 2012


    MACHINE ABSOLUTELY MINT !!!!!! Turning diameter 255 mm turning length 610 mm control Fanuc i-Series Swing over bed 630 mm Swing over cross slide 460 mm max. Turning diameter 410 mm spindle turning speed range - spindle max. 3,500 min / -1 power capacity -. Main spindle 22 / 18.5 kW Max torque 625 Nm Spindle nose ASA A2-8 spindle bearing diameter 140 mm spindle bore 86 mm Rod diameter 76 mm C-axis 0.001 ° chuck diameter max. 255 mm turret: toolchanger 12 pos. powered stations 12 pos. Speed ​​range - Driven. Tools max. 5.000 min -1 power capacity - Driven. Tools 5.5 kW shaft diameter 25 mm Drill bit diameter 40 mm change time 0.15 sec range: x-axis 242 mm z-axis 610 mm Tailstock: Quill diameter 100 mm quill stroke 100 mm Tailstock seat MT 5 feed: Rapid X: 24 / Z: 30 m / min total power requirement 38,4 kVA weight of the machine ca. 4,9 t dimensions of approximately 4.0 x 2.5 x 1.9 m chip conveyor documentation Dreibackenfutter tool setting driven tools 2 + 2 tailstock C-axis hydraulic un

  • Surface Grinding MÄGERLE F10RS5
    • Fixed Price

    MAGERLE F10RS5

    Year of Make: 1978


    MÄGERLE F10 R S5 / FV BJ 1978 - grinding length: 1000 mm - grinding width: 320 mm - Grinding wheel dimensions: width up to 160 mm - Grinding wheel Ø: 400 mm - Masch weight:. 3500 kg - Auspannflaeche 1050 x 240 mm - table longitudinal stroke 1130 mm table Cross travel 270 mm - 127 mm grinding wheel bore

  • Vertical Turret Lathe - Single Column FEICHTER FKD 18 CNC
    • Fixed Price

    FEICHTER FKD 18 CNC

    Year of Make: 2007


    Load max. 25,000 KG Hydraulic chuck factory price 180,000, - EURO

  • CNC Lathe - Inclined Bed Type HEYLIGENSTAEDT Heynumat 24
    • Fixed Price

    Heyligenstaedt Heynumat 24

    Year of Make: 2003


    currently under tension visible Control: Siemens Sinumerik 840D max. Diameter outside with upper turret 770 mm max. Diameter inside with upper turret 1080 mm max. Diameter outside with lower turret 330 mm max. Diameter inside with lower turret 620 mm travel Z-axis upper turret 940 mm travel: X-axis upper turret 500 mm travel Z-axis lower turret 940 mm travel: X axis lower turret 270 mm max. Swing over cross slide 550 mm max. Swing over bed 890 mm main drive power at 60% ED 60 KW speed range 5 - 1800 r / min transmission ratio 2 speed C-axis from 0.1 to 60 U / min rapid traverse X + Z 15 / min Tool System 0ben 12 times all driven taper VDI 60 quality 8.3 KW speed range 0-2000 U / min max. Resonant circuit 900 mm tool turret 10 times taper VDI 60 max. Resonant circuit below 550 mm Coolant capacity 450 L Kuehlmitteldruck 10 bar space requirements including chip conveyor 7 x 2.75 x 3 m weight of the machine 18 to EQUIPMENT and ACCESSORIES -. 6 jaw power chuck - various tools also driven.

  • Plandrehmaschine ZERBST 3000
    • Fixed Price

    ZERBST 3000


    - Rebuilt in 2007, including new gear excellent condition.

  • CNC turning and milling center INDEX G200 C
    • Fixed Price

    INDEX G200

    Year of Make: 1999


    , Main spindle and counter spindle, C axis. Interior spindle cooling. 2 turret with driven tools. Bar feeders (FMB turbo 10-65XT) and Knoll Hydrostatic. Operating Instructions, hydraulic / pneumatic circuit diagram available

  • Machining Center - Horizontal DECKEL-MAHO DMC 80H linear
    • Fixed Price

    DECKEL - MAHO DMC 80H Linear

    Year of Make: 2005


    4-axis CNC machining center - compact filter: Fabr.Interlit - type SPB4 / 900, filter area 1.200 mm3 - tool changer: fixture I-ISK-A63, 2-pallet changer, 500x 500 mm - Cooling device:. Fabr BMD, type ARlOWT, Ser.-Nr. 5000074 - Chip conveyor: Fabr.DMG, Bj. 2008

  • Travelling column milling machine MAUT E206
    • Fixed Price

    MAUT E206

    Year of Make: 2008


    A trajectory-axis: 270 ° (+ 45 ° / -225 °) B-axis movement range: 360 ° (+ 180 ° / 180 °) surface 14-200 mm x 1400 mm Number of grooves 8 T-slots width 22 H7 T slot spacing of 175 mm, the maximum permissible load of 100 000 N / m ² axes motion speeds X axis: Rapid 20,000 mm / min processing to 15 000 mm / min Y axis: Rapid 20,000 mm / min processing 15,000 mm / min Z axis: Rapid 20,000 mm / min processing to 15 000 mm / min A-axis: Rapid to 5000 ° / min B-axis: Rapid 5000 ° / min cutting head spindle taper BT50 tools: maximum diameter of 125 mm, the maximum Duration of 350 mm

  • Machining Center - Vertical HURCO VMX 50
    • Fixed Price

    Hurco VMX

    Year of Make: 2001

    20,000 € $ 21,318 £ 17,281

    Table size: 1500 x 660 mm Speed: 10000 1 / min rapid traverse: X / Y / Z 30/30/20 m / min tool changer. 24 Pos spindle drive: 12 kW

  • Plasma cutter SATRONIK D 5000
    • Fixed Price

    SATRONIK D 5000

    Year of Make: 2010


    Working length: 11000 mm working width: 3000 mm plate thickness: 45 mm Voltage: (V) 3 x 400 50 Hz mains fuse, traege: (A) 63 Power consumption (60% ED / 100%) (kVA) 38/30 Protection / Insulation class : IP 22 / F open circuit voltage (V): 370 cutting current at 60% DC (A) 130 100% ED (A) 85 cutting thickness: - quality cut (mm) 35 (Materialabhaengig) - cut (mm) 45 (Materialabhaengig)

  • Machining Center - Horizontal DECKEL-MAHO DMC 80H linear
    • Fixed Price

    DECKEL - MAHO DMC 80H Linear

    Year of Make: 2007


    4-axis CNC machining center - Werkzeugwechsle: HSK-A63, 6Paletten, 500 x 500 mm - Compact belt filter. Fabr DMT - type KA980, Year 2007 - oil separator:.. Fabr.DMG, year 2007, Ser 2354632 - cooling device - Chip conveyor: Manufacturer: DMG.

  • Jig Grinding VEB-MIKROMAT MIKROMAT 6 S
    • Fixed Price

    VEB Mikromat MIKROMAT 6 S

    Year of Make: 1987


    - CNC: Sinumerik S3 - Table length: 1000 mm - table width. 630 mm - Max internal grinding diameter: 250 mm - Max distance table - spindle grinding:. 665 mm - angle of inclination of the tool feed infinitely variable + / - 122, 2 mrad - longitudinal travel (X-axis): 710 mm - Transversal travel (y-axis): 400 mm - travel of the vertical slide:. 510 mm - Max Winkelmit taper grinding: up to 7 degrees - vertical Risen spindle grinding: Up to 120 mm - Fahrgeschwinigkeiten (continuously): up to 5 m / min - planetary motion speeds (infinitely): C-axis from 1 u / min up to 250 u / min - Possibility Typ of grinding-spindle speeds (infinitely): from 5000 u / min up to 120000 u / min

  • 1
  • 2

Info-mailer for "Suma GmbH"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.