Market Overview:

Used JCB 2CX for sale

General Specs

Rate this product!
4.5 (2)
Thank you!
You have already rated.
Rating is not available. Try again later.
Category: Loader Excavators
Manufacturer:
Model: 2CX
Condition: Used

Technical Specifications

Manufacturer: JCB
Model: 2CX
Condition: Used
Bucket breakout (kgf) 4200
Engine make & model JCB DieselMax. 444
Dump height (mm) 2480
Drive 4WD
Pump flow (lit/min) 79
Sideshift or Centre mount SS
Biodiesel compatible? B20
Pump type Gear
Bucket breakout (kgf)1 3600
Number of cylinders 4
Travel height (mm) 3050
Bucket width. min-Max. (mm) 230-1000
Dipper breakout (kgf) 2487
Slew system Twin ram
Turn circle radius without brakes (mm) 7000
Operating weight (kg) 6354
Relief valve pressure (bar) 230
Engine power (kW@rpm) 54@2000
Loading height (mm) 3740
Engine displacement (lit) 4.4
Transmi SSion type P?shuttle
Max.imum speed (km/h) 34.3
Width (mm) 1850
Travel length (mm) 5130
Ride control (Std/Opt/NA) Opt
CCF Class 4
Bucket width (mm) 1850
SAE dig depth (mm) 4310
Reach @ ground level (mm) 6350
Loader bucket capacity (m3) 0.7

JCB 2CX from other providers

This may be also interesting for you

JCB logoIf you are looking for used JCB 2CX for sale it might come in handy to read the technical specification before hand to make the right decision and to match your needs to the machine type. The 2CX comes with 75hp JCB engine powerful enough to generate high torque to suit all applications. One tip for a more efficient and fast services is a daily ground level checks.  Big advantage of the 78dB low internal cab noise is less fatigue of the backhoe loader operator. The cab also offers the driver's back comfort with special ergonomics to ensure avoiding fatigue after a long day of driving, also to raise comfort levels there is a 7 position seat in the cab. In order to overcome difficult conditions the Limited Slip Differential axles front and rear provide traction. 

Dimantions of the JCB 2CX

JCB 2CX backhoe loader
JCB 2CX backhoe loader with a drill

One of the most important details that needs to be considered when buying used backhoe is the weight and the dimensions due to transportation. The total length of the backhoe is 5.13m and the axle centerline distance being 1.99m. Steering wheel center height is 1.76m and the cab roof height is 2.65m. Shovel width  and the rear frame width are 18.5m. From the slew center to the rear axle center distance is 1.13m with a 0.31m stabilizer feet clearance. Operating weight is 5599kg. 

Video of the JCB 2CX in Action

 

Specifications for the JCB 2CX 

The backhoe loader comes with direct injection diesel engine with 4 cylinders from JCB. 4.4 liter displacement with 103mm bore and 132mm stroke. rated engine rpm is 2200. The Integral steering priority valve is used with full power by the hydrostatic system by utilizing the the main hydraulic pump. Steering axles Front and rear and 4 steering turns – lock to lock. the fuel filter Replaceable spin-on cartridge plus water/sediment separator.High volume buckets combined with high lift and breakout forces efficiency to maximize JCB backhoes offers aligned lift self leveling on the up and down cycle enhancing load retention and use of optional pallet forks.

JCB 2CX dimensions

 

Product description for JCB 2CX

The JCB 2CX is an extremely versatile mid-sized compact backhoe loader. Being a model from the renowned JCB CX range, the durability and productivity of a JCB 2CX for sale far exceeds that of similar machines from other manufacturers. Technical data Take a look at the capabilities of a JCB 2CX backhoe for sale; the JCB 2CX specs include a 4 cylinder turbocharged 4.4 litre diesel engine, returning both fuel efficiency and an adequate power output of 75hp (56kw) combined with a maximum torque of 302Nm (223lbs ft.) at 1200rpm. The JCB2CX, with 4 wheel steering, 4 wheel drive and maximum travel speed of 21mph, has uncompromised manoeuvrability and traction. The 2CX JCB backhoe has a maximum digging depth of 3.67 metres and is equipped with a single acting hydraulic circuit and JCB’S quickhitch system to allow for easy attachment of an extensive range of accessories and tools. The JCB 2CX loader has a range of options such as a 0.6m? 6 in 1 bucket, pallet forks etc… and has a maximum lifting capacity of 2200kg. With JCB’S reputation and build quality a used JCB 2CX for sale is an investment that will return great productivity and efficiency.