Market Overview:

Used John Deere 4850 for sale

General Specs

Rate this product!
0.0 (0)
Thank you!
You have already rated.
Rating is not available. Try again later.
Category: Tractors
Manufacturer:
Model: 4850
Condition: Used

Technical Specifications

Manufacturer: John Deere
Model: 4850
Condition: Used
Description-1: 50 Series
Description-2: Row-Crop tractor
Weight: 17457 to 18720 pounds
Drawbar (tested): 164.73 hp [122.8 kW]
Chassis: 4x2 2WD
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Sound-Gard cab standard. Optional four-post Roll-Gard ROPS.
Ground: negative
Bore/Stroke: 4.56x4.75 inches [116 x 121 mm]
Air cleaner: dry
Compression: 0,625694444
Rated RPMs: 2200
Starter volts: 12
Transmission: John Deere Power Shift
Gears: 15 forward and 4 reverse
Speeds: 20.8-38 rear tires.
Weight (operating): 18,720 lbs [8491 kg] (2WD)
Wheelbase: 118.5 inches [300 cm] (2WD)
Type: full power shift
Valves: 2 or 3
Pump flow: 29.5 gpm [111.7 lpm]
Fuel tank: 102 gal [386.1 L]
Rear PTO: independent
Rear RPMs: 1000
PTO (claimed): 190 hp [141.7 kW]
PTO (tested): 192.99 hp [143.9 kW]
Pressure: 2277 psi [157.0 bar]
Charging system: alternator
Volts: 6
Clutch: Perma-Clutch wet disc
Weight (shipping): 17,457 lbs [7918 kg]
Length: 179.7 inches [456 cm] (2WD)
Width: 118 inches [299 cm] (standard axle)
Height: 117.8 inches [299 cm]
Location: Differential on rear of tractor.
Front tire: 11.00-16
Rear tire: 14112
Charging amps: 90
Ag front: 11.00-16
Ag rear: 14112
Rear lift: 9,599 lbs [4354 kg]
Number: 2
Ground clearance: 14.92 inches [37 cm]
Hydraulic system: 18.6 gal [70.4 L] (2WD)
Engine Power: 162 hp [120.8 kW]
Capacity: 18.6 gal [70.4 L] (2WD)
Coolant capacity: 32 qts [30.3 L]
Oil capacity: 74.4 qts [70.4 L] (2WD)
Firing order: 1-5-3-6-2-4

Info-mailer for "John Deere 4850"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.

John Deere 4850 from other providers

This may be also interesting for you

This JOHN DEERE 4850, part of the 50 series of row crop tractors, was manufactured in the JOHN DEERE factory in Waterloo, Iowa between 1983 and 1988. The 4850 JOHN DEERE uses a 7.6L JOHN DEERE turbocharged 6-cylinder diesel engine that is liquid cooled. It comes in either a 2 wheel drive or optional 4 wheel drive version with a Sound-Gard cab as standard (with an optional four-post Roll-Gard roll over protection system) and hydraulic wet disc brakes.

JOHN DEERE 4850 Specs

The specifications for this JOHN DEERE 4850 tractor are as follows: It has a 102 gallon (386.1 L) diesel fuel tank and a hydraulic system with a capacity of 18.6 gallons (70.4 L) for the 2WD version and 21.6 gallons (81.8 L) for 4WD. The JD 4850 has a rear type category 3.3N 3 point hitch with a lift capability of 9,599 lbs (4354 kg). The JOHN DEERE 4850 for sale uses full Power Shift type transmission with 15 forward and 4 reverse gears and a Perma-clutch wet disc clutch system. A full clutchless shift can be made between the gears including reverse.

4850 JOHN DEERE Dimensions

The dimensions of the front tyres of this 4850 JOHN DEERE for sale are 11.00-16 while the rear tyres stand at 20.8-38. The wheelbase is 118.5 inches (300 cm) for 2WD and 117.1 inches (297 cm) for 4WD and this gives an overall weight of between 17457 and 18720 lbs (7918.4 and 8491.2 kg).