Please rotate your device! (and enjoy the best presentation of our products)

All categories

Homag

— 747
Sort by:
  • Used Homag 1987 For Sale Poland
    • Fixed Price

    Used Homag 1987 For Sale Poland | 1987

    Poland


    Suggest your price. Edgebanding: - Manufacturer: Homag - Year: 1987 - Type: KL 79/02 / Q - Units: pre-heating elements, power adhesive with storage glue, pneumatic pressure zone edge, Crosscut, milling cutter coarse radial scraper (incomplete), cutter zaowalający (defective), Sander x 4 (2 x side, 2 x edge) polisher - Accessories: upper pressure elements - the belt, the additional bearing rail for wide elements - Feed speed: 8-16 m / min - Max work piece height: 70 mm - Length: 14 m - Weight: estimated to 9 t - Visible in the picture return system components not included in the offer

  • Used Homag 1996 For Sale Poland
    • Fixed Price

    Used Homag 1996 For Sale Poland | 1996

    Poland


    Suggest your price. Edgebanding - Manufacturer: Homag - Year: 1996 - Type: KL 79/03 / H - Units: unit with storage tank adhesive glue, pre-heating elements, pneumatic pressure zone edges, crosscut, coarse cutter, cutter radially sets universal vertical / horizontal sander x 2 - Accessories: upper pressure elements - the belt, the additional bearing rail for wide elements - Feed speed: 12-24 m / min - Max work piece height: 65 mm - Length: 13 m - Weight: estimated 8 t

  • Info-mailer for "Homag"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • HOMAG sizing and edge double-sided
    • Fixed Price

    Homag KF26/7/A3/25 | 1997

    Belgium | Kortrijk


    Double-sided machine for formatting the workpiece edge, Kantenanleimen- and postprocessing of different edge materials from the roll to 3 mm edge thickness machine suitable for longitudinal and transverse processing fixed stop side left Rolling block link chain Top pressure with driven wide belt width adjustment via linear guide feed speed 10 - 32 m / min workpiece overhang 30- 80 mm. Workpiece thickness 12 to 40 mm. Working height: 950 mm. Working width double-sided min. 240, max. 2500 mm. Edge material roll from 0.3 to 3 mm, roll diameter up to 900 mm.. Machine equipment left + right: 1 catchment device 3 rolls folded 1 + 1 chain track extension machine II + 1000 mm format part with compact Doppelzerspaner: 1 + 1 milling motor 4,5 kW, 100 Hz 2 + 2 motors 4,5 kW offset above each built on Frässtander 1+ 1 plate purification by gluing nozzles compact A3: 1 + 1 Werkstückkantenvorbeheizung 1 + 1 hot-melt adhesive unit Q34 1 + 1 magazine 6 rollers and roller separator to 3 mm. 1 + 1 print

  • HOMAG Double-sided profiling
    • Fixed Price

    Homag KFL 23/23/02/A/15/S | 2000

    Belgium | Kortrijk


    Fixed side left workpiece width double-sided min / max 270/1500 mm. Panel feed by chain, feed speed 5-20 m / min workpiece overhang 40 mm Workpiece thickness 8-60 mm Features: Links 1 x Compact Doppelzerspanen, 2 motors each 6,6 kW 1 x gesteurte Universal cutter 4.5 kW and 1 outdoor, 1 x gesteurte Universal cutter 4.5 kW 1 x gesteurte Universal milling machine 4.5kW 1 x gesteurte Universal milling machine 4.5kW 1 x gesteurte Universal milling machine 4.5kW 1 x gesteurte Universal milling machine 4.5kW 1 x gesteurte Universal cutter 4.5 kW 1 x edge sanding unit just 1 x Profile sanding unit PS 20, with stepless adjustment and tilt about axis abrasive belt speed 12/6/3 m / s, sanding belt dimensions 3200 x 50/70 mm., 6 professional sanding pad changer, tilt up to 45 ° down right 1 x Compact Doppelzerspanen, 2 motors each 6,6 kW

  • HOMAG Double end, tandem design
    • Fixed Price

    Homag FR12/08:08/15 | 1995

    Belgium | Kortrijk


    2-sided machines in tandem exhibition successively offset fixed: Right, adjustable: Left (There is also the possibility of the two machines side by side set up so that the AB may be changed as desired) feeding synchronized control of the Clamshell Rolling block link chain feed 10-40 m / min Max workpiece overhang: 110 mm workpiece thickness: 8 - 60 mm working height. 950 mm min / max workpiece width: 65/1500 mm min workpiece length: 700 mm 2 x Freq converters 40kVA Gebremzte motors equipment right: 1 x compact Doppelzerspaner, 2 x 6,6 kW, motor shaft for receiving hydro power 1 x Standardfräsaggregat 4.5 kW with scan below 100 Hz 1 x Standardfräsaggregat 4.5 kW with sampling Down selector 50 or 100 Hz 1 x 4,5 kW with Standardfräsaggregat scan the top, 100 Hz 1 x Standardfräsaggregat 4.5 kW with sampling Above, selector 50 or 100 Hz 1 x Standardfräsaggregat 4.5 kW with sampling Above 100 Hz equipment links: 1 x compact Doppelzerspaner, 2 x 6,6 kW, motor shaft for receiving hydro power 1

  • HOMAG Doppelendprofilerstrasse as Winkelanlage

    Machine I retraction device 3 rolls folded hard side right feed 8-40 m / min AB: min 220 mm, max 1500 mm, electronic width adjustment workpiece thickness: 8 - 90 mm, electronic height adjustment facilities per page: Doppelzerspaner, 2 x 4.5 kW universal milling machine, with pneumatic application control, motor 4,5 kW Universal milling machine with pneumatic operational control, motor 4,5 kW interim support at the outlet 1170 mm long input NC 10 90 ° angular transfer to right workpiece thickness 8-40 mm workpiece length min 250 / max 3000 mm workpiece width min 220 / max 1200 mm machine II aligning hard side right Extended chain conveyor, machine II + 1000 mm (max. part size of cams: 1200 mm) feed 8-40 m / min AB: min 220 mm, max 2500 mm, electronic width adjustment workpiece thickness: 8 - 90 mm, electronic height adjustment facilities per page: Doppelzerspaner, 2 x 4,5 kW Universal milling machine with pneumatic operational control, motor 4,5 kW Universal milling machine with pneumat

  • HOMAG Machining center CNC with glue
    • Fixed Price

    Homag BAZ 20/50/16/T | 1995

    Belgium | Kortrijk


    Portal machine with tandem tables, each 2500 x 1600 mm. Max. Workpiece length as a single table: 5000 mm, with 2-way shuttle work. 2250 mm, with 4 double gearing 850 mm. Flat tables Zero: Left Front Equipment: main spindle 12 kW with 30 Specialists derailleur Smelzkleber gluing 360 °

  • HOMAG Flexible edges street in U-formation (Loss Size 1)
    • Fixed Price

    Homag PROFI KR10/16/QA | 2005

    Belgium | Kortrijk


    Edge road consisting of the following elements: - turning station Langs cross PROFI TDR310 / 30/12 - Single-sided edge PROFI KR10 / 16 / QA - Double angular transfer longitudinal and transverse PROFI TWR41 / 30 / L / Q - Single-sided edge PROFI KR10 / 17 / QA - turning station the TL PROFI TDR510 / 30/12 - double angular transfer longitudinal TWR41 / 30/12 / L workpiece thickness: 12-40 mm workpiece dimensions: -.. min 250 mm x 55 mm - Max 3000 mm x 1200 mm equipment PROFI KR10 / 16 / QA - sizing on portal left of machine, 4 kW motor, max 1300 mm - Tiefenschnittsäge on portal left of machine, scoring saw below: 2.2 kW, 6 kW separating engine above - Trennmittelsprühaggregat - Pre-milling 2 x 4 kW - A34 gluing - Magazine A3 12 rollers - pressure zone C with 1-driven and 6 non-driven wheels - workpiece preheating - roughing 2 x 0.55 kW - fine milling 2 x 0.55 kW - form milling FF22 automatically chamfer / radius combination tool - scraper PN10 pneumatic adjustment - finish unit FA11, con

  • HOMAG-sided format processing machine
    • Fixed Price

    Homag PROFI FL 10/14 | 2002

    Belgium | Kortrijk


    Unilateral sizing and glue machine machine to automatically side milling and gluing of a Wasserkehrung in countertops fixed stop side left workpiece support with roller rail, extendable 700 mm noise protection for size part with central suction Rolling block link chain with ball bearings on running and guiding surfaces Magnetic engine braking of the transport chain feed drive frequency controlled, adjusting the speed on the input unit top pressure: with driven composite belt, automatically adjustable via shaft drive with digital readout control NC21 feed infinitely variable 10-40 m / min workpiece overhang max 110 mm workpiece thickness: 8 - 90 mm working height from track top: 950 mm working width min. 85 mm Pneumatic connection: 7 - 8 bar feeder apparatus 3 rolls folded Standardfräsaggregat 6.6 kW, 100 Hz, 6000 Env / min, cross slide, reversing switch rotational direction, exhaust hood, swivel range 180 degrees, tool diameter max 200 mm incl elec. Frequency converter with motor braki

  • HOMAG Edgebander with Pre-milling
    • Fixed Price

    Homag KL 78/A20/S2 | 1999

    Belgium | Kortrijk


    Workpiece thickness: 12 - 60 mm feed: 18 - 24 m / min Tape thickness: 0,4 - 3 mm from the role, from 0.4 to 20 mm for strip Features: Winkeleinführgerät infeed fence with automatic adjustment trimming unit: 2 x 3.0 kW workpiece preheating Anleimaggregat: QA34 / A20 edge magazine printing zone with automatic setting, 1 driven, 6 non-driven pressure rollers End trimming unit: HL83, automatic adjustment chamfer / straight, 2 motors 0,5 kW trimming unit: 2 x 1.5 kW radius trimming, tilting: 2 x 0, controlled 4 kW profile trimming unit FK 13 with 8-station tool changer, 2 x 0,4 kW motors Universal milling unit motor 4kW Profile scraper flat scraper Buffing with oscillation control: HOMATIC NC16

  • HOMAG sizing and edge side
    • Fixed Price

    Homag KAL 210/6/A20/S2 | 2009

    Belgium | Kortrijk


    Fixed side left feed 18 - 25 m / min Workpiece width min. 60 mm at 22 mm thick, 105 mm for panel thickness 40 mm Workpiece overhang 30mm workpiece thickness 8-60 mm instead of 12-40 mm standard (with limitation) edge material roll goods: from 0.3 to 3 mm, strips: 0,4 - 20 mm roll diameter 830 mm Features: trimming unit with 2 motors 3 kW Kantenvorbeheizung edge magazine with 2 wheels, Cutting knife for edges up to 3 mm gluing A20 with Quickmelt melt glue aggregate pressure zone K, 1 driven and 2 Reproduction rolls Kapaggregat HL84, 2 motors 0,8 kW rough trimming, 2 motors each 1 , 5 kW profile trimming unit FK 11, 2 interchangeable heads Profile scraper PN10 flat scraper FA11 Buffing Automatisierungspakket chamfer / straight: -Automatic adjustment infeed fence -Automatic pressure zone adjustment -pneumatic adjustment trimming unit chamfer / straight -pneumatic adjustment contour trimming -pneumatic adjustment profile and flat scraper -Electronic height adjustment

  • HOMAG sizing and edge double-sided
    • Fixed Price

    Homag KF 20/12/QA/30 | 1999

    Belgium | Kortrijk


    Loading table Homag TB 10.25.20 Double-sided machine KF20 / 12 / QA / 30 for formatting the workpiece edge, Kantenanleimen- and postprocessing of different edge materials from the roll to 3 mm edge thickness machine suitable for longitudinal and transverse processing fixed stop side left Rolling block link chain Top pressure with driven wide V-belt width adjustment via linear guide feed speed 10-40 m / min workpiece overhang 40 mm. Workpiece thickness from 8 to 60 mm. Working height: 950 mm. Working width double-sided min. 240, max. 3000 mm. Edge material roll from 0.3 to 3 mm, roll diameter up to 900 mm.. Edge cross section max. in PVC 135 mm2, with veneer 100 mm2 machine equipment left + right: 1 catchment device 3 rolls folded 1 + 1 chain track extension machine II + 1000 mm format part with compact Doppelzerspaner: 1 + 1 free place for scoring 2 + 2 Motors added 4.5 kW superimposed constructed on Frässtander 1 + 1 milling motor 4,5 kW, 100 Hz, reversing switch of rotation, pneumati

  • HOMAG Edgebander
    • Fixed Price

    Homag KL 79/QA | 1990

    Belgium | Kortrijk


    One-page Edge Banding, left-hand version Panel feed by chain top pressure belt with noise protection hoods for all milling and saw motors edges from 0.4 to 20 mm thickness: 10 to 60 mm. Amenities: edge magazine for rolls, 2-layered and stripes Quickmelt gluing pinching caps roughing fine and radius milling fine and radius milling Universal milling with use control form below milling Form milling top Profile scraper Leister hot air blower for Chalking Buffing with oscillation

  • HOMAG panel turning device
    • Fixed Price

    Homag TD 01/30/08 | 1985

    Belgium | Kortrijk


    Disc rotating means for rotating plates of longitudinal to transverse stop: Left rotation device by means of cone top and bottom Max workpiece dimensions:. 3 x 1.3 m. Min Werkstücklängte:. 250 mm, min. Workpiece width: 220 mm. Roll diameter: 64 mm. Feed separately infinitely variable inlet 11-60 m / min, outlet 7 - 40 ms / min Working height: 1050 mm (+/- 50 mm) workpiece weight max. 50 kg.

  • HOMAG feeding equipment
    • Fixed Price

    HOMAG feeding equipment

    Belgium | Kortrijk


    Extras for sizing and edge banding assembly takes place at top pressure Elastic feed rollers are driven and tilted so that the workpiece is fed at once and pressed against the lateral infeed fence device can be folded

  • HOMAG BAZ 20/70/14/2/KA Processing Center
    • Auction: 8 days left

    Homag BAZ 20/70/14/2/KA

    Germany | Rietberg

    9,000 € $ 9,564 £ 7,945

    Electronically controlled milling and edge gluing, Processing and drilling center for the commission- Manufacture of furniture, solid wood or Like materials - Workpiece length max. 4000 mm Min. 500 mm Workpiece width max. 1200 mm Min. 300 mm Workpiece thickness 25/39 mm - Pass from left to right - KA table with stop system - PERFORMANCE PORT FOR B ../70 + 80 / K - STEAM CONVEYORS Belt width 800 mm Center distance of rollers 3075 mm Delivery height max. 1800 mm Inclination angle max. 40 degrees Conveying speed 12 m / min Three-phase motor 550 watt - CONVEYING DEVICE INITIAL B20 - CONVEYING DEVICE OUTLET B20 TO MAIN PIPE - ADDITIONAL ASSEMBLY FOR SECOND MAIN PADS (main spindle distance 1000 mm) - EDGE BANDING UNIT 360 DEGREE FOR MAIN SPINDLE Edge height max. 45 mm Thickness of the cane 0.4 - 3 mm (Material-dependent, for example, PVC min. 1 mm). Veneer 0.4 - 2 mm Edge length min. 230 mm - PRE CUTTING UNIT AND 3-ROLLER AUTOMATIC Complete machine description on further inquiry possible

  • HOMAG Profi KAR 310/12/A20 Edgebander with PU Gluing Unit
    • Fixed Price

    Homag KAR

    Germany | Duisburg


    Technically well-kept and high-end equipped HOMAG Profi KAR 310/12/A20 edge banding machine. The Homag machine was upgradet in 2015 to PU gluing and has an original value of 385,000.00 €! The Homag Profi KAR 310/12/A20 edge banding machine is equipped as follows: - Automatic adjustment infeed fence - Extension infeed 500 mm - Release agent application via spray nozzles top/bottom - Jointing cutter unit with electro-pneumatic control for insert milling - Glue application 2-fold PU and QA - Automatic adjustment pressure zone - Electro-pneumatic adjustment of the snipping motors - Shaping cutter unit FK13 with automatic 8-fold tool changer (2 x 0.4 KW) - Shaping cutter unit FF32 with 4 motors each 0.4 kW - Universal milling unit UF11 electro-pneumatically controlled - Edge grinding unit KS10 with oscillation unit - Chamfer/radius grinding unit PS41 below - Chamfer/radius grinding unit PS41 on top

  • HOMAG Optimat KL 77/A20/S2 Edgebander
    • Auction: 8 days left

    Homag Optimat KL 77/A20/S2

    Germany | Duisburg

    6,500 € $ 6,907 £ 5,738

    2. Glue container front part to change for different size colors (white / black) -profile trimming unit FK13 with 8-fold tool changer including R1, R2 and chamfer cutter - Double extendable workpiece support approx 2500 mm - Several years ago feed chain and feed motor were changed

  • HOMAG Optimat BAZ 322/60/KC CNC Machining Center
    • Fixed Price

    Homag Optimat BAZ 322/60/KC

    Germany | Duisburg


    HOMAG Optimat BAZ 322/60/KC CNC Machining Center with edge glueing unit as 2nd Y-axis and automatically positionable clamping console . Technical data and equipment: - Workpiece length for single workpiece loading max. 6,000 mm - Workpiece length for alternating workpiece loading max. 2,370 mm - Workpiece width fence in front (milling cutter Ø 25 mm) max. 1,525 mm - Workpiece width fence at the back (milling cutter Ø 25 mm) max. 1,700 mm - Workpiece width fence in front (glueing) max. 1,525 mm - Workpiece width fence at the back (glueing) max. 1,650 mm - Workpiece width fence in front (all aggregates) max. 1,525 mm - Workpiece width fence at the back (all aggregates) max. 1,600 mm - Automatically positionable clamping consoles 9 pcs. and vacuum clamping system - Main spindle with 14.5 KW and speed 0 - 18,000 rpm - Spindle retraction stroke - Glueing unit as 2nd Y-axis 360° glueing with impact - Pre-snipping station with 6-fold roller magazine - Edge height max. 65 mm and edge thickness

  • HOMAG Profi KAL 330/9/A20 Edgebander with Workpiece Thickness 80 mm
    • Fixed Price

    Homag Profi KAL 330/9/A20

    Germany | Harsewinkel


    High-end equipped, technically well maintained HOMAG Profi KAL 330/9/A20 Edgebander with workpiece thickness max. 80 mm and touch-screen control monitor Technical data and equipment: - Sliding stop for manual parts feeder - Extension infeed 500 mm - Collection device with 2 rollers - automatic adjustment infeed lineal and pressure zone - PU egde glue - profile trimming unit FK13 with automatic 8-fold tool changer - Universal trimming unit UF11 control and motor 4,0 KW

  • HOMAG PROFI BMG511/40/12/M/K CNC Machining Center for Windows
    • Fixed Price

    Homag PROFI BMG511/40/12/M/K

    Germany | Duisburg


    Very well equipped and well maintained HOMAG PROFI BMG511/40/12/M/K CNC Machining Center in gantry-construction with Flex 5+ Interface and automatically positionable consoles. technical data and further equipment: - Workpiece length for single workpiece loading max. 4,000 mm - Workpiece length for alternating workpiece loading max. 2,250 mm - Workpiece width (milling cutter Ø 25 mm) max. 1,550 mm - Workpiece width (all aggregates) max. 1,100 mm - Workpiece thickness max. 300 mm incl. clamping equpiment - 1 tool changer 14-fold - 1 tool changer 30-fold - main spindle 18,5 kW for HSK F63 tools with Flex 5+ interface - 4 horizontal drilling spindles with saw, 0/90° swiveable - automatical positioning of consoles "Quick Move" in x- direction - reinforced consoles for Window Clamping Systems - LED Positioning for Suction Cups - Laser Projection for positioning of suction cups with HeNe-Laser - Window Clamping Set - chip conveyor belt - operators terminal with Full-HD Multitouch Display - IP

  • HOMAG Optimat BMG 511/60/12/F/K CNC Machining Center with 5-Axis Spindle
    • Fixed Price

    Homag BMG

    Germany | Harsewinkel


    High-end equipped, technically well maintained HOMAG Optimat BMG 511/60/12/F/K CNC Machining Center with gimballed 5-axis main spindle and performance pack for DRIVE5C+. Technical data and equipment: - Workpiece length for single workpiece loading (all aggregates) max. 6,000 mm - Workpiece length for alternating workpiece loading (all aggregates) max. 2,375 mm - Workpiece length for single workpiece loading (milling cutter Ø 25 mm) max. 6,175 mm - Workpiece length for alternating workpiece loading (milling cutter Ø 25 mm) max. 2,375 mm - Workpiece width in front (milling cutter Ø 25 mm) max. 1,325 mm - Workpiece width at the back (milling cutter Ø 25 mm) max. 1,550 mm - Workpiece width in front (all aggregates) max. 1,100 mm - Workpiece width at the back (all aggregates) max. 1,100 mm -Main spindle 5-axis with 12 kW motor DRIVE5C+ Gimballed 5-axis head for milling, drilling and sawing with any desired angle for workpiece - Speed regulation 1,000 - 24,000 rpm - Rotation angle in the C-a

  • HOMAG KFR 10/19/QE/S Edgebander
    • Fixed Price

    Homag KFR 10/19/QE/S

    Germany | Wermelskirchen


    equipped with the following units for processing moulded parts: - contour milling unit CF11, 6 kW, depth of contour max. 150 mm - 2 pcs. contour and corner milling units, 4 kW, depth of contour max. 110 mm - rough trimming unit for moulded parts, 2 x 0,7 kW - rough trimming unit for radius milling, 2 x 0,6 kW - chamfering unit top and bottom, 2 x 0,25 kW With material return WAMHOFF, with turning station

  • CNC EDGEBANDER

    Homag KL 75/A3 edgeban, 2.36" wkpc thkns, .12" A3 thkns cap, 59-80 FPM, , Homatic NC21, 2000 Homag KL 75/A3 edgeban, 2.36" wkpc thkns, .12" A3 thkns cap, 59-80 FPM, , Homatic NC21, 2000 . . Specifications will be available shortly. Specifications will be available shortly. . .

Info-mailer for "Homag"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.

Sales format

Rate this manufacturer!

4.7 (3)
Thank you!
You have already rated.
Rating is not available. Try again later.