- Fixed Price
Year of Make: 1988
Year of Make: 1988
Year of Make: 1996
Year of Make: 1994
Turning diameter over bed 720 mm Turning diameter over support 478 mm Turning length 2000 mm Center height 350 mm Workpiece weight 3000 kg Spindle diameter in front. Bearing 146 mm Spindle bore 105 mm Torque 7900 Nm Bedslide 1 Longitudinal travel 2000 mm Planhub 400/230 Quill diameter 100 mm Cone MK 5 Quill stroke 200 mm Tailstock adjustment 2000 mm Feed from 0.05 to 11.2 mm / min Rapid 3.6 m / min Pitch in mm 0.5 to 112 mm Slope in modules from 0.25 to 56 Slope in Whitworth 56 - 1/4 GG / inch Speed range of 24 - 2000 rev / min Engine speed 1450 U / min electrical design - voltage / frequency 380/50 V / Hz Camlock 8 Total power requirement 22 kW Space needs about 4 x 1.7 x 1.85 m 2-axis DRO Heidenhain
Year of Make: 1987
Info-mailer for "Lathes"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Year of Make: 2015
Brand: PBR Model: T500 500x6000mm Height of centers: 500 mm Chuck: 4 jaw diam 1000 Rapid traverse (x / y / z): 5 m / min Scope of Work: 1040x6000x150 mm Maximum workpiece diameter 1040 mm Distance between centers: 6000 mm Extras: Viewer 2 axes, Bezel, platform 4 jaw diam. 1000 Spindle hole: 150 mm Maximum length of workpiece: 6000 mm Max diam. machined from bar: 150 mm Machine weight: 10200 kg Max workpiece weight: 6000 kg Spindle power: 27 Kw Swing on Tour 1040 Swing over carriage: 690 Spindle speed: 800 rpm
Centre height: 400 mm X-axis: 450 mm Spindle taper: Cam Lock 8 " Feed range: 6 m / min Rapid advancements (x / y / z): 6.5 m / min Scope of Work: 700x1500x110 mm CNC: FAGOR 8055 Maximum workpiece diameter: 820 mm Distance between centers: 1500 mm Extras: lunettes, 3-jaw chuck Spindle hole: 105 mm Max. Torque 3000 Nm Number ranges: 2: I: 47-300 II: 310 - 2000 Machine weight: 5700 kg Max weight of part: 4000 kg Spindle power: 15/22 kW Swing bench: 525 Swing over carriage: 820 Z-axis: 1500 mm Spindle speed: 0-2000 rpm
Year of Make: 2017
ATTACCO MANDRINO: 8 "(C.L.) MAXIMUM DIAMETER: 425 mm BANNER WIDTH: 450 mm BAR STEP: 105 mm VISUALIZER: Including NET WEIGHT: 5650 KgATTACCO MANDRINO: NON-SMOKE MOTOR POWER: 17 (HP) REVISION YEAR: 2017 POINT HEIGHT: 350 mm DISTANCE POINT: 8 "(CL) DAMPER MOTOR POWER: 17 (HP) REVIEW YEAR: 2017 POINT HEIGHT: 350 mm DISTANCE POINT: 2000 mm MAXIMUM DIAMETER OF THE PART: 425 mm BANNER WIDTH: 450 mm BAR STEP: 105 mm VIEWER: Including NET WEIGHT : 5650 Kg
Year of Make: 1996
revised 2014 Spindle taper: 11 ASA Rapid advancements (x / y / z): 6.5 m / min Transmission range: 2: Scope of Work: 920x4000x130 mm CNC: FAGOR T8055 new with 12 months warranty Distance between centers: 4000 mm Extras: car completely overhauled and retrofitted Spindle hole: 130 mm Dimensions: 6700x2650 mm Machine weight: 8300 kg Spindle power: 55 kW Swing bench: 920 Swing over carriage: 550 Spindle speed: 8-1500 rpm
Year of Make: 1978
Year of Make: 1988
Year of Make: 1997
turning diameter 800 mm turning length 5000 mm control NUM PLUS 1060 T spindle bore diameter 130 mm total power requirement 30 (Spindelmotor) kW weight of the machine ca. 10 t dimensions of the machine ca. m c-axis chip conveyor follower rest fixed steady 2 Stk. tool holder CAPTO C6/C5 3 jaw chuck Ø 500 mm 3 jaw chuck Ø 310 mm
Year of Make: 1995
Year of Make: 1997
Centres height 400 mm. Centres distance 5.000 mm. Max. Ø over saddle 450 mm. Max. Ø over bed 800 mm. Ø Spindle 130 mm. Bed width 570 mm. Max. weight on centres 5 Tons. Spindle power 30 Kw. Spindle speeds 0 ÷ 1.500 Rpm. Total Weight 10 Tons. Cnc CNC NUM PLUS 1060 T Year 1997 Notes COMPLETE WITH: - “C” AXIS - MOTORISED TOOLS - N. 1 SELF CENTERING CHUCK Ø 500 MM. - N. 1 SELF CENTERING CHUCK Ø 310 MM. - N. 1 TURRET FOR CAPTO C6/C5 TOOL-HOLDERS - N. 2 CLOSED STEADIES - N. 1 FOLLOW STEADY - BORING SUPPORT - CHIPCONVEYOR - SAFETY PROTECTIONS
Year of Make: 1978
Year of Make: 1997
Distance between centres: 3.000 mm Centre height: 350 mm Swing: 720 mm over bed 500 mm over cross slide Digital readout: Sony X- and Y-axis Bedwide: 440 mm Spindle bore: 105 mm Spindel speeds: 15 - 1.500 Rpm. Feed: 0,05 - 11,2 mm/min. Featured with: - 1 Steady - Protection hatch chuck - Users manual Country of Manufacture: Italy Motor power: 20 kW Machine weight: 5.000 kg Machine LxWxH: 4.850 x 1.400 x 1.400 mm
Netherlands | Oisterwijk
Center lathe PBR T400
Germany | Willich
Turning diameter over bed 830 mm turning diameter over support 520 mm Mhdsnysl turning length 5000 mm turning diameter in cranking 1100 mm spindle diameter 130 mm speed 5-1000 (x24) rpm total power requirement kW machine weight approx t space requirement approx m 4-Jaw Chuck Ø 700 mm Steady Rest Ø 550 mm Steady Rest Ø 400 mm 2-Axis [...] Coolant Attachment
Center Lathe PBR T-500
Germany | Willich
Year of Make: 1998
Rotating diameter over bed 1040 mm Turning diameter over support 700 mm Turning length 4000 mm Spindle diameter 150 mm Speed 4-800 (x24) RPM Voltage 380 V Total power requirement kW Machine weight approx t Space requirement approx m Newall Topaz [...] 4-jaw chuck ø (Mm): 1000 Jia3mkj Fixed bezel ø (mm Cooling through the spindle
Germany | Tönisvorst
Year of Make: 1995
Since lathes are most important and standard precision cutting machines, choosing used lathes by checking on the quality standards from the below list of machines will be a challenging task. We made it more simple and easy to choose, metal turning lathe from the best manufacturers and various sellers aggregated here in one place. With clear specs details, prices and sale end date if it is an industrial auction. You can find the best used lathes for sale right here at this vast and broad selection from the online used market!
The lathe is the standard metalworking machine used today to produce rotationally symmetric metal workpiece though precise, cutting production processes. There is a wide range of rotational components that can be produced on a lathe machine. This includes components from simple, cylindrical shafts, circular and spherical formed components, to complex structures like gear theeth. Additional devices are required on a lathe when producing uneven forms. Today, universal metal lathes allow for the maximum turning of a workpiece.
On a lathe, the workpiece is clamped in between the lathe spindle and the tailstock. There are advantageous pre-products that already have an approximated level of roundness. Angular or irregularly formed products, like special profiles, tend to have imbalances. These imbalances can lead to imprecise processing or damages to the metal lathe machine. Ideal pre-products that are processed on metal lathes include continuously cast round bars made out of solid material, or round pipes with thick walls. Long workpieces are additionally held up via supports. Once the workpiece is clamped in and spun into rotation, it is guided to the cutting tool via a tool carriage. The chippings are continuously removed by its adjustable feed. The carriage can traversely or longitudinally move towards the rotional axis of the workpiece.
The basic requirement of a metal turning lathe is that it needs to stand solidly. This is why it has a cast iron frame. Large lathes and lathe centers need an additional cement foundation. This absorbs the natural oscillations of the machine lathe as well as external vibrations that occur in close promiximity to the machine. The precision of turned components that are produced within a hundreth of a milimeter is directly impacted by these distributing vibrations. An electric motor and a gear box are used to power the lathe's spindle. The rotation speed and the turning of the spindle needs to be adjustable. The more of the lathe's parameters that can be adjusted, the more comprehensive the processing of a component can be. Spindles, supports, carriages and tailstocks are integrated into a monolithic grey cast iron cover. This needs to be particularly good quality, massive and precisely constructed. The disadvantage of a cast component is that it cannot be welded. Bangs, cracks or other damages to the body usually means that the whole machine has to be thrown away. Therefore, metal lathes should be installed in a certain place and then not moved again. Useful accessories for a machine lathe include lighting and an extraction system. Lathes metal also contain CNC control and a cover. Instead of a tailstock, large high-end lathes have two powered spindles. Complete lathe machining centres also having a tool changer. The most common tasks undertaken on a lathe are straight turning, face turning, drilling, reboring and the production of internal and external threads.
Depending on the turning axis, lathes are available either in a vertical or horizontal construction. Vertical lathes are used for processing components with a large cross section; the components are vertically clamped in and turned. They are usually available without an additional chuck. One of the most common types is the horizontal lathe. These are generally called universal lathes. The universal lathe is usually used for training purposes. There is an enormous range of metal lathe machines for sale, available in all sizes. The small metal lathes are used for DIY purposes or by watchmakers. The largest lathes can take up an entire industrial hall. The most commonly used lathes are the mid-sized universal lathes, CNC lathes and automatic lathes.
Workers who want to operate a lathe require a certain level of qualification before they can be authorised to do so. Beginner courses cost over 1,000 Euros at vocational training institutes. This is the recommended basic requirement for freely operating a lathe center. Ideally, lathes are operated by trained cutting machine operators. In addition to training, a high level of experience is also required. Therefore, trained turners (like welding machines) can constantly increase their qualifications with additional certificates. Laymen and unskilled workers would not be able to usefully help during the operation of a lathe machine. The most they could do is clean the lathes (if they are off) and turn the lathes back on. However, the worker needs to be briefed on the lathe's risks and safety measures.
Lathes have a conveyor belt, upon which the workpiece is placed. These conveyor belts are designed in such a way so that the workpiece arrives at the turning station in a specific position. The turning process is then done automatically. Afterwards, the workpiece is guided out and taken from the machine. The loading and unloading process can be undertaken automatically by an industrial robot. If turning is done automatically, it is important to have continuous quality control. The general wearing out of tools can be identified through regular and thorough checks. This prevents the production of waste and the risk of complaints. Just like all cutting machines, lathes have the need to be regularly cleaned. Cooling lubricants and chippings are very adhesive and can form hard crusts. It is necessary to clean the lathe daily and conscientiously.
Lathes are machine tools on which operations such as turning, drilling, cutting and sanding can be performed on a rotating workpiece. There are many different kinds of lathe machines available. Here is a selection of those most commonly found on used industrial machinery auction sites. A good example for a type of lathe is the BAILEIGH bench lathe, here is also the specification of this type of machine for you to get a general idea.
|Baileigh Bench Lathe - PL-1022VS Specs|
|Spindle Speeds||50-2000 rpm (Variable)|
|Tool Slide Travel||1.89"|
|Range Of Metric Threads||0.4 - 3.4 mm|
|Range Of Inch Threads||8 - 56 T,P.I.|
|Shipping Weight||403 lbs.|
Lathes are extremely versatile, precision machine tools on which various actions can be carried out, so they are very much in demand in a multitude of manufacturing industries and businesses. Due to this usefulness and popularity used metal lathes for sale are very much sought after. However, if you look for second hand lathes for sale online you are more than likely to find what you need, due to the wide selection of used industrial equipment auctions that have developed in recent years. It's a fact that, though, this important piece of equipment can prove to be expensive, especially when it comes to CNC lathes. Fortunately, there is a solution to this problem in the form of used metal lathes, which are often easy to obtain at significantly lower prices than their brand new counterparts. Additionally, if you see a used lathe for sale you know that the chances are it's been well taken care of, has been built to be durable and robust and will prove to be dependable. If you are looking for a used metal turning lathe for sale then you will find low prices, a wide selection of all types of lathes and complete convenience at used industrial machinery auctions, the number one source for this kind of equipment.
As we know a lathe is a machine that is used to produce precise parts. These components are generally produced as mechanical components for other machines stress on a lathe machine will impact the precision to which it can process workpieces. The storage areas and guideways start to give way and the static components can lose their angularity. This is usually not caused by age, but the way and regularity in which the lathe is used. This impacts their dimensional accuracy. Therefore, it is recommended to produce a test component on a used metal lathe for sale in order to see clearly what the machine's operational capability is. Used lathes can be easily bought at a bargain price at second hand market. There are numerous service providers that can repair used lathes for sale for a good price in case if a second hand lathe is broken. Buying a used lathe always requires expertise and it is important to undertake a thorough examination of the used lathe before buying. Several used lathes for sale can be found on the TradeMachines.com used industrial machinery market which are aggregated from our partner auction houses and markets. You can buy a used metal lathe on the portal of individual auction houses to which you will be taken from our website in just one click.
Regarding lathes, it is better to buy a good-quality used machine than a bad-quality new machine. In recent times, there have been numerous suppliers of lathe machines from countries where there is no quality certifications. These machines can undertake the require tasks, but if they are particularly cheap, they usually have a very restricted working life. Machines made by German or European manufacturers can be a decade old, and still perform well in the long run. Recommended manufacturers of lathes are HEYLIGENSTAEDT, HARBOR FREIGHT, GILDEMEISTER, DÖRRIES, GRIZZLY, WALDRICH, WEILER and MEUSER.