- Fixed Price
Switzerland | Bottighofen
Year of Make: 1995
Switzerland | Bottighofen
Year of Make: 1995
Switzerland | Eriswil
Year of Make: 1962
The machine is in good condition, ready for operation. The machine is in good condition, ready for operation. The machine is in good condition, ready for operation. Spare parts / Service MATEC CH-4952 Eriswil / DE-79618 Rheinfelden We reserve the right to make alterations, mistakes and misprints! MATEC system + technik GmbH Mechanical Engineering Mühlematte 4 CH-4952 Eriswil / Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Year of Make: 2003
Condition: The machine has been regularly maintained and is in very good condition | Offered type: used machine | Operating mode: Fully automatic hydraulic | NC control: NC axis for workpiece length | Saw blade D min .: 210 mm | Saw blade D max .: 250 mm | Bore D: 40 mm | Cutting range: 10-75 mm | Cutting length: 5-900 mm | Speed: 10-14-20-28 rpm | Feed rate: Infinitely 0-40mm / sec. | Accessories: Coolant reservoir | Shippingtime: on stock, subject to prior sale | Price: upon request | Pricing: ex location, unpacked, uninsured | Payment: 100% before delivery | Guarantee: No guarantee
Switzerland | Bottighofen
Year of Make: 1989
Info-mailer for "Saws"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Year of Make: 1989
Condition: Machine is in good condition and was in production until October 2016 | Type of offer: Used machine | Saw Blade Diameter: 250 mm | Speeds: 10/14 rpm, 20/28 rpm | Cutting range: D 5 to 75 mm | Sawfeed: 0 -40 mm / s | Section length: 5 -1200 mm | Replenishment rate: 0 -300 mm / s | Return stroke: 250 mm / s | Accessories: Coolant system | Delivery time: In stock, Subject to prior sale | Price: on Request | Pricing: From location, unpacked, unsecured loaded on truck | Payment: 100% before delivery | Guarantee: No guarantee
Year of Make: 1995
Condition: Good condition and ready for operation | Type of offer: Used machine | Cutting range: Round Diameter 260 mm | Smallest dimension: Diameter 10 mm | Smallest section length: 6 mm | Automatic feed length: 600 mm | Cutting speed: Steplessly adjustable 15-125 m / Material feed: Hydraulic adjustable | Saw blade dimensions: 4115x32x1.1 mm | Accessories: Coolant device | Delivery: In stock, Subject to prior sale | Price: On request | Pricing: ex location, unpacked, uninsured | Payment: 100% before delivery | Guarantee: No guarantee
Switzerland | Wald
Sawblade size max. 370mm miter cuts Continuously adjustable from 0 ° - 90 ° - 0 ° Saw feed Hyrdal infinitely adjustable Hydraulic vice Subject to prior sale. You can visit the machine gladly and sample saws. Self-collection or forwarding. We are also glad to commission you a cost-efficient forwarding company. You will receive a proper invoice. Indicated company names and trademarks are the property of their owners and are used only for the identification and description of the products. The design and electrical connection of the machine / device must be carried out or checked by an expert trained for this purpose. Deviations from technical data as well as errors in the description of the article can happen and are reserved. Shipping is exclusively for traders - only one pick-up is possible for private consumers.
Switzerland | Neuchâtel
1 gebr. Pipe cutter / tube cutting machine Make GEORG FISCHER / Orbitalum type RA6, New engine with speed control for stainless steel separable pipe dimensions Nominal dimension to 6 "(70-182mm) machine was completely overhauled Open also Bids Notes:. The goods can be picked up or shipping can we be organized. the goods must before loading and pickup are paid. the goods are so sold as it is. This product is a result of the new EU directive excludes any guarantees and warranties sold questions will be Answered!
Switzerland | Niederhelfenschwil
Year of Make: 2013
Switzerland | Höri
Metal cutting saws and band saw sale are used to assemble half-finished metal workpieces. Alternatively to sawing, cutting is an established process for shortening and assembling half-finished pieces. The main difference between the two approaches is how many chippings are produced during the process. Sawing produces a lot of chippings, whereas other separation techniques can be undertaken without producing chippings as a result. The choice of process is the concluding factor as to how precise the cut will be. The chipless cutting of sheet metal allows for a highly precise cut. With thick sheet metal, for example, rolled aluminium, the cutting process can also reform the material. This reduces the precision of the separating process. Shortening blocks, to shape them into the desired form, is a task for a metal cutting saw. Find a wide selection of used metal cutting saws up for sale from various second-hand industrial sellers, different locations at affordable prices. Several different approaches have been developed for metal sawing, which all produce different results in terms of quality, quantity and efficiency. Find used Makita, Stihl, Bosch, Meta box saw tools on our website. Used Band saws, Hacksaws, Circular saws, Hand saws, Metal Cutter etc. Check the second-hand metal saws specifications, manufacturer, prices and more info below. The used online market is full of great offers for a second-hand band saw sale.
A metal cutting saw is made out of a saw blade, whose material has to be harder than the material of the workpiece it will be cutting. Only the tips of the teeth have to be harder, but a diamond coating on the saw blade can enhance the metal saw. Saw blades for metal cutting saws have extremely small teeth. The size of the teeth is due to the hard and tough material that they are made of. Metal can only be separated in small stages. Large teeth would be bend immediately. The saw blade of hacksaw or metal bandsaw and reciprocating saws are in the form of a band. With circular saws they are round. Alternatively to a toothed saw blade, a rotating separator sheet on an angle grinder can also be used.
Metal saws range from simple, manual hacksaws through to powered horizontal or vertical band saws and circular saws. When looking for a metal saw for sale, it's best to give some thought to the exact nature of the jobs you'll want to use it for and tailor your purchase accordingly. Vertical band saws are particularly useful in cutting curving or unusual shapes. Additionally, there are abrasive saws, otherwise known as metal chop saw, which are conveniently light and portable. These items have found a great deal of favour on building sites and smaller workshops as they can perform jobs previously done chiefly by the use of acetylene torches.
Mechanical saws consist of a saw blade, a clamp and a motor. Electric circular saws, bandsaws and hacksaws are stationary machines, which are equipped with their own work table and stop. Thereby, metal cutting saws are set up for a variety of tasks can produce very precise cuts. The preparation of a metal block for further processing on a lathe or milling machine can be undertaken on a stationary saw. Just like all metal cutting machines, electric saws are also equipped with a cooling lubricant. Reciprocating saws are electric hand tools, used to free-handedly separate metal. They are commonly used to recycle automobiles because they can easily be used to cut through the vehicle's beams. Their advantage is that they are free on one side . This means that they can be used for complex materials without any problems. These metal hand saws can be used to process tubes and profiles on-site. Reciprocating saws need to produce very precise cuts. The one-sided open saw blade tends to deflect in a lateral direction, which means that the precision of the cut can only occur within the range of a millimetre.
Various forms of saws designed for cutting metal are available from used industrial equipment auctions.
|BAILEIGH Band Saw Specifications|
|Table Size||24.4" x 22.8"|
|Butt-Welder Capacity (Blade Width)||.74"|
|Slant of Table||10° F/ Rear, 15° L/R|
|Blade Speed||80 – 318 rpm|
|Power||220V / 1-phase|
|Shipping Weight||1,430 lbs.|
|Shipping Dimensions||53" x 37" x 82"|
Metal cutting saws are used to cut metal blocks, profiles, pipes, bars and grooved pieces of sheet metal. These are used to cut intermediary stage products to the extent that they are then ready for further processing. Therefore, metal sawing technology is a very important tool for every metalworking workshop. Precise cuts and the production of complex constructions can be ensured with the implementation of additional applications like guides.
Metal bandsaws have the advantage that they do not heat up. The band creates heat during the sawing process, but this is continually expelled into the surrounding air. A metal band saw is suited for precisely cutting tubes, bars and profiles. Metal band saws only require a short cutting surface and can be set to process specific points.
Automatic hacksaws generally require a cooling agent. They are characterised by their ability to produce very precise cuts and are more suited for long cuts. Hacksaws are particularly suited to cut metal blocks since the saw maintains the same position throughout the cutting process. In most cases, a cooling agent is required to cool the saw blade and the workpiece, and to remove the chippings.
Just like metal cutting saws, circular saws and angle grinders are also used to cut pipes and profiles. Their advantage is that they have very high cutting speeds. They are less suited to cut metal blocks. The height of the saw blade defines the maximum thickness of the block. Metal cutting circular saws often overheat and jam because cooling agents cannot be easily applied.
There are also smaller tools like the metal cutter that can be handled manually that adapt to smaller needs.
Saws are used to prepare intermediary metal workpieces. These workpieces will be further processed at different stations, and so it is highly required that the cut metal workpiece is very precise. However, adjustments are also manageable. Therefore, metal cutting saws can be operated by assistants. A thorough briefing is very important. Clamping in the workpiece correctly, and adjusting the sawing and feed speeds, need to be well understood and practised by the worker. The attention to work safety is very important. Wear eye protection and suitable protective clothing is obligatory. Metal cutting saws are great machines for first learning how to process metal. Just like all cutting machines, these saws create a large amount of dirt and waste. The correct and thorough cleaning and maintenance of these machines needs to be understood by the operator and then reliably undertaken. Normally, this only consists of switching the saw blade. A metal cutting hand saw is constructed in such a way, that this can be very easily undertaken.
However, unskilled assistants should not operate these machines unsupervised. Hacksaws make wide sweeping oscillations and the saw band of a metal bandsaw can suddenly rip. Both are associated with a high risk of injury. All workers need to be briefed on the risks of injury associated with a metal cutting saws before using these machine.
These are very popular in the used metal cutting saws market. If you wish to buy used metal cutting saws it's worth bearing in mind that they can be picked up surprisingly cost effectively at second hand industrial machinery market, thereby saving you the often high cost of buying new equipment and having it undergo a rapid depreciation as soon as it's on your site. Used metal cutting saws for sale are regularly offered at such market band saw sales, and the sheer variety and depth of the available metal saws, as well as the cost savings to be enjoyed, make them well worth checking out.
The second-hand market provides a wide range of used metal saws. Metal cutting saws are characterised by their robustness. This means that they can be used over many decades. This long working life is also due to the low levels of precision at which they operate. Therefore, buying one of these second-hand metal saws is generally a non-risky process. However, it is highly recommended to check its functions, particularly the chuck. This is why one can find many offers of second-hand metal band saws sale.
Reciprocating saws for manual work are available from all established power tool manufacturers. Some saw for sale are coming from the best makers in the world such as BOSCH, METABO, MAKITA, STIHL, FEIN and ELU offer an excellent range of products. Stationary metal band saw sale are available from the companies MÖSSNER, OPTIMUM, EPPLE and SWM.
Recommended suppliers of hacksaws are HOLZMANN, KLÄGER, BEHRINGER and KASTO.
Circular saws for cutting metal are available from the companies GÜDE, EISELE, HÄRBELO, BERG+SCHMIDT and KALTENBACH.