Please rotate your device! (and enjoy the best presentation of our products)

All categories

HESSE+CO Maschinenfabrik GesmbH

— 561
All items 2 new items
Sort by:
  • C-frame straightening press SICMI PCR 70
    18,600 € $ 19,826 £ 16,071

    Technical data Equipment Brochures pressing force: 70 to table: 700 x 500 mm Stroke: 500 mm Mounting height: 600 mm Rapid travel: 25 mm / sec. Operating speed: 5 mm / sec. Motor: 4 kW Length: 1,400 mm Width: 900 mm Height: 2,250 mm Weight: 1.900 kg 2 speeds adjustable maximal pressure gauge SICMI presses

  • Fiber laser HESSE by DURMA HD-F 3015
    332,300 € $ 354,213 £ 287,126

    Technical data Equipment Brochures cutting area: 3,060 x 1,530 mm laser power: 0,2 - 2,0 kW Wavelength: 1070-1080 nm Polarization: random Max pulse frequency: 5.0 kHz average power consumption: 25 kWh Max sheet thickness: structural steel: 12 mm.. stainless steel: 6 mm aluminum 6 mm copper: 3 mm brass: 6 mm workspaces: x-axis: 3060 mm Y-axis: 1,530 mm Z axis:. 125 mm Max sheet metal panel. 3,000 x 1,500 mm Max sheet bar weight: 1000 kg dynamics and precision: Max speed X-axis:.. 100 m / min Max speed Y-axis: 100 m / min Maximum simultaneous speed. 141 m / min Max. acceleration: 14 m / s positioning accuracy: +/- 0.05 mm repeatability: +/- 0.05 mm footprint: 11,000 x 6,000 mm length: 9,440 mm width: 2,750 mm height: 2,420 mm weight approx .: 12000 kg fiber laser HESSE HD F Made by DURMA the laser source (resonator) of HDFL laser is a YAG or solid state lasers which manages completely without laser gas. The beam transmission takes place completely unwitnessed by a flexible optical fiber

  • Pipe bender ERCOLINA Mega Bender TM76
    47,400 € $ 50,525 £ 40,956

    Specifications Equipment Max bending - E - Module:. 15 cm steel tube: 76,2 x 3,2 mm inch pipe: 2 "stainless steel tube: 76,2 x 2,2 mm Copper: 75.2 x 5.5 x 4 mm shaped tube square: 70 x 70 x 3 mm square tube (square) lying: 50 x 70 x 40 mm square tube (rectangular) standing: 70 x 50 x 3 mm max. bending radius: 254 mm min. bending radius:. 19 mm max bending angle: 190 ° speed: Variable (25 ° / sec.) engine: 5 kW length: 4,270 mm width: 900 mm height: 1,550 mm weight: 920 kg with mandrel bender length 3 m control with manuelem or automatic mode, Systhemdiagnosen, in several languages ​​USB interface for unlimited storage of bending programs, material library and job information Interactive touch screen dispays absolute (ABS), or incrementally ICN) positioning with inch or metric display programmable C axis with manueler Y and B positioning variable bending speed at 4 U / min. with automatic job detection Individual material withdrawal compensation for each bending angle Automatic shoe ret

  • hydraulic CNC plate shear HESSE by DURMA VS 4020
    89,800 € $ 95,721 £ 77,592

    Technical data Equipment Brochures Plate thickness: 20 mm Cutting length: 4080 mm Cutting angle: 0.5 - 2.5 ° Back gauge: 1,000 mm on CNC Engine power: 45 kW Throat: 350 mm Number of strokes: 4-8 1 / min Length: 5,900 mm Width: 2,250 / 3,775 mm height: 2,950 mm weight: 29,000 kg backdrop design CNC touchscreen controller D-touch 7: backgauge, cut angle, kerf, cutting length, quantity, USB port ballscrews for the back gauge collapsible balls in table side stop 1500 mm with T-slot, tilting stop and scale 3 pcs. support arms 1.000 mm with T-slot cutting line illumination light barriers on the machine back side flip up to 1,000 mm finger protection oil filling user manual in GERMAN and ENGLISH (icon photo) Hydraulic CNC guillotine shears HESSE by DURMA VS CNC production machines for flexible use in thin - and thick plates

  • Info-mailer for "HESSE+CO Maschinenfabrik GesmbH"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • Length and slitting facility EKICONTROL XSLINE 1250
    55,200 € $ 58,840 £ 47,696

    Specifications Equipment Max coil width:. 1.250 mm Max material thickness:. Structural steel 1.2mm / 2.5mm aluminum precision: ± 0.5 mm Speed: 20 mm / min total power: 4.5 kW Weight: 3000 kg Decoiler 3 ton feed Tray 2 feed rollers 5 straightening rolls 2 pairs of blades for slitting dividing shear CNC control with touch-screen drive via servomotor options. additional pairs of blades foil purity Hydraulic lift table for material output

  • mechanical cutting shear HESSE by DURMA MS 2004
    17,900 € $ 19,080 £ 15,466

    Technical data Equipment Brochures sheet thickness: 4 mm Cutting length: 2050 mm cutting angle: 1.5 ° Working speed: 42 1 / min back gauge: motorized 750mm range engine power: 7.5 kW Length: 2,550 mm Width: 2,260 mm Height: 1,330 mm Weight: 2800 kg mot. back gauge 750 mm range with digital display light barriers on the rear of the machine autom. acting downholder downholder with rubber caps 1 squaring 2 pieces sheet support arms moving footswitch user manual in GERMAN and ENGLISH We have more than 270 references! Mechanical Shears HESSE MS The fast mechanical machine

  • Conventional horizontal band saw BIANCO 370M60 ° SA
    5,690 € $ 6,065 £ 4,916

    Technical data Equipment Brochures cutting performance: 90 °: 280 mm, square 250 mm, square 370x160 mm 45 °: approximately 225 mm, square 215 mm, square 230x140 mm 60 °: 140 mm, square 140 mm, square 140x130 mm saw-band: 3120 x 27 x 0.9 mm speed: 35/70 mm working height: 830 mm motor: 0.9 / 1.5 kW dimensions: 1,700 x 1,400 x 1,490 mm transport dimensions: 1,600 x 800 x 1,500 mm weight: 350 kg manual vise with quick clamping lever lowering by its own weight with adjustable damper 2 speeds coolant system BIANCO bandsaws

  • Hydraulic Workshop Press HESSE HDPM 1070/100
    6,400 € $ 6,822 £ 5,529

    Specifications Equipment pressing force: 100 tons Engine power: 5,5 kW Stroke: 300 mm distance between columns: 1,070 mm Piston Ø: 220 x 160 mm Feed speed: 8 mm / s operating speed: 5 mm / s return speed: 10 mm / s Length: 2,050 mm width: 1,000 mm height: 2,200 mm weight: 1.500 kg of steel weldment Any stop position pressure gauge safety valve against overload 2V prisms table height adjustable table on - exhaust device control with operating lever according to CE regulations manual in GERMAN and ENGLISH

  • Drilling-milling machine FRAESPOWER BF 45 A plus
    3,899 € $ 4,157 £ 3,369

    Specifications Equipment Table: 820 x 240 mm working area: 550 x 200 x 120 mm Shot: MT 4 Speeds: 50-2520 (12) U / min. Engine: 1.1 / 1.5 kW drilling capacity: 32 mm Distance spindle-table: 415 mm Weight 310 Kg drilling milling machine Dovetail motorized height adjustment of the drilling milling head automatic spindle feed automtischer feed in the X-axis thread cutter 3-axis Digital display mechanical stage 820 x 240 mm spindle feed via hand wheel for milling and star grip for drilling 2 pcs Reduction sleeves MK4 / 3 and MK 3/2 machine and equipment according to the CE regulations manual in GERMAN and ENGLISH option:. surcharge for undercarriage: € 230, -

  • Welding and assembly table HESSE Starter Set
    1,330 € $ 1,417 £ 1,149

    Technical data Equipment Brochures Weight: ~ 100 kg Accessories for HMT and HST series consisting of: 1 x Accessories Cart 2 x stop bracket 350 x 20 mm 2 x stop angle adjustable 250 mm 10 x Verstellspanner 2 x Multi Spanner 4 x Stand angle adjustable 175 x 20 mm 4 x stop bar 225 x 20 mm x 8 socket pin 4 x plug holder 2 x claw clamp bolt welding and assembly tables

  • Bench drill ERLO SV 18
    • Fixed Price

    ERLO SV 18

    5,137 € $ 5,475 £ 4,438

    Technical data Equipment Brochures drilling capacity steel 18 mm tapping capacity steel: M18 speeds: A) 120-760 B) 170-1100 C) 400-2580 D) 600-3800 E) 950-6000 U / min Engine: 1.1 kW Up : MK 3 Quill stroke: 120 mm overhang: 250 mm distance spindle-table: 200 - 530 mm table: 270 x 270 mm width x depth x height: 1,030 x 600 x 1,950 mm weight 230 kg Manual feed Electronic speed variator Fixer table with T -grooves, height-adjustable and rotating cutter head undercarriage with door and drawer lighting tool ejector emergency stop button rotation switch gear according to "CE" options: threading attachment € 365, - a digital display of the rpm € 438, - alternative: SVR 18 (as above but with coolant system): € 5618, - ERLO column drills

  • Motor / Hydraulic Folding Machine HESSE AMH 3135
    35,500 € $ 37,841 £ 30,674

    Technical data Equipment Brochures bending length: 3.100 mm max. Sheet thickness steel (420 N / mm²): 3.5 mm max. Plate thickness Niro: 2.5 mm bending angle: 0 - 135 ° Motor power: 3.7 kW Length: 4,300 mm Width: 1,770 mm Height: 1,890 mm Weight: 4520 kg hydraulic drive NC control for bending angle preselection manual back gauge 600 mm continuous straight rail 45 ° intent angle 75 mm mechanical end position of the clamping cheek clamping force adjustment according to CE alternative: AMH-K, split straight rail 45 ° € 37,400 - option:. 2 axes NC controller Schneider with 7 "touch screen including motorized back gauge 800 mm EURO 12.400, - ( symbol photos) HESSE bending machines

  • conventional press brake HESSE HOL-40E1250
    21,100 € $ 22,491 £ 18,231

    Specifications Equipment bending length: 1.250 mm bending force: 40 to upper tool: yes lower tool: yes backgauge: 5 - 420 mm Stroke: 100 mm Mounting height: 310 mm Motor: 6 kW oil tank: 38 l Speed: 10 mm / s return speed: 12 mm / s backgauge speed: 40 mm / s precision press beam: +/- 0.02 mm Genaigkeit backgauge: +/- 0.05 mm length: 1,750 mm width: 950 mm height: 1,900 mm weight: 1640 kg Motorised back gauge with pushbutton and counter press depth adjustment by pushbuttons, with digital display intermediate clamps for upper tool punch 1010/75 / R0,8 / 105 1x835 mm + 1x835 mm divided die 2009/85 ° (V16 / 22/35/50 mm) divided 1x835 mm + 1x835 mm 2 Blechauflegarme oil filling pedal according to CE regulations user manual in GERMAN

  • Schweißkantenabschrägmaschine SIMASV SP12V
    7,300 € $ 7,781 £ 6,307

    .. Specifications Equipment Max Abschrägtiefe (400 N / mm²): 18 mm at 30 ° Max Abschrägtiefe (500 N / mm²): 15 mm at 30 ° Plate thickness: 6 - 40 mm Motor power: 0.8 kW Abschräggeschwindigkeit: 3 m / . min min Abschrägdurchmesser for plate: 610 mm standard bevel angle: 22 ° 30 ', 30 °, 37 ° 30', 45 °, 55 ° 105 kg Solid, mobile machine Its compact dimensions and low weight, it can very well clamped at the abzuschrägenden parts, without requiring them to be moved Max. chamfers of 18 mm (400 mm), with a cutting speed of 3 m / min clockwise and counterclockwise rotation of the cutting mill with dual controls with emergency system Different angle by tilting the Blechleitrollen 1 set cutting wheels for carbon steel pins for variable angle operating instructions in English or German CE

  • Horizontal-Bandsägevollautomat HESSE BMSO 360 C
    14,800 € $ 15,775 £ 12,788

    Specifications Equipment cutting performance: 90 °: 380 mm, 380 mm square, rectangular 430 x 380 mm saw-band: 4800 x 34 x 1.1 mm Infinitely variable belt speed: 20-100 m / min. Working height: 590 mm Motor: 3 kW material feed motor: 0,55 kW Coolant system: 0.12 kW Length: 2,900 mm Width: 950 mm Height: 1,660 mm Weight: 1342 kg 1.2 m roller conveyor Chip brush control panel Hydraulic vice Optical height adjustment Hydromechanical band voltage inverter Mechanical upper clamping material limitation bay cooling pump bandsaw safety switch gear pressure setting

  • C-frame eccentric press WMW / Ambold PEEV40.1
    9,700 € $ 10,339 £ 8,381

    Specifications Equipment pressing force: 40 to table: 580 x 450 mm Stroke: 8 - 88 mm Working speed: 145 1 / min. Motor: 3 kW ram adjustment: 55 mm Overhang: 195 mm Mounting height: 332 mm Length: 1,110 mm Width: 1,420 mm Height: 2,150 mm Weight: 2.700 kg Height adjustable table manual stroke adjustment ram adjustment by lever (round bar) electro-pneumatic clutch-brake combination single and continuous foot pedal and 2 hand control mechanical overload protection No operating instructions (dimensions without cabinet) not comply with the German & Austrian UVV

  • motorized 3-roll bending machine HESSE HRM 1050 x 90
    4,600 € $ 4,903 £ 3,974

    Technical data Equipment Brochures bending capacity: 3 mm pre-bending: 2 mm bending length: 1.050 mm roll diameter: 90 mm Motor power: 1.1 kW Roll speed: 6 m / min Length: 1,630 mm Width: 700 mm Height: 1,200 mm Weight: 480 kg Asymmetrical roller assembly 2 rolls by brake motor driven lateral roll adjustable by handwheel upper roll conical rolling double foot for right-left lower and lateral roll with longitudinal grooves in hardened rolls user manual in GERMAN Mot./Man. 3-roll bending machine HESSE HRM / HRS

  • Welding and assembly table HESSE HST 80/35 M
    2,260 € $ 2,409 £ 1,952

    Technical data Equipment Brochures work area: 2,480 x 1,230 mm Thickness of worktop: 35 mm Table height: 800 mm Carrying capacity: 2000 kg perforation: Ø 28 mm Weight: 495 kg 3D System Welding Table perforated table top solid base in 8 mm square profile M16 leveling feet 0-70 mm worktop ST52 option: ST 52 hardened worktop 60 Rockwell € 430, - welding and assembly tables

  • Welding and assembly table HESSE HMT 80/20 L
    3,300 € $ 3,517 £ 2,851

    Technical data Equipment Brochures work area: 2,980 x 1,480 mm Thickness of worktop: 20 mm Table height: 800 mm Carrying capacity: 2.000 kg Weight 820 kg Mounting table solid base in 8 mm square profile M16 leveling feet 0-70 mm worktop ST52 (symbol photo shows Mod. HMT 80/20 S) welding and assembly tables

  • Pipe sander HESSE HBT 114 S
    7,300 € $ 7,781 £ 6,307

    Specifications equipment working capacity Ø: 10-114 mm Number of loops: 2 rotational speed of the grinding: 3-22 m / s belt dimensions: (2x) 50 x 940 mm Motor power: 5 kW Weight: 265 kg For grinding and polishing for round and oval pipes Open the belts by foot pedal machine and equipment according to the CE regulations manual in GERMAN and ENGLISH

  • CNC press brake HESSE by DURMA AD-R 25100
    41,650 € $ 44,396 £ 35,988

    Technical data Equipment Brochures bending length: 2.550 mm bending force: 100 to mounting height: 530 mm Stroke: 265 mm Overhang: 410 mm axes: Y1 / Y2 / X axis upper tool: 75 ° cranked, divided lower tool: 4-V die 16, 22, 35 and 50 mm anti deflection: yes, motorized via CNC adjustable back gauge: CNC controlled motor power: 11 kW length: 3,800 mm width: 1,670 mm height: 2,750 mm weight: 8.900 kg 3 axes (Y1, Y2 and X axis) CNC cONTROL DT-10 incl. PC software - 2D graphics display 10 "- Intuitive touch-screen operation (simple drawing of the bending contour with finger) - Direct programming of the bending angle - user-friendly programming in dialogue form - graphic simulation of the bending process - Automatic calculation of the extended length of the blank sheet size - graphical product and tool storage - correction facility - manual, semi- and fully automatic operating mode - tonnage calculation / programming the CNC - Internal memory - USB ports for backup and program outsourcing CNC

  • CNC press brake HESSE by DURMA AD-R 40320
    85,290 € $ 90,914 £ 73,695

    Technical data Equipment Brochures bending length: 4.050 mm bending force: 320 to mounting height: 630 mm Stroke: 365 mm Overhang: 410 mm axes: Y1 / Y2 / X and R axis upper tool: 75 ° cranked, divided lower tool: 4-V die 16, 22 , 35 and 50 mm anti deflection: yes, motorized via CNC adjustable back gauge: CNC controlled motor power: 37 kW length: 5,300 mm width: 1,910 mm height: 3,230 mm weight: 21.000 kg 3 axes (Y1, Y2 and X axis) CNC cONTROL DT . -10 including PC software - 2D graphics display 10 "- Intuitive touch-screen operation (simple drawing of the bending contour with finger) - Direct programming of the bending angle - user-friendly programming in dialogue form - graphic simulation of the bending process - Automatic calculation of the extended length of the sheet metal blank - Graphical product and tool storage - correction facility - manual, semi- and fully automatic operating mode - tonnage calculation / programming the CNC - Internal memory - USB ports for backup and program

  • CNC press brake HESSE by DURMA AD-R 30175
    59,610 € $ 63,541 £ 51,506

    Technical data Equipment Brochures bending length: 3.050 mm bending force: 175 to axes: Y1 / Y2 / X / R and axis upper tool: 75 ° cranked, divided lower tool: 4-V die 16,22,35 and 50 mm anti deflection: yes, CNC controlled back gauge: CNC controlled motor power: 18.5 kW length: 4,250 mm width: 1,700 mm height: 2,750 mm weight:. 11,500 kg 4 axes (Y1, Y2, X and R axis) CNC cONTROL DT-10 including PC software - 2D graphic display 10 "- Intuitive touch-screen operation (simple drawing of the bending contour with finger) - Direct programming of the bending angle - user-friendly programming in dialogue form - graphic simulation of the bending process - Automatic calculation of the extended length of the blank sheet size - Graphical product and tool storage - correction facility - Manual, semiautomatic and fully automatic operating mode - tonnage calculation / programming the CNC - Internal memory - USB ports for backup and program outsourcing CNC controlled back gauge with linear guide and b

  • CNC press brake HESSE by DURMA AD-S 40320
    96,200 € $ 102,543 £ 83,122

    Technical data Equipment Brochures bending length: 4.050 mm bending force: 320 tons axes: Y1 / Y2 / X and R axis upper tool: 75 ° cranked, divided lower tool: 4-V die 16,22,35 and 50 mm anti deflection: yes, motorized via CNC adjustable back gauge: CNC controlled motor power: 37 kW length: 5,300 mm width: 1,910 mm height: 3,230 mm weight: 21,000 kg plus + - high-quality 3D graphic control - Higher Hinteranschlagsgescwindigkeit - Expandable option scope Standardausrüsung: 3D graphic control Cybelec ModEva 15T (touch screen) for Y1, Y2 , X and R axis with bend sequence calculation, numerical display and graphics backgauge controlled with servo motors on linear guide and ballscrew shared cranked upper tool 1010 / A / 75 ° 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) anti deflection motorized, via CNC adjustable Blechauflegarme on linear guide laser safety device on the upper bar oil filling user manual in GERMAN and ENGLISH (icon photo) options. in addition, controlled axes of back g

  • CNC press brake HESSE by DURMA AD-S 30135
    67,100 € $ 71,524 £ 57,978

    Specifications Brochures bending length Equipment: 3.050 mm bending force: 135 to axes: Y1 / Y2, X and R axis upper tool: cranked 1010 / A / 75 ° divided lower tool: 4-V die 60x60 2009 (V = 16,22,35 and 50 mm) crown: CNC controlled back gauge: CNC controlled motor power: 15 kW length: 4,200 mm width: 1,680 mm height: 2,750 mm weight: 10,500 kg plus + - high-quality 3D graphic control - Higher Hinteranschlagsgescwindigkeit - Expandable option scope Standardausrüsung: 3D graphic control Cybelec ModEva 15T (touchscreen ) for Y1, Y2, X and R axis with bend sequence calculation, numerical display and graphics back gauge with servo motors controlled on linear guide and ballscrew shared cranked upper tool 1010 / A / 75 ° 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) anti deflection motorized, via CNC control adjustable Blechauflegarme on linear guide laser safety device on the upper bar oil filling user manual in GERMAN and ENGLISH options. in addition, controlled axes of back gauge X1 /

  • CNC press brake HESSE by DURMA AD-S 2060
    50,200 € $ 53,510 £ 43,375

    Technical data Equipment Brochures bending length: 2.050 mm bending force: 60 to axes: Y1 / Y2, X and R axis upper tool: 1010 / A / 75 ° divided cranked: 4-V die 60x60 2009 (V = 16,22,35 and 50 mm) crown: CNC controlled back gauge: CNC controlled motor power: 7.5 kW length: 3,200 mm width: 1,200 mm height: 2,350 mm weight: 3550 kg plus + - high-quality 3D graphic control - Higher Hinteranschlagsgescwindigkeit - Expandable option scope Standardausrüsung: 3D graphic control Cybelec ModEva 15T (touch screen) for Y1, Y2, X and R axis with bend sequence calculation, numerical display and graphics back gauge with servo motors controlled on linear guide and ballscrew shared cranked upper tool 1010 / A / 75 ° 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) anti deflection motorized, via CNC control adjustable Blechauflegarme on linear guide laser safety device on the upper bar oil filling user manual in GERMAN and ENGLISH (icon photo) options: in addition controlled axes of back gauge X1 / X

  • Long folding machine BEND MASTER BMTH 8.1,25
    • Fixed Price

    Long folding machine BEND MASTER BMTH 8.1,25

    Year of Make: 1983


    Specifications Equipment Bending capacity: 1.25 mm Effective length:. 8.020 mm Max opening further the upper beam: 190 mm Number of stand Spannarmeinheiten: 7 Number of clamping cylinder: 7 Number of bending cylinders: 7 Total number of flexures: 7 Engine power: 3.0 kW Length: 9,200 mm width: 1,300 mm height: 1,300 mm weight: 2800 kg BJ 1983 / engine is being overhauled Digital bending angle adjustment - control BMS 9 EMC Electric cutting machine 2 pedals Meets current AMVO and UVV (symbol photo shows Mod 6.1,25.)

  • Lathe BERNARDO Goliath 660
    • Fixed Price

    Lathe BERNARDO Goliath 660

    Year of Make: 2007

    14,500 € $ 15,456 £ 12,528

    Specifications Equipment Center height: 330 mm Distance between centers: 2000 mm spindle bore: 105 mm Speed: 36-1600 (16) U / min Swing over bed: 660 mm Diameter above crank: 870 mm turning diameter over bed slide: 420 mm bed width: 400 mm tailstock quill Ø : 72 mm tailstock length: 150 mm tailstock seat: MK5 motor power: 8 KW length: 3,500 mm width: 1,400 mm height: 1,650 mm weight: 3870 kg with 3-axis digital display Eason ES-8 Lathe with bridge 3-jaw chuck 325 mm face plate 600 mm fixed Lynette follower Lynette coolant system Quick change tool post with 4 pcs. toolholder spindle reducing on MK5 footbrake mechanical multi-plate clutch rapid traverses along and plan halogen lamp chips backplane Threading gauge stop shaft with adjustable cams operating instructions in English Meets the present industrial safety regulation (AMVO & UVV)

    Specifications Equipment Bending capacity: 2 mm bending length: 1.050 mm Upper roll diameter: 75 mm Length: 1,930 mm Width: 700 mm Height: 1,160 mm Weight: 300 kg neu / Year 2014 with base asymmetrical rolls arrangement with pre-bending wire core groove in the bottom roller and back roller delivery of lower roller central lever with back gears user manual in GERMAN and ENGLISH (symbol photo shows mod. HR 1050 x 56)

  • Lathe ZMM CU 500 M
    31,580 € $ 33,662 £ 27,286

    Technical data Equipment Brochures Center height: 250 mm turning diameter over bed: 500 mm Distance between centers: 1500 mm spindle bore 72 mm Bed width: 400 mm Speeds: 20 - 2,000 r / min. (21) longitudinal feed: 0.04 to 12 mm / U cross feed 0,02 - 6 mm / U Engine: 7.5 / 11 kW weight 2.950 kg Drive over manual 3-axis Digitlanzeige quick change tool 3-jaw chuck standing and follower Lynette footbrake (icon photo) ZMM lathes

  • Tool grinding JINGLE NB
    • Fixed Price

    Klingel NB

    Year of Make: 1973

    2,700 € $ 2,878 £ 2,332

    Specifications Equipment Table size: 550 x 180 mm grinding wheel: 350/338 x 125 x 165 mm Length: 1,700 mm Width: 1,000 mm Height: 1,400 mm Weight 740 kg 4 workstations 2 separate engines coolant device main grinding station with variator 16 - 25 m / s and clockwise / anticlockwise and 2 extra discs Läppstation with 2 speeds and clockwise / anticlockwise (washers) main grinding station with 2 grinding wheels and each 1 table 550 x extra 180 mm with T-slots and tilt and swing function Läppstation with table 200 x 210 mm with T-slots extra, rotated, swiveled, tilted and height adjustable Läppstation with table 300 x 185 mm with T-slots not and extra tilt and swing function without user manual Complies with the present industrial safety regulation

  • hydraulic CNC plate shear HESSE by DURMA VS 3020
    73,200 € $ 78,027 £ 63,249

    Technical data Equipment Brochures Plate thickness: 20 mm Cutting length: 3080 mm Cutting angle: 0.5 - 2.5 ° Back gauge: 1,000 mm on CNC Engine power: 45 kW Throat: 350 mm Working speed: 6-12 1 / min Length: 4,100 mm Width: 2,300 / 3,700 mm height: 2,650 mm weight: 21,500 kg backdrop design CNC touchscreen controller D-touch 7: backgauge, cut angle, kerf, cutting length, quantity, USB port ballscrews for the back gauge collapsible balls in table side stop 1500 mm with T-slot, tilting stop and scale 2 pcs. support arms 1.000 mm with T-slot cutting line illumination light barriers on the machine back side flip up to 1,000 mm finger protection oil filling user manual in GERMAN and ENGLISH (icon photo) Hydraulic CNC guillotine shears HESSE by DURMA VS CNC production machines for flexible use in thin - and thick plates

  • Motor / Hydraulic Folding Machine HESSE AMH 2565
    35,100 € $ 37,414 £ 30,328

    Technical data Equipment Brochures bending length: 2.540 mm max. Sheet thickness steel (420 N / mm²): 6.5 mm max. Plate thickness Niro: 4.5 mm bending angle: 0 - 135 ° Motor power: 7.4 kW Length: 3,900 mm Width: 1,750 mm Height: 2,050 mm Weight: 6200 kg hydraulic drive NC control for bending angle preselection manual back gauge 600 mm continuous straight rail 45 ° intent angle 75 mm mechanical end position of the clamping cheek clamping force adjustment according to CE alternative: AMH-K, split straight rail 45 ° € 37,000 - option:. 2 axes NC controller Schneider with 7 "touch screen including motorized back gauge 800 mm EURO 11.900, - ( symbol photos) HESSE bending machines

  • Conventional horizontal bandsaw SAEGEPOWER BS 170 G
    1,620 € $ 1,726 £ 1,399

    Specifications Equipment Consumables capacity round 90 °: 170 mm rectangular 90 °: 170 x 210 mm 45 °: 120 mm square 45 °: 110 x 110 mm motor: 0,55 / 0,75 kW speed 40/80 m / min belt dimensions: 2.085 x 0.9 x 20 mm length: 1,120 mm width: 600 mm height: 1,500 mm weight: 200 kg adjustable lowering by damping cylinder engine with 2 speeds coolant system scale at the vice for miter vice with quick action leg locks user manual in GERMAN and ENGLISH We have more than 130 references! Band saw blades for band saw - BS 170 G - € 35, - saw blades for band saw - BS 170 G - € 38, -

  • Lathe TURNING POWER DP 410/1000
    10,800 € $ 11,512 £ 9,331

    Specifications Equipment Center height: 205 mm Distance between centers: 1000 mm spindle bore 58 mm speeds: 25 - 2,000 (12) U / min. Engine: 5.5 kW Bed width: 300 mm turning diameter over bed: 410 mm turning diameter over cross slide: 220 mm Turning Ø without bridge: 640 mm spindle taper: MK 6 Tailstock taper: MK 4 Metrischgewinde: 0,1 - 14 results (41) mm length: 2,170 mm width: 1,130 mm height: 1,510 mm weight: 1670 kg new / Year 2014 3-axis digital display removable bridge quick change tool fixed Lynette follower Lynette 3-jaw chuck Ø 250 mm 4-jaw chuck Ø 300 mm face plate Ø 350 mm incl . receiving flange coolant system halogen work light cured footbrake operating tools and hardened ground bed and ground gear wheels machine and equipment according to the CE regulations manual in GERMAN and ENGLISH

  • Bending machine TOOL POWER MB 30 x 8
    290 € $ 309 £ 250

    Specifications Equipment mild steel round steel 16 mm, square steel 13x13 mm, flat steel 30x8 mm Wrought Iron: round steel 12 mm, square steel 10x10 mm, flat steel 30x6 mm Bronze / Copper: round steel 16 mm, square steel 12x12 mm, flat steel 30x8 mm aluminum: round steel 18 mm, square steel 15x15 mm, 30x10 mm flat steel weight: 20 kg Universal bending machine for angular, round, tire and Sprialbiegen bending use spiral-bending using bending plates material stop

  • Lathe TURNING POWER DP400 / 1000
    6,900 € $ 7,355 £ 5,962

    Specifications Equipment Center height: 200 mm Distance between centers: 1000 mm spindle bore 52 mm speeds: 55-2000 (18) U / min. Engine: 1.5 / 2.4 kW Bed width: 218 mm turning diameter over bed: 400 mm Length: 1,800 mm Width: 800 mm Height: 1,650 mm Weight 850 kg 3-axis digital display with bridge quick change tool post with 4 inserts for square tools solid follower Lynette Lynette 3-jaw chuck Ø 200 mm incl. 1 yarn. Change jaws 4-jaw chuck Ø 200 mm face plate Ø 280 mm incl. Mounting flange coolant system halogen work lamp foot brake and additional electrical brake lathe chuck protection Operating tool machine and equipment according to the CE regulations 2 fixed grains spindle reducing user manual in ENGLISH and GERMAN

  • C-frame eccentric HESSE CDCS 630 P81
    39,200 € $ 41,785 £ 33,871

    Technical data Equipment Brochures pressing force: 63 to table: 750 x 500 mm clutch: fins triggering: pneumatic stroke: 4 - 102 mm Number of strokes: 54 strokes / min Motor: 7.5 kW Distance table ram: max. 350 mm Aufspannzapfendurchm .: 50 mm Overhang: 270 mm ram surface 490 x 325 mm hole in the table: 170 mm opening in the stand: 440 mm Length: 1,850 mm Width: 1,100 mm Height: 2,370 mm Weight: 4100 kg 8-fold ram guide mechanical work space shield, manual stroke adjustment ram adjustment ratchet geared driven electro-pneumatic clutch-brake combination fixed table single and continuous foot pedal and 2 hand control mechanical overload protection manual central lubrication machine and equipment according to the CE regulations and the Austrian and German accident prevention regulations user manual in GERMAN and ENGLISH (icon photo) option: photocell EURO 2.510, - platen EURO 1.430, - We have more than 40 references! HESSE eccentric

Info-mailer for "HESSE+CO Maschinenfabrik GesmbH"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.

Sales format

Rate this auction house!

0.0 (0)
Thank you!
You have already rated.
Rating is not available. Try again later.