- Fixed Price
Germany | Günzburg
Year of Make: 2001
Germany | Günzburg
Year of Make: 2001
Germany | Nürtingen
Year of Make: 1973
Germany | Eislingen/Fils
Year of Make: 1982
Precision mechanic lathes in compact, universal design, from toolmaking in good condition, ideal for individual parts and small series. Original Heidenhan 2-axis digital display type 713, glass gauges are still to be installed. 24 speed steps in the range of 15 to 3,550 rpm. Spindelbohrung 45 mm, emergency stop, double pole reversible motor.
Info-mailer for "Lathes"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Germany | Duisburg
Lathe - cycle controled WEILER VOEST ALPINE E80
Germany | Mülheim an der Ruhr
Year of Make: 1995
Weiler Condor B
Germany | Ulm
Year of Make: 2001
WEILER L + Z Turning Machine Digital display: HEIDENHAIN 3-Axis digital display Technical data: Turning diameter over bed 330 mm Turning diameter over support 180 mm Spindle bore 40 mm Turning length 750 mm Speed range 22-2800 U / Min: Drive capacity: 5.5 KW | Machine weight approx .: 1130 kg | Accessories: three-pack rotary chuck 160 mm, chip pan + spike protection, Multfix Gr. B with 4 inserts, halogen light, coolant device, fixed and running tip
Weiler Commodor with digital display Weiler Commodor
Germany | Ebenweiler
Year of Make: 1990
Internal Item No .: 17029 Cylindrical Grinding Machine Weiler Commodor + Digital Display + Operating Instruction + Coolant Pump + Accessories (Multifix steel holder, chuck wrench, quick-action chuck chuck, turntables) Type: Commodor 230 BJ: 1990 Umlaufdurchm. Over bed: 475mm Spindle bore: 56mm Large internal taper: MK6 Pin hinge: MK4 Quill stroke: 150mm Number of revolutions: 13 - 2000 rpm. Suitable for threads from 0.3 to 80mm Slope power: 7,5 KW Bh30rssm Condition of the machine: The machine is in a technically good and fully functional state. The machine was technically checked. Mass (approx. L / W / H): 220 x 150 x 155cm Weight: approx. 1700Kg On request and for an extra charge, we organize transport for you.
Germany | Eislingen/Fils
Weiler Precision mechanic lathe in a compact, universal design of the type Matador with: - 160mm triple chuck, - Multifix A, - coolant device, - prepared for 2 axles Elsta digital display, - emergency emergency switch, - 230V power distributor, - main switch, - Toolbox, - Tool tray, - VDE 0100 06/2009.
Germany | Kamp-Lintfort
Germany | Schemmerhofen
Machine is in a used but good condition Machine is under power and is ready to go, you get a proper invoice with indicated VAT Purchase price net: 2000.- € gross: 2380.- € nevertheless, the machine is sold under exclusion of any warranty Errors and intermediate sales subject to Included in the purchase price: Free shipping from the location Schemmerhofen ATTENTION: No sales in Turkey For questions please phone: 07356/928171 or 0172 4784224
Germany | Wiesbaden
Year of Make: 1996
Germany | Eislingen/Fils
Year of Make: 1980
High-precision screw-cutting lathe WEILER Condor 81
Lithuania | Vilnius
Year of Make: 1988
Offer#825|Made in:Germany|Machine is in a total working condition.|Quantity:2|Specification:|Max diameter above the bed:330 mm|Spindle bore:40 mm|Turning speed:22-2800 mm|Spindle motor power:3 kW|Center height:175 mm|Max distance between centers:800 mm|Thread pitch:0.18 - 28 mm|Dimensions:|-Length:1900 mm|-Width:900 mm|-Height:1320 mm|Weight:1100 kg
Turning length: 2000mm, swing over bed: 900mm, swing over cross slide: 530mm, bed width: 600mm, spindle head size according to DIN 55027: 11, spindle diameter: 178mm, spindle bore: 128mm, rotational speed: 1-1120/min, torque: 6000Nm max., feed rate: 20mm/U max., quill stroke: 300mm, quill diameter: 140mm, length: 4400mm, width: 2600mm, height: 2150mm, weight: 8.5t.
UD 42 CNC Weiler
Year of Make: 1989
Germany | Lübbenau/Spreewald
Centre height: 360mm, turning length: 1000mm, swing over bed: 720mm, workpiece weight: 3,8t max., swing over cross slide: 430mm, spindle head size according to DIN 55027: 11, spindle diameter: 150mm, spindle bore: 106mm, rotational speed: 1-1800/min, feed force longitudinal: 20000N, feed rate: 0.001-50mm/U max., quill stroke: 225mm, quill diameter: 115mm, length: 6500mm, width: 2000mm, height: 1900mm weight: 7t.
Switzerland | Avenches
Germany | Ebenweiler
centre height: 200 mm, turning length: 1000 mm, spindle speed range from 63 up to 2000 rpm, spindle bore: approx. 52 mm, machine is equipped with wedge bar lathe chuck, diameter: 200 mm, with 2 set of jaws with different top jaws, see photos, MULTIFIX quick-change steelholder, size B, with 2 inserts, rearward chip protection wall
Guiding and Turning Milling Machine WEILER Condor 81
Year of Make: 1985
Equipment: - 3-jaw chuck and cowl protection - 2-axis digital display - Multifix basic body A and 2 Multifix tool holder - Cover strip for guide and traction spindle - Cooling device - Spray wall - Work lamp ************* ************************************************** **************** !!! NEW FOR YOU AS SERVICE !!! Machine leasing up to 60 months without deposit, without residual value, personal advice and individual leasing rate calculation gladly on request. ************************************************** *****************************
Germany | Wiesbaden
Year of Make: 1985
Germany | Cadolzburg
We offer for sale: Precision turning machine of the manufacturer Weiler. Model: LZ330.MEInternal number: ME000115. Please specify with questions. Many Thanks! The precision lathe comes from a vocational school of metalworking. It is in an excellent condition, technically as well as optically, and was overhauled. After the general overhaul, they were no longer used The technical inspection and functional test was carried out by our technical staff. You are welcome to check the precision lathe, by agreement. Equipment: Stepless drive Spindle protection Machine light Operating instructionsRohm Three-rotor chuckRoehm Four-jaw chuck Multifix B Further accessories on request. Prices and other technical data on request. Our expert staff will be happy to advise you! Your contacts are: Ms. Barbara Frongia: Sales Representative Mr. Bernd Engelhardt: Technical Sales Our opening hours: Monday to Thursday: 9am to 4pm Friday: 9am to 1pm sales Support. Thank you for your interest!
Serbia | Александровац
Inventory number:6011405003|Type:160 CNC|CNC control:BOSCH CC 200 T|Serial number:190|Centre height:160 mm|Distance between centres:600|Swing over cross-slide:140|Swing over bed:240|Longitudinal travel (Z-axis):325|Transversal strocke (X axis):250|Turret slide number:1|Number of positions turret 1 :4
Year of Make: 1989
Switzerland | Avenches
Netherlands | Oisterwijk
Germany | Ebenweiler
We are looking forward to welcoming you to our new Ebay shop. We have created a new Ebay account (Sicka-Werkzeugmaschinen GmbH) due to the change of name. Formerly "Simasi * 123" with over 600 positive evaluation points. Please also note our new location in 88370 Ebenweiler Internal article no .: 17024 Guiding and turning spindle machine Weiler Matador VS2 Mach.-No .: 3242 + Operating instructions The machine is equipped with the following accessories: - 280mm - Röhm 4- jaw chuck 160mm - 3- jaw chuck 160mm (mounted) - Lynette - flange - various grain tips (rotating and fixed) - Multifix A steel holder with base holder - various turning steels - interchangeable chucks - drill chuck - machine lamp - spindles with spindle nut (2pcs) Technical specifications: Speed: 15 - 3550 rpm. (With scale) Tip height: ca.145mm Tip width: approx. 500mm Reversing play, lengthwise: approx.1mm Reversing play, crosswise: approx. 0.3mm Reversing top support: ca.0.8mm The machine is technically OK Visually, s
Germany | Bad Rappenau
I am selling old-fashioned, my hamlet L + Z-lathing machine. technical specifications: height 105 mm, width 450/500 mm, over bed 220 mm, spindle bore 23 mm Ø, speed range 50-2000 rpm, stepless, 18 feeds; in each case longitudinally and in plan, motor 380 volts; 0,75 hp Weight approx. 280 kg The electrical system was modified several years ago. Accessories :: Emergency stop according to VDE; 3-B-feeding hamlet 110 Ø with internal and Outside shoe; 4-B-food hamlet 110 mm with inside and outside baking; Bed stop; Americ. Steel holder; tray; AVGE. centering; Hard top; Change gears; companion flange; Retaining ring; Tool; original user manual and AWF card.
Internal Article No .: 17024 Guiding and Turning Spindle Turning Machine Weiler Matador VS2 Mach.-No .: 3242 + Operating Instructions The machine is equipped with the following accessories: - face plate dia. 280mm - Roehm 4-jaw chuck 160mm - 3- jaw chuck 160mm (mounted) - Lynette - Flange - Various coarse tips (rotating and fixed) - Multifix A steel holder with base holder - Various turning heads - Exchangeable chucks - Drill chuck - Machine spindle - Spindles with spindle nut (2pcs) Ch8a8cfm Specifications: Speed: 15 - 3550 rpm. (With scale) Top height: ca.145mm Top range: approx. 500mm Reversing play, length: approx.1mm Reversing play, cross: approx. 0.3mm Reversing top support: ca.0.8mm The machine is Technically OK Visually, stronger usage traces are available. The machine has already been overpainted. Mass (approx. L / W / H): 150/65/125 Weight: approx. 600Kg Subject to prior sale. On request and for a fee the shipping can be arranged
Heneka & Wollensmaschinenmachine-Reparaturen und Handel Wittumstr.6 76707 Hambrücken Phone: 07255-397270 Fax 07255-397269 E-Mail email@example.com Weiler Matador VS-2 Guided tour & Turn spindle turning machine with 3-axis digital display from Heidenhain super condition !! Technical data: >> Machine no. 91-169 Year of manufacture 1991 >> Tip height 140 mm >> Center distance 500 mm >> Speed: 15 - 3550 rpm >> Spindle clearance 36mm >> Short cone head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feedrates of 0.012 up to 0.9 mm / U >> Possible threads Metric, inch, modulus and diametrical pitch >> Metric thread tensions from 0.25 to 12 mm >> Weight approx. 700 Kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3 axis digital display Heidenhain >> quick-release clamp, 29 pcs. collets from 1 to 29mm 1 mm ascending >> >> 3 pcs. baking >> Mulifix size A with 2 pcs Steel holders >> coolant equipment >> centering tip >> spindle protection >> bed stop >> elec. Spi
Milling Machine Weiler Matador (No.2) It is a turning machine from a vocational school. Circulation diameter over bed 300 mm Above plan slide 160 mm Spindle bore 36 mm Taper of tapered tailstock MK 3 24 Spindeldrehzahlen 15 - 3550 rpm. Feedways along 0.01 - 0.704 mm plan 1/2 d. Longitudinal feedthroughs Dimensions: L 1,50 x W 0,80 x H 1,25 m Multifix Weight: 600 kgFor further questions, please do not hesitate to contact us by phone or e-mail.Machine can and is also expressly desired, before auction end visit Althaus Maschinenhandel Team shipping by arrangement and additional costs possible. Please inform us about your shipping costs. Shipping free with Hallenkran warranty, return, revocation or a warranty is excluded. The purchaser agrees to submit a bid to be a trader. Upon delivery of a bid, the bidder accepts that o.g. Goods are sold without any warranty, guarantee, right of return and right of revocation. It is sold / taken over as a spare distributor. Make an offer only if you are
Heneka & Wollensmaschinenmachine-Reparaturen und Handel Wittumstr.6 76707 Hambrücken Phone: 07255-397270 Fax 07255-397269 E-Mail firstname.lastname@example.org Weiler Matador VS-1 Guided Tours & Turning spindle lathe with 3-axis digital display K & C NEW in special finish !!! Technical data: >> Machine no. 5590 Year of manufacture ca.1980 >> Top height 140 mm >> Center width 500 mm >> Speed: 30 - 3550 rpm >> Spindle passage 36mm >> Short cone head DIN 55022-5 with bayonet closure > Tailstock MK 3 >> feeds from 0.010 to 1.184 mm / U >> possible threads Metric, inch, modulus and diametral pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 Kg >> Length 1, 4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3 Axis digital display from K & C New, 12 months manufacturing warranty Functions: switching mm / inch, ABS / INC coordinate selection, halving the display value, reference mark, tool programming 1 >> >> >> >> >> >> >> >> >> >> >> Mulifix size A with 3 steel brackets
Milling machine Weiler Matador (No.1) This machine is a turning machine from a vocational school. Top height 150 mm Top width 500 mm Gr. Circulation diameter over bed 300 mm Above plan slide 160 mm Spindle bore 36 mm Taper of tapered tailstock MK 3 24 Spindeldrehzahlen 15 - 3550 rpm. Feedways along 0.01 - 0.704 mm plan 1/2 d. Longitudinal feedthroughs Dimensions: L 1,50 x W 0,80 x H 1,25 m Multifix Weight: 600 kgFor further questions, please do not hesitate to contact us by phone or e-mail.Machine can and is also expressly desired, before auction end visit Althaus Maschinenhandel Team shipping by arrangement and additional costs possible. Please inform us about your shipping costs. Shipping free with Hallenkran warranty, return, revocation or a warranty is excluded. The purchaser agrees to submit a bid to be a trader. Upon delivery of a bid, the bidder accepts that o.g. Goods are sold without any warranty, guarantee, right of return and right of revocation. It is sold / taken over as a
Since lathes are most important and standard precision cutting machines, choosing used lathes by checking on the quality standards from the below list of machines will be a challenging task. We made it more simple and easy to choose, metal turning lathe from the best manufacturers and various sellers aggregated here in one place. With clear specs details, prices and sale end date if it is an industrial auction. You can find the best used lathes for sale right here at this vast and broad selection from the online used market!
The lathe is the standard metalworking machine used today to produce rotationally symmetric metal workpiece though precise, cutting production processes. There is a wide range of rotational components that can be produced on a lathe machine. This includes components from simple, cylindrical shafts, circular and spherical formed components, to complex structures like gear theeth. Additional devices are required on a lathe when producing uneven forms. Today, universal metal lathes allow for the maximum turning of a workpiece.
On a lathe, the workpiece is clamped in between the lathe spindle and the tailstock. There are advantageous pre-products that already have an approximated level of roundness. Angular or irregularly formed products, like special profiles, tend to have imbalances. These imbalances can lead to imprecise processing or damages to the metal lathe machine. Ideal pre-products that are processed on metal lathes include continuously cast round bars made out of solid material, or round pipes with thick walls. Long workpieces are additionally held up via supports. Once the workpiece is clamped in and spun into rotation, it is guided to the cutting tool via a tool carriage. The chippings are continuously removed by its adjustable feed. The carriage can traversely or longitudinally move towards the rotional axis of the workpiece.
The basic requirement of a metal turning lathe is that it needs to stand solidly. This is why it has a cast iron frame. Large lathes and lathe centers need an additional cement foundation. This absorbs the natural oscillations of the machine lathe as well as external vibrations that occur in close promiximity to the machine. The precision of turned components that are produced within a hundreth of a milimeter is directly impacted by these distributing vibrations. An electric motor and a gear box are used to power the lathe's spindle. The rotation speed and the turning of the spindle needs to be adjustable. The more of the lathe's parameters that can be adjusted, the more comprehensive the processing of a component can be. Spindles, supports, carriages and tailstocks are integrated into a monolithic grey cast iron cover. This needs to be particularly good quality, massive and precisely constructed. The disadvantage of a cast component is that it cannot be welded. Bangs, cracks or other damages to the body usually means that the whole machine has to be thrown away. Therefore, metal lathes should be installed in a certain place and then not moved again. Useful accessories for a machine lathe include lighting and an extraction system. Lathes metal also contain CNC control and a cover. Instead of a tailstock, large high-end lathes have two powered spindles. Complete lathe machining centres also having a tool changer. The most common tasks undertaken on a lathe are straight turning, face turning, drilling, reboring and the production of internal and external threads.
Depending on the turning axis, lathes are available either in a vertical or horizontal construction. Vertical lathes are used for processing components with a large cross section; the components are vertically clamped in and turned. They are usually available without an additional chuck. One of the most common types is the horizontal lathe. These are generally called universal lathes. The universal lathe is usually used for training purposes. There is an enormous range of metal lathe machines for sale, available in all sizes. The small metal lathes are used for DIY purposes or by watchmakers. The largest lathes can take up an entire industrial hall. The most commonly used lathes are the mid-sized universal lathes, CNC lathes and automatic lathes.
Workers who want to operate a lathe require a certain level of qualification before they can be authorised to do so. Beginner courses cost over 1,000 Euros at vocational training institutes. This is the recommended basic requirement for freely operating a lathe center. Ideally, lathes are operated by trained cutting machine operators. In addition to training, a high level of experience is also required. Therefore, trained turners (like welding machines) can constantly increase their qualifications with additional certificates. Laymen and unskilled workers would not be able to usefully help during the operation of a lathe machine. The most they could do is clean the lathes (if they are off) and turn the lathes back on. However, the worker needs to be briefed on the lathe's risks and safety measures.
Lathes have a conveyor belt, upon which the workpiece is placed. These conveyor belts are designed in such a way so that the workpiece arrives at the turning station in a specific position. The turning process is then done automatically. Afterwards, the workpiece is guided out and taken from the machine. The loading and unloading process can be undertaken automatically by an industrial robot. If turning is done automatically, it is important to have continuous quality control. The general wearing out of tools can be identified through regular and thorough checks. This prevents the production of waste and the risk of complaints. Just like all cutting machines, lathes have the need to be regularly cleaned. Cooling lubricants and chippings are very adhesive and can form hard crusts. It is necessary to clean the lathe daily and conscientiously.
Lathes are machine tools on which operations such as turning, drilling, cutting and sanding can be performed on a rotating workpiece. There are many different kinds of lathe machines available. Here is a selection of those most commonly found on used industrial machinery auction sites. A good example for a type of lathe is the BAILEIGH bench lathe, here is also the specification of this type of machine for you to get a general idea.
|Baileigh Bench Lathe - PL-1022VS Specs|
|Spindle Speeds||50-2000 rpm (Variable)|
|Tool Slide Travel||1.89"|
|Range Of Metric Threads||0.4 - 3.4 mm|
|Range Of Inch Threads||8 - 56 T,P.I.|
|Shipping Weight||403 lbs.|
Lathes are extremely versatile, precision machine tools on which various actions can be carried out, so they are very much in demand in a multitude of manufacturing industries and businesses. Due to this usefulness and popularity used metal lathes for sale are very much sought after. However, if you look for second hand lathes for sale online you are more than likely to find what you need, due to the wide selection of used industrial equipment auctions that have developed in recent years. It's a fact that, though, this important piece of equipment can prove to be expensive, especially when it comes to CNC lathes. Fortunately, there is a solution to this problem in the form of used metal lathes, which are often easy to obtain at significantly lower prices than their brand new counterparts. Additionally, if you see a used lathe for sale you know that the chances are it's been well taken care of, has been built to be durable and robust and will prove to be dependable. If you are looking for a used metal turning lathe for sale then you will find low prices, a wide selection of all types of lathes and complete convenience at used industrial machinery auctions, the number one source for this kind of equipment.
As we know a lathe is a machine that is used to produce precise parts. These components are generally produced as mechanical components for other machines stress on a lathe machine will impact the precision to which it can process workpieces. The storage areas and guideways start to give way and the static components can lose their angularity. This is usually not caused by age, but the way and regularity in which the lathe is used. This impacts their dimensional accuracy. Therefore, it is recommended to produce a test component on a used metal lathe for sale in order to see clearly what the machine's operational capability is. Used lathes can be easily bought at a bargain price at second hand market. There are numerous service providers that can repair used lathes for sale for a good price in case if a second hand lathe is broken. Buying a used lathe always requires expertise and it is important to undertake a thorough examination of the used lathe before buying. Several used lathes for sale can be found on the TradeMachines.com used industrial machinery market which are aggregated from our partner auction houses and markets. You can buy a used metal lathe on the portal of individual auction houses to which you will be taken from our website in just one click.
Regarding lathes, it is better to buy a good-quality used machine than a bad-quality new machine. In recent times, there have been numerous suppliers of lathe machines from countries where there is no quality certifications. These machines can undertake the require tasks, but if they are particularly cheap, they usually have a very restricted working life. Machines made by German or European manufacturers can be a decade old, and still perform well in the long run. Recommended manufacturers of lathes are HEYLIGENSTAEDT, HARBOR FREIGHT, GILDEMEISTER, DÖRRIES, GRIZZLY, WALDRICH, WEILER and MEUSER.