- Fixed Price
On original table with cabinet and original motor|With lots of accessories like|Tailstock and lever tailstock|Screw operated carriage and lever operated carriage|3-Jaw chuck, 6jaw chuck with innerjaws and 6-jaw chuck with outer|Collets and colletcloser|Quick change toolpost Tripan with inserts|BL 316763|In very good condition
United States | Miami
USED "KINGSTON" GEAR HEAD GAP TYPE ENGINE LATHE MODEL HL-1500 SERIAL NUMBER 08690924 AGE OF MANUF. 1981 CAPACITY 21" x 60" SWING OVER THE GAP 28-1/2" LENGTH OF THE GAP 7" SWING OVER THE BED 21" SWING OVER THE CARRIAGE 13-1/8" DISTANCE BETWEEN CENTERS 60" SPEEDS (12) 25 TO 1,500 R.P.M. SPINDLE HOLE 3-1/8" SPINDLE NOSE D1-8 INCH/ METRIC/ DIAMETRAL/ MODULAR TAILSTOCK TAPER # 4 MT TAILSTOCK BARREL TRAVEL 6" QUILL DIAMETER 2-9/16" MOTOR 10 HP/220-440/3/60 WEIGHT 5,750 LBS. (APPROX.) EQUIPPED WITH: NEW 3 JAW CHUCK, COOLANT PUMP, QUICK CHANGE TOOL POST, STEADY REST, 4 WAY CARRIAGE STOP, FOOT BRAKE, CHIP PAN, THREADING DIAL, MICROMETER CARRIAGE STOP & MISC.
Info-mailer for "Lathes"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Germany | Günzburg
Year of Make: 2001
Year of Make: 1980
STOCK# TK-20619|S/N 2/0021/01795|NEW 1980|CAPACITIES|SWING OVER BED:11″|SWING OVER CROSS SLIDE:7″|DISTANCE BETWEEN CENTERS:30″|SPINDLE|BORED TO PASS:1.375”|NOSE:D1-3|MORSE TAPER IN NOSE BUSH:3|SPEEDS (16):30 – 720 RPM (LOW), 85 – 2,000 RPM (HIGH)|LEADSCREW|DIAMETER:.98”|THREAD:4 TPI|THREADS & FEEDS|US STANDARD THREADS (32):3.5 – 80 TPI|FEEDS (13):.001 – .032 IPR|BED|WIDTH OVER WAYS:7.5”|DEPTH UNDER HEADSTOCK:9”|CROSS SLIDE|WIDTH:5.1”|TRAVEL:6.5”|TOP SLIDE|WIDTH:3”|TRAVEL:3.6”|TAILSTOCK|QUILL DIAMETER:1.5”|TRAVEL:3.7”|GENERAL|WEIGHT:1,010 LBS|DIMENSIONS:74″ LR X 24″ FB|ELECTRICS:220/440 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|8” 4-JAW CHUCK|2-WAY TOOL POST|BED TURRET|JACOBS DRILL CHUCKS|CHUCK GUARD|THREAD CHASING DIAL|PRICE $ 5,450.00
Italy | Montichiari
Switzerland | Bottighofen
Year of Make: 1995
Year of Make: 2013
STOCK# TK-20672IP|NEW 2013|SWING DIAMETER|OVER FRONT APRON:34.5″|OVER CROSS SLIDE:25.5″|CAPACITIES|CHUCK SIZE:15″|MAXIMUM CUTTING DIAMETER:25.5″|MAXIMUM CUTTING LENGTH:44″|BAR CAPACITY:4″|TRAVELS & FEEDRATES|X-AXIS:17″|Z-AXIS:44″|MAXIMUM THRUST (X):5,500 LBS|MAXIMUM THRUST (Z):9,000 LBS|RAPIDS (X & Z):710 IPM|SPINDLE|MAXIMUM RATING:40 HP|MAXIMUM SPEED:2,400 RPM|TORQUE:1,400 FT-LB @ 150 RPM|SPINDLE NOSE:A2-8|SPINDLE BORE:4.62″|TURRET|NUMBER OF TOOLS:12|MISCELLANEOUS|COOLANT:95 GALLONS|AIR REQUIREMENT:4 SCFM @ 100 PSI|ELECTRICS:260 VOLTS, 3 PH, 60 CYC, 80 AMP|EQUIPPED WITH|15″ 3-JAW HYDRAULIC CHUCK|PROGRAMMABLE TAILSTOCK|CHIP CONVEYOR|300 PSI HIGH PRESSURE COOLANT|PRICE $ 79,500.00|THIS MACHINE IS ON CONSIGNMENT ANY OFFER IS WELCOME BUT SUBJECT TO CONSIGNEE’S APPROVAL.|SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A CUSTOMER, IT IS BEING SOLD “AS IS”.|MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.|ALL SPECIFICATIONS MUST BE VER
Year of Make: 2004
STOCK# HB-20713IP|NEW 2004|SWING DIAMETER|OVER FRONT APRON:30″|OVER CROSS SLIDE:14.5″|CAPACITIES|CHUCK SIZE:12″|STANDARD BAR CAPACITY:3″|BETWEEN CENTERS:39”|MAXIMUM CUTTING DIAMETER:17”|MAXIMUM CUTTING LENGTH:34″|MAXIMUM CUTTING LENGTH W/ STANDARD WORK HOLDING:32″|SPINDLE|MAXIMUM SPEED:2,400 RPM|PEAK HORSEPOWER:40 HP|SPINDLE NOSE:A2-6|SPINDLE BORE:4.62″|DRAW TUBE BORE:4.00″|TRAVELS & FEEDRATES|X-AXIS:11.30″|Z-AXIS:34″|X-AXIS MOTOR MAX THRUST:3,400 LBS|Z-AXIS MOTOR MAX THRUST:5,400 LBS|RAPIDS:710 IPM|TURRET|NUMBER OF TOOLS:12|OD VS ID TOOLS:ANY COMBINATION|TOOL SIZE (OD TURNING):1″|BORING BAR REAR CLEARANCE:4.50″|INDEX TIME (ONE TOOL):1 SECOND|GENERAL|WEIGHT, APPROX.:16,000 LBS|POWER REQUIREMENT:28 KVA|COOLANT:50 GALLONS|AIR REQUIREMENT:3 SCFM @ 100 PSI|ELECTRICS:220 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|HAAS CONTROL|15” CHUCK|BIG BORE|TAILSTOCK|TOOL PRESETTER|STEADY REST|LIVE TOOLING|FULL C-AXIS|(4) LIVE TOOL HOLDERS – (2) RADIAL & (2) AXIL|MISCELANOUS STATIC TOOL HOLDERS|PRICE $ 39,500.00
Germany | Stockstadt am Rhein
Year of Make: 2015
turning diameter over bed 560 mm turning diameter over slide rest 350 mm turning length 1880 mm turning dia. in gap 780 mm center height over bed 250 mm bed width 394 mm spindle taper D1-8 spindle bore 105 mm spindle turning speed range 26-1700 U/min transmission ratio 16 Stck. metrical thread cutting 0.35-80 mm/U workpiece length - max. 2000 mm tailstock quill diameter 75 mm longitudinal feed 0,044-1,48 mm/U cross feed 0,022-0,74 mm/U range of module thread 0,2-40 mm range of dimetrical thread 7/8-160 DP power requirement 7,5 kW weight of the machine ca. 2360 kg 3 jaw chuck Ø 250 mm 4-jaw independent chuck 400 mm fixed steady 30-200 mm fixed steady optional 152-305 mm follower rest 10-100 mm follower rest optional 76-216 mm coolant system foot brake oil gun working lamp handwheel on the left tool post holder Multifix Größe C mit 4 Haltern chuck cover 3-Axis DRO SINO center sleeve bed stop mit elektrischem Endschalter Electrics from Schneider or Siemens clutch electromagnetic drive pla
STOCK# HB-20229|S/N DDB101NKG|SWING:10”|CENTER DISTANCE:30”|NUMBER SPINDLE SPEEDS WITH BACK GEAR:6|SPINDLE HOLE:3/4”|NUMBER OF FEEDS AND THREADS:48|GENERAL|DIMENSIONS:63” LR X 30” FB X 64” H|ELECTRICS:220 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|5” 3-JAW CHUCK|TAILSTOCK|TURRET TOOL POST|DRILL CHUCK|PRICE $ 2,250.00
Year of Make: 1972
STOCK# TK-20302|S/N HLV-H-3762|NEW 1972|SWING OVER BED:11″|SWING OVER CARRIAGE:9″|SWING OVER CROSS SLIDE:6″|DISTANCE BETWEEN CENTERS:18″|SPINDLE NOSE:5C HARDINGE TAPER NOSE|VARIABLE SPINDLE SPEEDS:125 TO 3000 RPM|HOLE THROUGH SPINDLE:1-1/4″|CARRIAGE POWER FEED RANGE:5/16 TO 7 IPM|CROSSLIDE POWER FEED RANGE:3/16 TO 4 IPM|ENGLISH THREADS (36):11 TO 108 TPI|SPINDLE CAPACITY|WITH ROUND 5C COLLETS:1-1/16″|WITH HEXAGON 5C COLLETS:7/8″|WITH SQUARE 5C COLLETS:3/4″|WITH STEP CHUCKS:6″|WITH JAW CHUCKS:5″|WITH EXPANDING COLLETS:3″|GENERAL|DIMENSIONS:72” LR X 29” FB X 62” H|MACHINE WEIGHT:1,800 LBS|ELECTRICS:220 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|5C COLLET CLOSER|6” 3-JAW CHUCK|2-WAY QUICK CHANGE TOOLPOST WITH HOLDERS|HARDINGE MODEL A 4-SIDED TOOLPOST|TRAV-A-DIAL|JACOBS DRILL CHUCK|LIVE CENTER|CHANGE GEARS|PRICE $14,950.00
Year of Make: 2004
STOCK# HB-20714IP|NEW 2004|16,080 SPINDLE ON HOURS|SWING DIAMETER|OVER FRONT APRON:30″|OVER CROSS SLIDE:14.5″|CAPACITIES|CHUCK SIZE:12″|STANDARD BAR CAPACITY:3″|BETWEEN CENTERS:39”|MAXIMUM CUTTING DIAMETER:17”|MAXIMUM CUTTING LENGTH:34″|MAXIMUM CUTTING LENGTH W/STANDARD WORK HOLDING:32″|SPINDLE|MAXIMUM SPEED:3,400 RPM|TORQUE W/ OPTIONAL TRANSMISSION:850 FT/LB @ 250 RPM|PEAK HORSEPOWER:30 HP|SPINDLE NOSE:A2-6|SPINDLE BORE:3.50″|DRAW TUBE BORE:3.03″|TRAVELS & FEEDRATES|X-AXIS:11.30″|Z-AXIS:34″|X-AXIS MOTOR MAX THRUST:3,400 LBS|Z-AXIS MOTOR MAX THRUST:5,400 LBS|RAPIDS:710 IPM|TURRET|NUMBER OF TOOLS:12|OD VS ID TOOLS:ANY COMBINATION|TOOL SIZE (OD TURNING):1″|BORING BAR REAR CLEARANCE:4.50″|INDEX TIME (ONE TOOL):1 SECOND|GENERAL|WEIGHT, APPROX.:16,000 LBS|POWER REQUIREMENT:28 KVA|COOLANT:50 GALLONS|AIR REQUIREMENT:3 SCFM @ 100 PSI|ELECTRICS:220 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|HAAS CONTROL|12” 3-JAW CHUCK|BOLT-ON STYLE TURRET|CHIP AUGER|PRICE $ 27,500.00|THIS MACHINE IS ON CONSIGNMENT ANY
Germany | Lüdenscheid
Year of Make: 1955
Rotation diameter over guides 720 mm turning diameter over machine bed 920 mm turning length 1,200 mm machining length 1,000 mm main spindle speed range - main spindle 17 - 560 min / -1 drive power - main spindle - kW 7.4 gear stages 18 spindle bore 69 mm New Roehm faceplates diameter 500 mm four-jaw chuck diameter 320 mm Machine weight approx. 3000 kg Space requirement approx. 3.5 x 1.5 x 1.5 m Tailstock MK 5 3 pieces Multifix steel holder Lynette fixed Koernerspitze original spare wheel set 5-way length stop electrics partly renewed 3 new V-belts - tested, under power and for demonstration
United States | Miami
NEW "BIRMINGHAM" GEAR HEAD GAP TYPE ENGINE LATHE MODEL YCL-1340 SWING OVER THE BED 13" (330mm) SWING OVER CARRIAGE 8" (200mm) SWING OVER THE GAP 18-3/4" (476mm) LENGTH OF THE GAP 7-7/8" (200mm) DISTANCE BETWEEN CENTERS 40" (1015mm) SPINDLE HOLE 1-3/8" (35mm) SPEEDS (8) FROM 70 TO 2,000 R.P.M. INCH AND / METRIC D1-4 CAMLOCK SPIDLE METRIC THREADING (40) 0.2mm TO 6mm INCHES (40) 4 TO 112 TPI TAILSTOCK TAPER #3 MT TAILSTOCK BARREL TRAVEL 3-3/4" (95mm) MOTOR 2 HP/220/1/60 EQUIPPED WITH: 3 & 4 JAW CHUCK, 4 WAY SQUARE TOOL POST, STEADY REST, FOLLOW REST, FACE PLATE, THREADING DIAL, CHIP PAN, SPLASH GUARD, FLOOR STAND, TOOL BOX, CHANGE GEARS FOR THREADING & MISC. WEIGHT: 1,200 lbs. (APPROX.)
United States | Atlantic City
Year of Make: 1988
OKUMA LB-15 CNC Turning Center\n\n-- OSP-5020L-G CNC Control\n\n-- Spindle Speed: 75 - 4,200 RPM\n\n-- Spindle Motor: 14.5HP\n\n-- X Axis: 6.89""\n\n-- Z Axis: 20.47""\n\n-- Swing over Saddle: 15.75""\n\n-- Bar capacity 1.98""\n\n-- Rapid traverse 472 IPM\n\n-- 12 Position Turrett\n\n-- Tailstock\n\n-- 6"" Chuck\n\n-- Collet Chuck\n\n-- Chip Conveyor\n\n-- Dimensions: 107"" x 73"" x 69""\n\n-- Weight: 9900 lbs
Germany | Nürtingen
Year of Make: 1973
- Max Diameter Bar Capacity :2,75”| - Max Swing over bed : 20,8” | - Max swing over slide : 15,35”| - Max turning Diameter : 12,2”| - Max Machining Length : 37,63”| - Distance between centers : 39,37 “| - Spindle Power : 30 / 26 HP | - Spindle Speed : 33 - 3300 RPM | - Spindle Bore : 80 mm| - Spindle Nose : A2-8| - Turret : 1| - Tools : 8 stations| - Turret Index (single step) : 2,5 seconds| - X Axis Travel : 7,9”| - Z Axis Travel : 40,1”| - Rapid Travers Rates : X = 787 IPM - Z = 984 IPM| - Tailstock Taper : MT#5| - Machine Dimensions : 127,4” x 76,77” x H72,64”| - Machine Weight : 12300 Ibs| Equipped with : | - MAZATROL T-PLUS CNC Control| - 1 Probe lever arm of Tools| - 1 Chuck 3 Jaws ∅ 250 mm
India | Mumbai
Year of Make: 2003
Year of Make: 2007
STOCK# HB-20685IP|NEW 2007|MAXIMUM MACHINING DIAMETER:.79″|MAXIMUM MACHINING LENGTH:6.50″ PER CHUCKING|MAXIMUM TAKING OUT LENGTH OF PRODUCT:3.15”|MAXIMUM FRONT DRILLING DIAMETER:.39”|MAXIMUM FRONT TAPPING DIAMETER (TAP & DIE):M8 (TAP) & M6 (DIE)|SPINDLE THROUGH HOLE DIAMETER:1.22”|MAXIMUM MAIN SPINDLE SPEED:8,000 RPM|SPINDLE SPEED CHANGE STEPS:STEPLESS|SPINDLE INDEXING:15 DEGREE|SPINDLE C-AXIS:0.001 DEGREE|MAXIMUM CHUCK DIAMETER OF THE BACK SPINDLE:.79”|MAXIMUM EXTERNAL WORK PIECE LENGTH OF BACK SPINDLE:67”|MAXIMUM DRILLING DIAMETER IN THE BACK MACHINING PROCESS:.31”|MAXIMUM TAPPING DIAMETER IN THE BACK MACHINING PROCESS:M6|MAXIMUM BACK SPINDLE SPEED:8,000 RPM|BACK SPINDLE SPEED CHANGE STEPS:STEPLESS|BACK SPINDLE C-AXIS:0.001 DEGREE|ROTARY TOOL SPINDLE FOR CROSS MACHINING|MAXIMUM DRILLING DIAMETER:.28”|MAXIMUM TAPPING DIAMETER:M6|MAXIMUM SPINDLE SPEED:8,000 RPM|SPINDLE SPEED CHANGE STEPS:STEPLESS|NUMBER OF TOOLS TO BE MOUNTED|TURNING TOOLS ON THE GANG TOOL POST:7|ROTARY TOOLS FOR CROSS
United States | Belvidere
Year of Make: 2004
Italy | Limena
Click to enlarge Code: AAOW867 Brand: Omg Zanoletti Make / make Omg Zanoletti Model / type T.P. 350 x 2000 Number / serial number 3256 Spindle bore 125 mm Weight / weight 4400 kg Volt 380/50 Hz Installed power / installed power 16 kw Year / year 1998 CE Download data sheet: PDF file Privacy info Selling price: Register to see Available prices or fill out the form below to get information on this equipment and a quotation.
Year of Make: 2003
HAAS SL30T CNC TURNING CENTER W/HAAS 300 BAR FEEDER MFG:2003 SWING OVER FRONT APRON....................... 30" SWING OVER CROSS SLIDE....................... 14.5" CHUCK SIZE................................... 10" STANDARD BORE / BAR CAPACITY................. 3.5"/ 3" DISTANCE BETWEEN CENTERS..................... 39" MAXIMUM CUTTING DIAMETER X LENGTH............ 17" X 34" SPINDLE MOTOR................................ 20 HP SPINDLE NOSE................................. A2-6 TURRET....................................... 12 POS RAPID TRAVERSE............................... 710 IPM MACHINE WEIGHT............................... 16,000 LBS APPROX. DIMS W/ CHIP CONVEYOR................ 162"x77"x74"
Year of Make: 2000
STOCK# TK-20600#|S/N R2FV01-R2AN3951|NEW 2000|WORKING AREA|SWING OVER BED:16.9″|SWING OVER CROSS SLIDE:8.3″|DISTANCE BETWEEN CENTERS:20.1”|BAR CAPACITY:1.75”|X-AXIS TRAVEL:6.3”|Z-AXIS TRAVEL:12.2”/20.1”|HEADSTOCK|SPEED RANGE:0 – 6,000 RPM|TORQUE OF MAIN SPINDLE:58 FT/LBS|SPINDLE NOSE:A2-5|SPINDLE BORE:2.1”|MOTOR:15 HP|TOOLING SYSTEM|TURRET:8 STATIONS|TOOL HOLDERS:VDI-30|TAILSTOCK|TAPER:MT #4|GENERAL|DIMENSIONS:105” LR X 72” FB X 83” H|WEIGHT (APPROXIMATELY):5,700 LBS|ELECTRICS:230 VOLTS, 3 PH, 60 CYC|EQUIPPED WITH|FANUC 21iT CONTROL|ATS 16C COLLET CHUCK|PRICE $ 22,500.00|THIS MACHINE IS ON CONSIGNMENT ANY OFFER IS WELCOME BUT SUBJECT TO CONSIGNEE’S APPROVAL.|SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A LESSOR AND IS AN OFF-LEASED MACHINE IT IS BEING SOLD “AS IS”.|MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.|THERE WILL BE AN ADDITIONAL $1,000 CHARGE FOR MACHINE PREPARATION AND LOADING.|ALL SPECIFICATIONS MUST BE VERIFIED
Year of Make: 1990
STOCK# TK-20667|S/N D7904-172R|NEW 1990|CAPACITIES|SWING OVER BED:13″|SWING OVER CROSS SLIDE:7-25/32”|SWING THROUGH GAP:18-3/4”|LENGTH OF GAP:4-1/2”|CENTER|HEIGHT:6-1/2”|ADMITS BETWEEN:39”|BED|WIDTH:7-3/8”|LENGTH:65-1/8”|HEIGHT:11-13/32”|MOTOR|MAIN SPINDLE:3 HP|HEADSTOCK|SPINDLE BORE:1-1/2”|NOSE:D1-4”|SPINDLE TAPER(WITH SLEEVE):MT-5 (MT-3)|SPEEDS|NUMBER:8|RANGE:70-2,000 RPM|CARRIAGE & COMPOUND|CROSS SLIDE TRAVEL:6-5/16”|COMPOUND REST TRAVEL:2-11/16”|LEAD SCREW DIAMETER:7/8”|THREADS|IMPERIAL PITCHES (36):8 – 112 TPI|METRIC PITCHES (28):0.2 – 5 mm|DIAMETRICAL PITCHES (36):8 – 112 DP|MODULE PITCHES (22):0.2 – 3 MP|FEEDS|LONGITUDINAL FEEDS, IMPERIAL (36):.0019 – .0273 IPT|LONGITUDINAL FEEDS, METRIC (36):.050 – .69 MM/REV|CROSS FEEDS, IMPERIAL (36):.0006 – .0094 IPR|CROSS FEEDS, METRIC (36):.013 – .188 MM/REV|TAILSTOCK|QUILL DIAMETER:1-21/32”|TRAVEL:4-1/2”|TAPER:MT-3|GENERAL|OVERALL DIMENSIONS:73-3/4” LR X 29-1/2” FB X 46-3/4” H|Net Weight:2,081 LBS|ELECTRICS:220 VOLTS, 3 PH, 60 CYC|EQUIPPE
Year of Make: 1983
STOCK# HB-20308|S/N HLVH-10917T|NEW 1983|SWING OVER BED:11″|SWING OVER CARRIAGE EDGE:9″|SWING OVER CROSS SLIDE:6-1/2″|DISTANCE BETWEEN CENTERS:18″|SPINDLE MOUNT:HARDINGE TAPER WITH 5-C COLLET INTERNAL TAPER|VARIABLE SPINDLE SPEEDS:125 TO 3000 RPM|SPINDLE THRU HOLE DIAMETER:1-1/4″|COLLET CAPACITY IN ROUND STOCK:1-1/16″|VARIABLE FEED RATES, LONGITUDINAL:5/16 TO 7 IPM|VARIABLE FEED RATES, CROSS FEED:3/16 TO 4 IPM|METRIC THREADS (27):.3 – 2.5|GENERAL|OVERALL DIMENSIONS, APPROX:72″ LR X 29″ FB X 62″ H|WEIGHT, APPROX:1,800 LBS|EQUIPPED WITH|LEVER TYPE COLLET CLOSER|5” 3-JAW CHUCK|5” 4-JAW CHUCK|4-WAY TURRET TOOL POST|ENGLISH CHANGE GEARS|MISCELLANEOUS 5C COLLETS|COOLANT|PRICE .$ 17,500.00
Germany | Reichshof
Specifications Okuma LT 200 MY CNC Turning and Milling M Control: OSP E 100 L Year: 2005 under power: [h]: 51 012 Spindle running time: [h]: 17.103 TECHNICAL DATA: Max turning length:. [Mm] 700 Diameter [mm .] 210 Max swing diameter over bed: [mm] 400 speed range: [1 / min] 6000 spindle bore:. [mm] 62 3wdehqyua drive power [kW] 11 counter spindle yes tool turret 2 x 12 positions driven Werkz. 2 x 12 positions speed range: [1 / min.] 6000 C-axis 2 x 0.001 degrees Y-axis 120 mm (+50 / - 70) Machine weight [kg] 7000 footprint (LxWxH): [m] 2660 x 2000 1980 Accessories: Kuzstangenlademagazin Samsys 3000 hydraulic chuck Kitagawa chip conveyor parts catcher with box extensive tool package The machine has been revised by us and wear have been replaced - new security disc - new M- drives - partly neulackiert
United States | Miami
USED "LeBLOND REGAL" GEAR HEAD ENGINE LATHE MODEL 19 SERIAL NUMBER 2D517 CAPACITY 19" x 54" SWING OVER THE BED 19-1/4" SWING OVER THE CARRIAGE 12-1/4" DISTANCE BETWEEN CENTERS 54" SPINDLE NOSE L1 SPEEDS (12) 25 TO 1,000 R.P.M. SPINDLE HOLE 1-1/2" THREADING (48) 2 TO 112 T.P.I. TAILSTOCK: TAPER MORSE #4 TAILSTOCK DIAMETER 2-7/16" QUILL TRAVEL 6" MOTOR 7.5 HP/220-440/3/60 WEIGHT 4,500 LBS. (APPROX.) EQUIPPED WITH: 15" 4 JAW CHUCK, QUICK CHANGE TOOL POST, CHIP TRAY, STEADY REST, COOLANT PUMP, THREADING DIAL, CARRIAGE MICRO STOP & MISC
United States | Midwest
Year of Make: 1997
OKUMA IMPACT LU-15M 5-AXIS Twin-Turret CNC Turning CenterSpecifications:\n\n-- Swing over bed 20.87"".\n\n-- Swing over carriage 14.96"".\n\n-- Swing over cross slide12.99"".\n\n-- Maximum turning diameter 10.62"".\n\n-- Maximum turning length 23.62"".\n\n-- X-Axis travel (upper/lower) 10.24""/5.51"".\n\n-- Z-Axis Travel (upper/lower) 25.20""/24.21"".\n\n-- Headstock & main spindle nose Jis-A2-8.\n\n-- Spindle bore diameter 3.15"".\n\n-- Spindle speed range to 4500 Rpm.\n\n-- X-Axis rapid traverse speed 590 ipm.\n\n-- Z-Axis rapid traverse speed 787 ipm.\n\n-- X-Axis cut feed rates (ipr) 0.0001""- 40000.\n\n-- Z-Axis cut feed rates (ipr)0.0001""- 40000.\n\n-- Motor 29.5 HP.\n\n-- Floor space 156"" x 83"" x76"".\n\n-- Weight approximately12000 Lbs.Equipped with:\n\n-- 8"" 3-Jaw chuck.\n\n-- Okuma Osp7000l CNC control.\n\n-- Live milling capabilities.\n\n-- 12 Position upper & 8 position lower turret.\n\n-- Chip conveyor - coolant tank.\n\n-- Tailstock.
Germany | Malsch
Year of Make: 1986
Upper/lower turrets with 12 driven stations each - sub spindle - Y axis on upper turret - no.2 C axis. Bar capacity 80 mm - Max turning length 380 mm - Spindles speed 3200/5000 Rpm - Motors power 22-26/7.5-11 kW - Power/speed driven tools 1.1-3.7 kW / 4000 Rpm Dimensions included chip conveyor: 380x200x220h cm - Machine weight kg. 6500
WEILER L + Z Turning Machine Digital display: HEIDENHAIN 3-Axis digital display Technical data: Turning diameter over bed 330 mm Turning diameter over support 180 mm Spindle bore 40 mm Turning length 750 mm Speed range 22-2800 U / Min: Drive capacity: 5.5 KW | Machine weight approx .: 1130 kg | Accessories: three-pack rotary chuck 160 mm, chip pan + spike protection, Multfix Gr. B with 4 inserts, halogen light, coolant device, fixed and running tip
Since lathes are most important and standard precision cutting machines, choosing used lathes by checking on the quality standards from the below list of machines will be a challenging task. We made it more simple and easy to choose, metal turning lathe from the best manufacturers and various sellers aggregated here in one place. With clear specs details, prices and sale end date if it is an industrial auction. You can find the best used lathes for sale right here at this vast and broad selection from the online used market!
The lathe is the standard metalworking machine used today to produce rotationally symmetric metal workpiece though precise, cutting production processes. There is a wide range of rotational components that can be produced on a lathe machine. This includes components from simple, cylindrical shafts, circular and spherical formed components, to complex structures like gear theeth. Additional devices are required on a lathe when producing uneven forms. Today, universal metal lathes allow for the maximum turning of a workpiece.
On a lathe, the workpiece is clamped in between the lathe spindle and the tailstock. There are advantageous pre-products that already have an approximated level of roundness. Angular or irregularly formed products, like special profiles, tend to have imbalances. These imbalances can lead to imprecise processing or damages to the metal lathe machine. Ideal pre-products that are processed on metal lathes include continuously cast round bars made out of solid material, or round pipes with thick walls. Long workpieces are additionally held up via supports. Once the workpiece is clamped in and spun into rotation, it is guided to the cutting tool via a tool carriage. The chippings are continuously removed by its adjustable feed. The carriage can traversely or longitudinally move towards the rotional axis of the workpiece.
The basic requirement of a metal turning lathe is that it needs to stand solidly. This is why it has a cast iron frame. Large lathes and lathe centers need an additional cement foundation. This absorbs the natural oscillations of the machine lathe as well as external vibrations that occur in close promiximity to the machine. The precision of turned components that are produced within a hundreth of a milimeter is directly impacted by these distributing vibrations. An electric motor and a gear box are used to power the lathe's spindle. The rotation speed and the turning of the spindle needs to be adjustable. The more of the lathe's parameters that can be adjusted, the more comprehensive the processing of a component can be. Spindles, supports, carriages and tailstocks are integrated into a monolithic grey cast iron cover. This needs to be particularly good quality, massive and precisely constructed. The disadvantage of a cast component is that it cannot be welded. Bangs, cracks or other damages to the body usually means that the whole machine has to be thrown away. Therefore, metal lathes should be installed in a certain place and then not moved again. Useful accessories for a machine lathe include lighting and an extraction system. Lathes metal also contain CNC control and a cover. Instead of a tailstock, large high-end lathes have two powered spindles. Complete lathe machining centres also having a tool changer. The most common tasks undertaken on a lathe are straight turning, face turning, drilling, reboring and the production of internal and external threads.
Depending on the turning axis, lathes are available either in a vertical or horizontal construction. Vertical lathes are used for processing components with a large cross section; the components are vertically clamped in and turned. They are usually available without an additional chuck. One of the most common types is the horizontal lathe. These are generally called universal lathes. The universal lathe is usually used for training purposes. There is an enormous range of metal lathe machines for sale, available in all sizes. The small metal lathes are used for DIY purposes or by watchmakers. The largest lathes can take up an entire industrial hall. The most commonly used lathes are the mid-sized universal lathes, CNC lathes and automatic lathes.
Workers who want to operate a lathe require a certain level of qualification before they can be authorised to do so. Beginner courses cost over 1,000 Euros at vocational training institutes. This is the recommended basic requirement for freely operating a lathe center. Ideally, lathes are operated by trained cutting machine operators. In addition to training, a high level of experience is also required. Therefore, trained turners (like welding machines) can constantly increase their qualifications with additional certificates. Laymen and unskilled workers would not be able to usefully help during the operation of a lathe machine. The most they could do is clean the lathes (if they are off) and turn the lathes back on. However, the worker needs to be briefed on the lathe's risks and safety measures.
Lathes have a conveyor belt, upon which the workpiece is placed. These conveyor belts are designed in such a way so that the workpiece arrives at the turning station in a specific position. The turning process is then done automatically. Afterwards, the workpiece is guided out and taken from the machine. The loading and unloading process can be undertaken automatically by an industrial robot. If turning is done automatically, it is important to have continuous quality control. The general wearing out of tools can be identified through regular and thorough checks. This prevents the production of waste and the risk of complaints. Just like all cutting machines, lathes have the need to be regularly cleaned. Cooling lubricants and chippings are very adhesive and can form hard crusts. It is necessary to clean the lathe daily and conscientiously.
Lathes are machine tools on which operations such as turning, drilling, cutting and sanding can be performed on a rotating workpiece. There are many different kinds of lathe machines available. Here is a selection of those most commonly found on used industrial machinery auction sites. A good example for a type of lathe is the BAILEIGH bench lathe, here is also the specification of this type of machine for you to get a general idea.
|Baileigh Bench Lathe - PL-1022VS Specs|
|Spindle Speeds||50-2000 rpm (Variable)|
|Tool Slide Travel||1.89"|
|Range Of Metric Threads||0.4 - 3.4 mm|
|Range Of Inch Threads||8 - 56 T,P.I.|
|Shipping Weight||403 lbs.|
Lathes are extremely versatile, precision machine tools on which various actions can be carried out, so they are very much in demand in a multitude of manufacturing industries and businesses. Due to this usefulness and popularity used metal lathes for sale are very much sought after. However, if you look for second hand lathes for sale online you are more than likely to find what you need, due to the wide selection of used industrial equipment auctions that have developed in recent years. It's a fact that, though, this important piece of equipment can prove to be expensive, especially when it comes to CNC lathes. Fortunately, there is a solution to this problem in the form of used metal lathes, which are often easy to obtain at significantly lower prices than their brand new counterparts. Additionally, if you see a used lathe for sale you know that the chances are it's been well taken care of, has been built to be durable and robust and will prove to be dependable. If you are looking for a used metal turning lathe for sale then you will find low prices, a wide selection of all types of lathes and complete convenience at used industrial machinery auctions, the number one source for this kind of equipment.
As we know a lathe is a machine that is used to produce precise parts. These components are generally produced as mechanical components for other machines stress on a lathe machine will impact the precision to which it can process workpieces. The storage areas and guideways start to give way and the static components can lose their angularity. This is usually not caused by age, but the way and regularity in which the lathe is used. This impacts their dimensional accuracy. Therefore, it is recommended to produce a test component on a used metal lathe for sale in order to see clearly what the machine's operational capability is. Used lathes can be easily bought at a bargain price at second hand market. There are numerous service providers that can repair used lathes for sale for a good price in case if a second hand lathe is broken. Buying a used lathe always requires expertise and it is important to undertake a thorough examination of the used lathe before buying. Several used lathes for sale can be found on the TradeMachines.com used industrial machinery market which are aggregated from our partner auction houses and markets. You can buy a used metal lathe on the portal of individual auction houses to which you will be taken from our website in just one click.
Regarding lathes, it is better to buy a good-quality used machine than a bad-quality new machine. In recent times, there have been numerous suppliers of lathe machines from countries where there is no quality certifications. These machines can undertake the require tasks, but if they are particularly cheap, they usually have a very restricted working life. Machines made by German or European manufacturers can be a decade old, and still perform well in the long run. Recommended manufacturers of lathes are HEYLIGENSTAEDT, HARBOR FREIGHT, GILDEMEISTER, DÖRRIES, GRIZZLY, WALDRICH, WEILER and MEUSER.