Please rotate your device! (and enjoy the best presentation of our products)

All categories

Genten Machines

— 2,003
Sort by:
  • Rash gutter ACME 5150x1800mm
    • Fixed Price

    Rash gutter ACME 5150x1800mm

    Belgium | Amel


    Type R3200-6 Serial No: 9106 431 Weight: 5000 KG Auss. from. : L 5150mm, width 2400mm, H 2190mm useful variable L 5150mm, width 1800mm x H 600 mm 2 vibration motors FRIEDRICH series No. 9,106,431, 8Kw, 220 / 380V, 980T / min, 2 motors each with 1700kg centrifugal, or 17000 N rust from strong beams, spacing in the middle of 105 mm and on the sides of 145 mm.

  • Vibrating feed chute 2170x800 mm.
    • Fixed Price

    Vibrating feed chute 2170x800 mm.

    Belgium | Amel


    Weight: +/- 300 kg Aussenabm. L 2170mm, 1200mm largeur, hauteur 940mm Innenabmess. 2170mm, 800mm +/- largeur, hauteur +/- 200mm Engine Make ITALVIBRAS 2 x 0.7 Kw Type MVSI Serie n ° 258631 220/380 V. very flat, two motors behind, outlet over cone in tube

  • Resonant vibrating conveyor 6800 x 600mm

    Weight: ± 3.000kg Außenab .: L 6950mm, 900mm B, H 910 / 1820mm; Nutzan .: L 6800mm, B 600mm Motor: 7.5kW 220 / 380V 1445 t / min. Drive about 4 wedge Riehmen on coil and leaf springs (see scale drawing in Appendix)

  • Info-mailer for "Genten Machines"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • Double Tellerschleifmaschine 2 x 800 mm, 2 speeds
    • Fixed Price

    LADONIO LV800

    Belgium | Amel


    Brand: Londonio Type: LV800 serial number: 83660 Year: 1988 Weight: ± 600 kg Dimensions: 1460 mm x 1000 mm x 1280 mm Engine Power 220/380 V with 2 speeds with 2 tables 985 mm x 400 mm, adjustable to 45 ° Graduated with a small built-in exhaust fan sanistations dust with on-off switch

  • Core sand mixer 135 liters = 200 kg Badie

    Brand MIXTENSIF, Type KSU 200, built in 1989, 650kg External dimensions: 1200 mm x 1200 mm, height 1800 mm Ø tank: 850 mm, height 550 mm Engine Make MERGER, Type MM 132 M4, 7.5 kW, 10 PS, 220 / 380 V, 20/144 A with two pneumatic drop doors, with lid

  • Auger L. 1780mm, Ø 150mm trough shape
    • Fixed Price

    Auger L. 1780mm, Ø 150mm trough shape

    Belgium | Amel


    External dimensions: L. 2530mm, width 280mm, height 3700mm Motor: BAUER 1 kW, 0.75 hp, 930 r / min input & 31 U / min output, 380 V center distance between input and output: input 1780mm Ø 150 mm axle Ø 45mm output Ø 150mm spiral of screw 130mm above open

    Type: 2275, Weight: ± 800 kg Dimensions: 1750 mm x 1300 mm, H 1800 mm Usable dimensions: Ø 800 mm, H 1000 mm / height + - 800 mm.ohne increasing content + - 1250 kg 2 drains with heat shield without crane eye However, with a solid axle between the trusses (saves height) pan and refractory lining in good condition

  • Föder- and dosing 1000 x Ø 150mm
    • Fixed Price

    Föder- and dosing 1000 x Ø 150mm

    Belgium | Amel


    Weight: ± 100 kg; Außenab .: L 1800mm, B 600mm, T 520mm; Nutzab .: L 1000mm, Ø 150mm Motor: Brand LEROY SOMER, type gearbox, 1.1kW 910 / 33.3 t / min, 220 / 380V direct drive straight, filling opening 140 x 140, with control and emptying flap including Ø 150mm. outlet Ø 150mm

  • Out grid 2000 mm x 2000 mm (spare parts)

    Weight: +/- 2000 kg External dimensions: 2400 mm x 2300 mm, H. 1250 mm through hole from rust: 90 mm x 40 mm starting from the bottom: 1100 mm x 1100 mm The rust is new (upper part) replacement for S3034 & S1232

  • Doppelschleifbock DÜRR SCHMIDT, 760 mm x 76 mm
    • Fixed Price

    Dürrschmidt K2iR160L

    Belgium | Amel


    Weight: 2360 kg External dimensions: 1900 mm x 1400 mmx 1350 mm Motor VEM, Type K2iR160L, 15 kW, 1460 rev / min, 380/660 V 63 m / s Stein Ø 760 mm, width 76 mm, hole Ø 304.80 drive through step pulleys, 3 speeds shelf plate: 340 mm x 240 mm suction from below with emergency stop switch

  • Doppelschleifbock MAPE, Ø 500 mm x 60 mm
    • Fixed Price

    Mape KPER122M2QU15252C4

    Belgium | Amel


    Außemaße: 2050 mm x 1100 mm, 1200 mm H 2 engines, brand VEM / ALMO, Type KPER122M2QU15252C4 Ser. 3217811091113834, 4 + 7.5kW, 2880 + 2870 U / min, 380/660 + 400/660 V 2 speeds by stages disc, 2 trays 500 mm, width 220 mm

  • Molding machine OSBORN, Type 719 RF
    • Fixed Price

    OSBORN 719 RF

    Belgium | Amel


    Serial Number: 70-21 Weight: 3300 kg Table: 964 mm x 584 mm Maximum chest width: 950 mm press stroke: 183 mm Abhebehub: 330 mm pressing power: 15000 kg excess Holt, with new Zweihandsteuerrung

  • Single disc sander 600mm ELAN with filter
    • Fixed Price

    ELAN LD600

    Belgium | Amel


    Brand ELAN Type LD600 Series No. 8393 Weight ± 200 hg External dimensions: 1100 mm x 1100 mm x height 1350 mm Ø 600mm grinder ASYNCRONE Type: L43, 225 kW, 220/380 V, 3 hp, 1430 U / min with small Schlauffilter ( 6 cartridges), aspirator 1.1 kW, 220/380 V, cartridges Ø 120 mm, length 700 mm with adjustable table, graduated with shelves, a side by 45 ° adjustable shelf board: length 850 mm x width 300 mm, with replacement plate with 2 speeds by belt drive with emergency stop fan aSYNCHRONOUS, Type L21.5, 1.1 kW, 220/380 V, 2810 U / min

  • Bunker 35 m³
    • Fixed Price

    Bunker 35 m³

    Belgium | Amel


    External dimensions :: 3300 x 3000 x 4850 mm H Viewing Area: 3000 x 2750 x 4850 mm H cone 2400 x 500 mm L, with scaffolding not very high, without the withdrawal tape which is selling separately

  • Double girder crane bridge 5 tonnes, brand VOSS / DEMAG
    • Fixed Price

    VOSS / DEMAG 4463

    Belgium | Amel


    Wheelbase: 12260 mm measured from the crane track rail upward, the crane is 1670 mm above, is thus slightly higher 4 leg lifting speeds: 4 m / min and 0.4 / min cable P212H74 / 1 Year: 1979

  • Sandsilo 33 m³ corresponds to approximately 50 t

    Weight: +/- 3000 kg Outside: Ø 2400 mm, H. 10380 mm Usable dimensions: Ø 2300 mm, H. 7500 mm Wheelbase: 1660 mm with a level sensor on the roof and manhole with 4 feet: 2600 mm height under the cone these can be removed if necessary for denTransport Without ladder, railings, filler pipe and valve at the outlet

  • Conveyor belt 10600 mm x 760 mm
    • Fixed Price

    Conveyor belt 10600 mm x 760 mm

    Belgium | Amel


    Weight: 1000 kg Dimensions: 11100 mm x 1220 mm, height 650 mm inner dimensions: L. 10600 mm, width 760 mm drum motor brand BAUHR, Type DT445, 3.75 kW, 380 V between the roller axis: 10600 mm x 760 mm Width: 760 mm Ø rolls and motor-tensioner: 450 mm with scraper, tray support for holding the tape centrally with wheels, mounted on steel frame, U-shaped 5 x roller supports for iron rollers, 1 x for Diverse, 1 x roll in rubber with small bunkers sand input 1000 mm x 600 mm x 200 mm

  • Ladle 4 tonnes - 4.5 tonnes
    • Fixed Price

    Ladle 4 tonnes - 4.5 tonnes

    Belgium | Amel


    Overall dimensions: width 2200 mm, 2600 mm H. Usable dimensions: Ø 1085mm, H. 1200 mm with oil bath gearbox (N.3) Like new condition Weight: 700 kg

  • Ladle SENSE BRENNER, 5 tons, with planetary gear

    External dimensions: 2300 mm, H. 2250 mm internal dimensions: diameter 1240 mm, H. 1200 mm with 2 Syphonausgüssen Year: 1986, Transmission Serial Number: 455108 In good condition weight: 1300 kg Towing without crane Eye With strong Kingpins between the traverses, spaced 150 mm , Ø 75 mm

  • Withdrawal belt EA 4200 X 720mm
    • Fixed Price

    Withdrawal belt EA 4200 X 720mm

    Belgium | Amel


    Außenabm .: 4800 x 1250 x 1050 mm, usable area: EA 4200 x 720 mm; Keywords: 900 mm gear motor, center distance of the rolls 155 mm, mounted on 4 feet may be suitable for transport and sorting, with operation and safety stop. Chain drive. In good condition.

  • Sand transmitter KLEIN, 200 liters
    • Fixed Price

    Sand transmitter KLEIN, 200 liters

    Belgium | Amel


    Type: S200, serial number: 6551 Year: 1972, Weight: ± 250 kg Dimensions: 800 mm x 750 mm, 1900 mm H. 3 sand inputs, Ø 150 mm 1 sand output, Ø 70 mm with a Niveuasonde with Durckregler

  • Suspension Magnet 1.7 kW
    • Fixed Price

    Suspension Magnet 1.7 kW

    Belgium | Amel


    Brand: SIME LENOIR, Type: OVE XV, series 90695 Weight: 1500 kg External dimensions: L 3100 mm, width 1600 mm, H. 750 mm internal dimensions: L 1070, Br 900 mm, H. 420 mm center distance. 2100 mm roll width : 1200 mm, Ø 600 mm with Alustegen: width 800mm - voltage 220 V

  • Fan (Fan) 2.4kW
    • Fixed Price

    Fan (Fan) 2.4kW

    Belgium | Amel


    Type: GEA, Serial No .: tgf08.06.42c, Year: 1998, Weight: 50kg external dimensions: L = 1100mm, B = 1100mm, H = 500mm usable area: Diameter = 900mm 2.4kW 220 / 380V 1000Umdrehungen / min 50Hz fan diam. 900mm, 1000 rpm To be used for cooling of castings

Info-mailer for "Genten Machines"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.