- Auction: 1 day left
Italy | Longiano
Italy | Longiano
Italy | Spilimbergo
Germany | Wassenberg
COLCHESTER Tornado 80 CNC Lathe - crank diameter over bed: 420 mm - crank diameter over swing: 280 mm - X-Axis stroke: 165 mm - bed inclination: 60° - spindle centre, height over ground: 875 mm - spindle nose: A2-5 - tow bar passage: 42 mm - spindle bearing front (inside diameter): 80 mm - spindle motor: 7,5 / 11 kW - min. spindle speed at full performance: 750 / 1000 min-1 - diameter of turret disc: 340 mm - lathe tool section: 20 x 20 mm - max. diameter of boring bar: 32 mm - X-Axis-way under rotation center: 22 mm - width of cross slide: 213 mm - width over x-axis-slipways: 187 mm - width over z-axis-ducts measured: 304 mm for more details see pictures
Info-mailer for "Lathes"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
United States | Chelmsford
Switzerland | Bellmund
Germany | Hameln
Switzerland | Reinach
TRAUB TNS 60 CNC lathe working area: - spindle passage (max. bar diameter): 60 mm - turning diameter: 200 mm - turning length: 490 mm - max. swing: 450 mm - longitudinal slide travel: 490 mm - face slide travel: 168 mm cross slide: - rapid traverse (X and Z direction): 10/15 m/min - feed (X and Z direction): 4000 / 8000 N turret: - tool tapers (quantity): 12 - quantity of driven tools: 6 - circuit time (1/6 stations): 0.6/1.4 sec - with STAMAG DN 60 bar loader - with TRAUB TX 8D control repairs and overhauls: - March 15, 2016: replacement of shaft encoder of C axis - for further information see photos, pdf and video
Germany | Solingen
Switzerland | Reinach
Serial No.: J06240659, 750 W, up to 2000 rpm, turning length 500 mm, turning diameter over bed 240 mm, turning diameter over support approx. 145 mm, with lathe tool holder, 3-axis digital read out, on base cabinet, as well as one telescopic drawer cabinet, LISTA, with large stock of accessories such as drill bits, live centres, lathe tools, indexable inserts, collets, hand tools, steol holder, 4 sets of clamping jaws, clamping arbors, external rotating rings and much more, with lighting, see photos
Switzerland | Bellmund
With tailstock, Machine No.: 163, turning length approx. 600 mm, turning diameter over bed up to 450 mm, turning diameter over support with using of tailstock approx. 200 mm, with height adjustable spindle, up to 3000 rpm, with 3-jaw chuck, diameter 110 mm, with base cabinet, LISTA, 5 drawers, with content, see photos
precision screw cutting and bar lathe; 400 V; 2.4 kW; anticlockwise; for surfacing, longitudinal turning, conical turning and thread cutting; equipped with gesloten aanvoeraandrijving voor snel en bekwaam omschakelen van de aanvoerversnellingen; inductie geharde en precisiegeslepen prismabed geleidingen; Camlock spilneus, ASA D1-4", volgens DIN55029; alle geleidingen door spieën na stelbaar; uitneembare bedbrug voor het draaien van grotere diameters; bovenslede, onder ca. 90° verstelbaar; plaatstalen machineonderstel met 2 afsluitbare deuren met opbergmogelijkheden; hoge en precieze afwerkingsgraad; geharde en geslepen tandwielen en assen, precisielopend in een oliebad; digitale uitlezing, DPA2000, op 3 assen gemonteerd; keuzeschakelaar rechts; aparte noodstop en aparte start-/stopknop; sterk geribd prismabed van gietstaal, GG30; inductie gehard en fijn geslepen; klauwplaat-afscherming met microschakelaar; beitelafscherming; leispilafscherming en spatwand; mechanische noodstop; voetrem
TRAUB TNS 60 CNC lathe working area: - spindle passage (max. bar diameter): 60 mm - turning diameter: 200 mm - turning length: 490 mm - max. swing: 450 mm - longitudinal slide travel: 490 mm - face slide travel: 168 mm cross slide: - rapid traverse (X and Z direction): 10/15 m/min - feed (X and Z direction): 4000 / 8000 N turret: - tool tapers (quantity): 12 - quantity of driven tools: 6 - circuit time (1/6 stations): 0.6/1.4 sec - with TRAUB TX 8D control - with KNOLL chip conveyor - for further information see photos, pdf and video
Germany | Wallerstein
Distance between centres: 950 mm, max. swing diameter over bed 410 mm, over cross slide 200 mm, max. workpiece weight 900 kg, spindle bore 54 mm, max. chuck diameter 250 mm, max. torque value 700 Nm, longitudinal stroke 950 mm, facing stroke 230 mm, tailstock quill taper MK 4, quill diameter 65 mm, max. quill stroke 120 mm, max. tailstock adjustment manual 950 mm, feed speed longitudinal- and cross slide 0,001 - 20 mm/r, rapid traverse longitudinal 10 m/min., rapid traverse cross 5 m/min., feed force longitudinal/cross 8000 / 5000 N, thread pitch metrical 0,1 - 250 mm, spindle speed from 1 up to 750 rpm and 4 up to 3000 rpm (2 gear levels), continuous from 1 up to 3000 rpm, see photos
TRAUB TND 350 G CNC lathe working area: - spindle passage (max. bar diameter): 65 mm - turning diameter over cross slide: 190 mm - turning length: 535 mm turret: - tool tapers (quantity): 12 - driven tools: 6 cross slide: - travels (crossways/longitudinal): 134 / 535 mm - rapid traverse (crossways): 10000/10000 m/min - rapid traverse (longitudinal): 20000/20000 m/min - with TRAUB SYSTEM TX 8F control - with KNOLL 200 S-1 chip conveyor - with QUICKLOAD bar loader repairs and overhauls: - May 25,2016: mechanical and electrical overhaul of the turret, new axis reinforcement of V axis - for further information see photos, pdf (only in French) and video
Switzerland | Reinach
Serial No.: 13280269, speed range 30 - 4000 rpm, 1,5 kW, spindle taper MK 4, spindle bore 26 mm, bed width 180 mm, top slide travel 60 mm, cross slide travel 160 mm, tailstock taper MK 2, tailstock quill stroke 85 mm, turning diameter over bed 260 mm, turning diameter over support 170 mm, distance between centres 625 / 660 mm, with NC-powerdrive, with handwheel, steel holder, as well as further basic equipment such as a 3-jaw chuck, diameter 125 mm, as well as a manual carriage displacement, 4 further tool holders, 1 set of clamping jaws, see photos, with original packed coolant unit - never used before
Germany | Velbert
Serial number 16, circulating diameter over bed 515 mm, max. Turning diameter 410 mm, standard turning diameter 199.7 mm, Max. Turning length 275 mm, max. Rod passage (spindle bore) 51 Mm, travel range X axis 235 mm, travel range Z axis 310 mm, Spindel speed range 45 - 4500 rpm, spindle delta JISA2-6, number Of the positions in the tool turret 10, rapid traverse speed X and Z 30000 mm / min., Spindle drive (30 min / nominal duration) 7.5 / 5.5 kW, Power consumption Nominal continuous operation 22 kVA. The machine is Equipped with MORI SEIKI CNC control MSC 803, power chuck With various clamping jaws, tailstock, chip conveyor, Cooling equipment and comprehensive documentation in English.
Germany | Wallerstein
Centre height: 200 mm, max. swing diameter over bed: 410 mm, max. swing diameter over slide: 200 mm, max. turning length: 950 mm, spindle head: DIN 55027 - size 6, spindle bore: diameter 54 mm, power: 11 kW, speed range max.: 3000 rpm, accessories: 1 live steady rest, 1 fixed steady rest, special equipment: electric magnetical locking brake for main spindle, included in delivery: key bar chuck diameter: 250 mm, incl. turret head quick-change steel holder Parat - size 2, see photos
Germany | Fröndenberg/Ruhr
Germany | Vierkirchen
Distance between centers 1000 mm, max. swing diameter over bed 400 mm, over slide 260 mm, tailstock quill stroke 150 mm, machine with digital readout as well as 2 x 3-jaw chuck and further accessories, machine was only used for educational purposes, including pallet with accessories of steady rests, quick mount, revolving lathe center as well as unused face plate
Germany | Remscheid
Machine number 574, counter reading - hours of operation at the day of data recording 21500, turning diameter over bed 540 mm, over support 300 mm, distance between centers 1000 mm, center height 280 mm, swing diameter over bed 570 mm, over facing slide 340 mm, bed width 350 mm, displacement path facing slide 340 mm, displacement path upper support 140 mm, facing slide 700 x 220 mm, bed slide guide length 560 mm, spindle head acc. to DIN 55027-8, spindle diameter in front bearing 100 mm, spindle bore 66 mm, drive power 60/100 % duty cycle 15/11 kW, spindle speed range 1 - 2500 rpm, rapid traverse speed longitudinal and cross 7.5/3.5 m/min, tailstock quill diameter 80 mm, tailstock quill stroke 200 mm, interior cone of the tailstock quill MK 5, with 3-jaw chuck FORKARDT, diameter 315 mm, 4-fold-quick-change tool holder PARAT with various inserts, control SIEMENS SINUMERIK 805, documentation for machine and control
Switzerland | Untersiggenthal
Serial No.: YS-2657, from 20 up to 2000 rpm, max. turning diameter 780 mm, max. cutting diameter 750 mm, max. cutting height 700 mm, spindle holder diameter 170 mm, 12-x tool turret, X 500 mm, Z 800 mm, rapid traverse X 20 m/min., rapid traverse Z 20 m/min., with CNC control system, FANUC, Type OI-TC, with 3-jaw chuck, diameter 450 mm, with accessories of clamping jaws, fixing material, power consumption 48 kVA, spindle power 18,5 / 22 kW, with driven tools, 4 pieces, speed of driven tools from 50 up to 5000 rpm, operating hours approx. 17900, spindle hours approx. 4200
precision screw cutting and bar lathe; 400 V; 2.4 kW; anticlockwise; for surfacing, longitudinal turning, conical turning and thread cutting; equipped with gesloten aanvoeraandrijving voor snel en bekwaam omschakelen van de aanvoerversnellingen; inductie geharde en precisiegeslepen prismabed geleidingen; Camlock spilneus, ASA D1-4", volgens DIN55029; alle geleidingen door spieën na stelbaar; uitneembare bedbrug voor het draaien van grotere diameters; bovensledes, onder ca. 90° verstelbaar; plaatstalen machineonderstel met 2 afsluitbare deuren met opbergmogelijkheden; hoge en precieze afwerkingsgraad; geharde en geslepen tandwielen en assen, precisielopend in een oliebad; digitale uitlezing DPA2000, op 3 assen gemonteerd; keuzeschakelaar rechts; aparte noodstop en aparte start/stopknop; sterk geribd prismabed van gietstaal, GG30, inductie gehard en fijn geslepen; klauwplaat-afscherming met microschakelaar; beitelafscherming; leispilafscherming en spatwand; mechanische noodstop; voetrem
TRAUB TND 400 CNC lathe working area: - spindle passage (max. bar diameter): 65 mm - swing over support: 240 mm - swing over bed: 480 mm - turning length: 800 mm turret: - tool tapers (quantity): 12 - driven tools: 6 travels and speed: - travel (longitudinal): 2650 mm - travel (vertical): 195 mm - speed (longitudinal): 45000 mm/min. - speed (vertical): 6000 mm/min. - with TRAUB SYSTEM TX 8F control - with KNOLL 200 S-1 chip conveyor repairs and overhauls: - June 28, 2016: new axis reinforcement (XZ) - November 24, 2016: turret checked and new reinforced X rolling spindle - December 09, 2016: new screen - for further information see photos, pdf and video
Germany | Heiligenhaus
NAKAMURA STW 40 CNC Lathe Machine number: W 400501 With a left and right spindle:30/22 kW Intelligent handwheel, air escape from outside Coolant device for the inside CNC-gantry loader Type GR 210 For workpieces 1 x 20 kg Workpiece memory WS 443 20 pallets for workpieces up to diameter 320 mm, without stacking unit Technical details see documents and photos!
Germany | Duisburg
FAT TOR 630 M Centre Lathe With rotary steel holder, tailstock turning length 1500 mm turning diameter over bed 630 mm over support 400 mm, 3-jaw chuck diameter 310 mm up to 1800 rpm, hollow spindle 100 mm Fabrication No.: 46765 with accessories such as rotary tips and drill bits as well as steel lathe tools and additional set of clamping jaws for clamping chucks
Germany | Malsch
GILDEMEISTER NEF 500 x 1500 Teach-In Lathe - Machine No.: 504379 - turning diameter over bed: 500 mm - turning diameter over bed slide: 290 mm - distance between centres: 1500 mm - centre height: 250 mm - tailstock-quill diameter stroke: 80 / 180 mm - tailstock-quill taper: MK 5 - tool holder: MULTIFIX size C - longitudinal feed: 5000 mm/min - spindle taper: DIN 55027 - 1 Multifix insert For further details see photos and PDF attachment
Italy | Spilimbergo
You are bidding on a high-precision toolmaker and lathe Weiler Matador VS1. Workspace: Gr. Swing over bed: 297mm Gr. Swing over carriage: 160mm max. Turning length: 500 mm spindle bore: 36mm Change gears: 21, 25, 28, 33, 63, 80, 84, 120, 127 Faceplate: Diameter 280mm Collet Set up diameter 27mmDie machine is fully functional and can be inspected and tested under power it werden.Da around a private auction is, is not guaranteed. The return is excluded. The machine comes from a training workshop, is very well maintained and therefore has few operating hours.
TRAUB TNS 60 CNC lathe working area: - spindle passage (max. bar diameter): 60 mm - turning diameter: 200 mm - turning length: 490 mm - max.swing: 450 mm - longitudinal slide travel: 490 mm - face slide travel: 168 mm cross slide: - rapid traverse (X and Z direction): 10/15 m/min - feed (X and Z direction): 4000 / 8000 N turret: - tool tapers (quantity): 12 - quantity of driven tools: 6 - circuit time (1/6 stations): 0.6/1.4 sec - with TRAUB TX 8D control - with KNOLL 240 S-1 chip conveyor repairs and overhauls: - August 05, 2015: turret checked and sealed, new clamping cylinders and pressure reservoir - August 20, 2015: new hydraulic pump - November 05, 2015: new belts (main spindle) - September 05, 2016: new seals - for further information see photos, pdf and video
Germany | Alzenau
Germany | Asperg
LICO LNE 42 CNC Lathe - collet chuck diameter: 42 mm, Type F 48 - swing diameter: 330 mm - height of spindle centre approx.: 900 mm - spindle nose: ISO A2-5 - total connected load: 20 kVA - hydraulic tank: 25 l - hydraulic pump: 1,5 kW - coolant tank: 150 l - coolant pump: 0,5 PS - with accessories of tool holders (also driven tools) - with chip conveyor, bar feeder and clamping blocks for reverse side processing - for further information see photos and PDF attachment
Germany | Barth
Through technical renovation, the machine is for sale - this was still used and now has to give - for the functionality I do not guarantee, but I am still myself convinced - the details, refer to the pictures - you have also the possibility to to test / to display day before sale date - at purchase and pick we dismantled the machine and charged to a by you vehicle provided - for the removal, you are responsible and will invalidate the liability of the seller - it is a second sale, which still was not offered because it is covered for some time - a total price can be negotiated after purchase - for a fixed price sale there are ready
Netherlands | Borculo
Netherlands | Veld
Netherlands | Zwolle
Netherlands | Zwolle
Since lathes are most important and standard precision cutting machines, choosing used lathes by checking on the quality standards from the below list of machines will be a challenging task. We made it more simple and easy to choose, metal turning lathe from the best manufacturers and various sellers aggregated here in one place. With clear specs details, prices and sale end date if it is an industrial auction. You can find the best used lathes for sale right here at this vast and broad selection from the online used market!
The lathe is the standard metalworking machine used today to produce rotationally symmetric metal workpiece though precise, cutting production processes. There is a wide range of rotational components that can be produced on a lathe machine. This includes components from simple, cylindrical shafts, circular and spherical formed components, to complex structures like gear theeth. Additional devices are required on a lathe when producing uneven forms. Today, universal metal lathes allow for the maximum turning of a workpiece.
On a lathe, the workpiece is clamped in between the lathe spindle and the tailstock. There are advantageous pre-products that already have an approximated level of roundness. Angular or irregularly formed products, like special profiles, tend to have imbalances. These imbalances can lead to imprecise processing or damages to the metal lathe machine. Ideal pre-products that are processed on metal lathes include continuously cast round bars made out of solid material, or round pipes with thick walls. Long workpieces are additionally held up via supports. Once the workpiece is clamped in and spun into rotation, it is guided to the cutting tool via a tool carriage. The chippings are continuously removed by its adjustable feed. The carriage can traversely or longitudinally move towards the rotional axis of the workpiece.
The basic requirement of a metal turning lathe is that it needs to stand solidly. This is why it has a cast iron frame. Large lathes and lathe centers need an additional cement foundation. This absorbs the natural oscillations of the machine lathe as well as external vibrations that occur in close promiximity to the machine. The precision of turned components that are produced within a hundreth of a milimeter is directly impacted by these distributing vibrations. An electric motor and a gear box are used to power the lathe's spindle. The rotation speed and the turning of the spindle needs to be adjustable. The more of the lathe's parameters that can be adjusted, the more comprehensive the processing of a component can be. Spindles, supports, carriages and tailstocks are integrated into a monolithic grey cast iron cover. This needs to be particularly good quality, massive and precisely constructed. The disadvantage of a cast component is that it cannot be welded. Bangs, cracks or other damages to the body usually means that the whole machine has to be thrown away. Therefore, metal lathes should be installed in a certain place and then not moved again. Useful accessories for a machine lathe include lighting and an extraction system. Lathes metal also contain CNC control and a cover. Instead of a tailstock, large high-end lathes have two powered spindles. Complete lathe machining centres also having a tool changer. The most common tasks undertaken on a lathe are straight turning, face turning, drilling, reboring and the production of internal and external threads.
Depending on the turning axis, lathes are available either in a vertical or horizontal construction. Vertical lathes are used for processing components with a large cross section; the components are vertically clamped in and turned. They are usually available without an additional chuck. One of the most common types is the horizontal lathe. These are generally called universal lathes. The universal lathe is usually used for training purposes. There is an enormous range of metal lathe machines for sale, available in all sizes. The small metal lathes are used for DIY purposes or by watchmakers. The largest lathes can take up an entire industrial hall. The most commonly used lathes are the mid-sized universal lathes, CNC lathes and automatic lathes.
Workers who want to operate a lathe require a certain level of qualification before they can be authorised to do so. Beginner courses cost over 1,000 Euros at vocational training institutes. This is the recommended basic requirement for freely operating a lathe center. Ideally, lathes are operated by trained cutting machine operators. In addition to training, a high level of experience is also required. Therefore, trained turners (like welding machines) can constantly increase their qualifications with additional certificates. Laymen and unskilled workers would not be able to usefully help during the operation of a lathe machine. The most they could do is clean the lathes (if they are off) and turn the lathes back on. However, the worker needs to be briefed on the lathe's risks and safety measures.
Lathes have a conveyor belt, upon which the workpiece is placed. These conveyor belts are designed in such a way so that the workpiece arrives at the turning station in a specific position. The turning process is then done automatically. Afterwards, the workpiece is guided out and taken from the machine. The loading and unloading process can be undertaken automatically by an industrial robot. If turning is done automatically, it is important to have continuous quality control. The general wearing out of tools can be identified through regular and thorough checks. This prevents the production of waste and the risk of complaints. Just like all cutting machines, lathes have the need to be regularly cleaned. Cooling lubricants and chippings are very adhesive and can form hard crusts. It is necessary to clean the lathe daily and conscientiously.
Lathes are machine tools on which operations such as turning, drilling, cutting and sanding can be performed on a rotating workpiece. There are many different kinds of lathe machines available. Here is a selection of those most commonly found on used industrial machinery auction sites. A good example for a type of lathe is the BAILEIGH bench lathe, here is also the specification of this type of machine for you to get a general idea.
|Baileigh Bench Lathe - PL-1022VS Specs|
|Spindle Speeds||50-2000 rpm (Variable)|
|Tool Slide Travel||1.89"|
|Range Of Metric Threads||0.4 - 3.4 mm|
|Range Of Inch Threads||8 - 56 T,P.I.|
|Shipping Weight||403 lbs.|
Lathes are extremely versatile, precision machine tools on which various actions can be carried out, so they are very much in demand in a multitude of manufacturing industries and businesses. Due to this usefulness and popularity used metal lathes for sale are very much sought after. However, if you look for second hand lathes for sale online you are more than likely to find what you need, due to the wide selection of used industrial equipment auctions that have developed in recent years. It's a fact that, though, this important piece of equipment can prove to be expensive, especially when it comes to CNC lathes. Fortunately, there is a solution to this problem in the form of used metal lathes, which are often easy to obtain at significantly lower prices than their brand new counterparts. Additionally, if you see a used lathe for sale you know that the chances are it's been well taken care of, has been built to be durable and robust and will prove to be dependable. If you are looking for a used metal turning lathe for sale then you will find low prices, a wide selection of all types of lathes and complete convenience at used industrial machinery auctions, the number one source for this kind of equipment.
As we know a lathe is a machine that is used to produce precise parts. These components are generally produced as mechanical components for other machines stress on a lathe machine will impact the precision to which it can process workpieces. The storage areas and guideways start to give way and the static components can lose their angularity. This is usually not caused by age, but the way and regularity in which the lathe is used. This impacts their dimensional accuracy. Therefore, it is recommended to produce a test component on a used metal lathe for sale in order to see clearly what the machine's operational capability is. Used lathes can be easily bought at a bargain price at second hand market. There are numerous service providers that can repair used lathes for sale for a good price in case if a second hand lathe is broken. Buying a used lathe always requires expertise and it is important to undertake a thorough examination of the used lathe before buying. Several used lathes for sale can be found on the TradeMachines.com used industrial machinery market which are aggregated from our partner auction houses and markets. You can buy a used metal lathe on the portal of individual auction houses to which you will be taken from our website in just one click.
Regarding lathes, it is better to buy a good-quality used machine than a bad-quality new machine. In recent times, there have been numerous suppliers of lathe machines from countries where there is no quality certifications. These machines can undertake the require tasks, but if they are particularly cheap, they usually have a very restricted working life. Machines made by German or European manufacturers can be a decade old, and still perform well in the long run. Recommended manufacturers of lathes are HEYLIGENSTAEDT, HARBOR FREIGHT, GILDEMEISTER, DÖRRIES, GRIZZLY, WALDRICH, WEILER and MEUSER.