- Fixed Price
United States | Ivyland
United States | Ivyland
Germany | Oberhausen
Belgium | Schoppen
Italy | Zoppola
Info-mailer for "Handling / Packaging"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
High speed, centrifugal bowl feeder rated at speeds up to 1200 ppm (depending on application). Has a 40" diameter vibratory feeder bowl, and (1-1/2"W x 1"H) product tracks, (72"L x 1-1/2"W) product discharge conveyor, with a 52" discharge height, and is mounted on a (4) leg, epoxy coated, common base stand.
12" wide x 56" long cleated incline rubber belt feed conveyor with 42" diameter disc pack off table. Has 12"W x 1"H cleats set on 10" centers with 3" H guide rails, 8" in feed / 42" discharge heights, and a 42" diameter pack off disc table, mounted on casters.
316 Stainless Steel Portable Transfer Feeder Has Cone Bottom And Measures 3’H X 4’D. Has 8" Dia Removable Clamp, (1) 1-3/4" Dia And (2) 1/2" Dia Side Bottom Outlets, 3-1/2" From Floor. Top Inlets Measure (1) 1-3/4" Dia, 2-1/4" Dia, 7-1/4" Dia And 18" Dia With Lift Off Cover. Tank Has (3) Kuroda Hi Rotor Pneumatic Air Motors And Air Panel Control. Low Pulse dense phase air conveying.
50" dia capacity, centrifugal bowl feeder, rated up to 2000 parts per minute depending on size part and shape. Unit has a 72" dia top ring, 50" dia bottom shell, 50" L hand crank adjustable width spinning rod product discharge conveyor with (2) 1-1/4" dia x 50" L rods, air reject, 15" dia rotary discharge wheel, A/B SLC 500 controller, and variable speed bowl and roller conveyor controls, and is mounted on a common base frame with height adjustable legs.
137"L x 8 1/2"W, plastic interlock belt conveyor. Has 15-degree curved incline infeed (32" high in, 36" high out), 37" long top drive belt, variable speed drive controller, lexan barrier guarding, and 1/2hp washguard drive motor. Mounted on stainless steel frame with locking casters.
Citrus Model D-E-D-SF-L, automatic, double high, left to right, can depalletizer. Rated from __ to __ sweeps per minute and number of cans – depending on materials and application. Pallet size: up to 56" long x 44" wide x __" high. Equipped with 144" long x44" wide, automatic (2) chain, full pallet in feed conveyor, pallet hoist with 4-corner support and slip sheet remover with reciprocating sweep arm to push cans onto 132" long x 44" wide can accumulation table and ___" long x __" wide top operator platform with side mounted access ladder. ___" long x ___" wide (2) chain empty pallet discharge conveyor with 10 to 12 pallet capacity, automatic, empty pallet stacker. Control panel has ___ PLC, with push button and switch controls. Mounted on heavy duty base frame.
Automatic, coupon inserter capable of speeds up to 150 ppm. Has a min/max product size range of: (1" – 5" leading edge) x (2 1/4" – 9" repeat length) x (0.005" – 0.25" thick). Comes with a (41"L x 4 1/2" W) product feed conveyor, with power controller. Unit is ideal for feeding over-wrapped coupons, or sachets from continous web. Last running 2 3/8" W x 4"L overwrapped recipes cards in a food operation.
High speed adjustable cap feeder/sorter system which orients and delivers parts at a rate of up to 1500 ppm. 40" diameter bowl. Bulk belt feeder has 1/8 hp motor for primary roughtop conveyor belt (35"L x 22"W) feeding a rubberized-top conveyor belt (15 1/2"L x 9"W) run by 1/30 hp motor. Feeder bowl equipped with a variable speed Pentadrive controller, a product interrupter, and a RC 500 relay logic control system.
King Model SG100,stainless steel, barrel style, desiccant feeder rated from 20 to 150 pieces minute – depending on materials, application and container. Equipped with 15" diameter vibratory feeder bowl with 2" high rails, and 5/8" diameter feeder chutes (chutes missing) with 32" discharge height, Control panel has start stop, speed controller with e-stop. Mounted on stainless steel base frame with casters free standing, mobile unit designed to attach to existing conveyor,
24" diameter, stainless steel vibratory bowl feeder. Equipped with a 32mm wide cap chute with 84" of floor clearance, top interlocked lexan safety guarding, and four interlocked side doors. Mounted on a steel frame with locking casters and height adjustable legs.
Table top conveyor with 90° bend. Equipped with 5" wide belt travelling straight for 105", curving right 90° (7" radius) before travelling 25" to discharge at a height of 34", 1-1/2" high plastic guard rails on straight sections, vari-speed controls, an on/off switch, foot pedal and 6" high aluminium guard rails through the corner.
Centrifugal feeder is capable of speeds up to 2000 parts per minute dependent on part size, shape and feed characteristics. Unit Has 50" diameter bowl 25 Cu Ft capacity. System dimensions: top ring diameter is 72", bottom shell diameter is 50" and 36" discharge height.
Automatic dispensing machine designed to feed three dimensional or bandolier packets at a continuous rate of 105 packets per minute. Unit will handle packages 2-1/2" to 7-1/2" long and 1-1/2" to 4-3/4" wide x 1" thick. Pouch material can be paper, foil, unsupported plastic or any material readily cut with shearing action. Unit includes registration and cut off system. Includes casters for easy mobility to any packaging line. Last delivering packages of toys to cereal boxes. OAD: 3′ long x 4′ wide x 7′ high – 880 lbs.
Stainless steel, belt checkweigher with 18 1/2"L x 8 3/4"W load cell. Capacity: up to 2.6 lbs. Has accuracy of +/- .2g, 14"L x 8 3/4"W infeed conveyor, 18"L x 8 3/4"W discharge conveyor, air reject, lexan cover over load cell, gap sensor, push button operator interface with LED display, direct feedback control capability, and rejector direction setting. Mounted on stainless steel frame with height adjustable legs.
Multi station sheet/booklet feeding system with integrated lugged conveyor. Equipped with Kirk Rudy Model KR 324 feeders with a product size range of 5" to 15" in length by 3" to 14" in width. Feeders integrated with 31′ 6" long lugged conveyor. Able to handle a wide variety of products from single sheets and envelopes to booklets and magazines. Last doing multi-pack coloring books.
Centrifugal feeder capable of orienting and delivering containers at a rate of 20 to 2000 parts per minute depending on part size, shape and feed characteristics. Unit has 50" diameter bowl, 72" diameter outer ring with 2" pockets, and 42" discharge height. Equipped with lexan guarding and screw leveling legs. Unit last used to feed plastic candy containers.
Bull nose style, transfer system designed to do right angle transfer of conveyed products. Equipped with a 74" wide x 72" long top belt and a 74" wide x 12" long top belt with a closing bull nose mechanism which allows product to either continue through or drop down onto a 6" wide x 101" long bottom belt traveling in the transverse direction. Features 74" long over head row holder, product photo eyes and safety guarding.
Automatic coupon / leaflet feeder capable of 150 pieces per minute. Product: (7/8" – 3") leading edge (22mm – 76mm) x (1" – 4")L (32mm – 102mm) x (.005" – .1888") thick (.13mm – 5mm). Features 67" dispensing height, cut between individual coupons, multi-stage dispensing, Equipped with Longford Microprocessor controller with push button controls, LED display, photoeye for cut length detection, E-stop, barrier guarding with electrical interlocks, status indicator lights, and tape dispenser. Mounted on tabletop base with casters, set down foot, and air cylinder manual height adjustment. Designed to feed a continuous web of bandolier product. Ideal for placement of items such as leaflets, promotional material, coupons and sachets into a packaging line. Last running 2 3/8"W x 4"L recipe coupons.
Automatic, desiccant or pouch feeder rated at speeds up to 245 ppm depending on size pouch. Designed to dispense pre-made pouches and has a size range of: 3/4" – 3 1/2" L x 3/4" – 3" W x 1/32"- 5/16" Thick, 12" W OD product reel with 1 1/2 " ID core, registration, no container / no pouch, scissor cut off, hand crank height adjustable column, on / off controls and is mounted on H-base type frame with locking casters made to roll over existing conveyor.
S/S vibratory conveyor measuring 170" (L) x 6" (D) x 18" (W) capable of 450 cubic feet/hr @ 20 fpm to 900 cubic feet/hr @ 40 fpm. Conveyor features an overhead mounted drive, an 8" x 18" pneumatically operated bottom discharge located 123" from one end and 45" from the other end, and a wash down motor.
20" diameter, all S/S, centifugal bowl feeder capable of speeds up to 300ppm (depending on size bowl and product) Has a (20"dia x 8" deep) feed bowl. Designed for constant flow and orientation of individual caps or plugs. Equipped with a Spartan bowl speed controller, and mounted on all S/S base. Last running in a pharmaceutical operation.
Find all the biggest selection of Used handling and Packaging Machines in Industrial Auctions now online. Bid and buy now. Find specs, prices and more information on used packaging equipment below.
Packaging machines are used in the movement, storage, control and protection of both the materials used to produce goods and the goods themselves. Packaging equipment is used to enclose and protect those goods for distribution, storage and eventual sale.
Handling equipment is generally subdivided into the areas of storage and handling, bulk material handling, engineered systems and industrial trucks. Using the most appropriate and efficient handling equipment helps to keep costs down and increase productivity. The optimum situation is when materials are handled as few times as possible, this being the most efficient and cost effective system. Typical handling equipment includes forklift trucks, hoists, trolleys, conveyors and packaging and labelling equipment. Packaging equipment can be bought as standard and modified as required. It includes accumulating and collating machines, vacuum packaging, cartooning, conveyor belts, filling machines, label dispensers, palletisers, wrappers and banders. REDHILL are renowned as manufacturers of high quality handling, storage and access equipment. FLEXICON are specialists in bulk handling equipment such as flexible screw conveyors, bulk bag fillers and weigh batching systems. WILMAT produce pallet trucks, mobile cranes and stackers, among other items, that have gained a sterling reputation throughout various industries. Film wrappers, conveyors and robotic palletisers are some of the specialities of SCM, whose products are highly sought after by those looking to buy used handling / packaging equipment. SSI SCHAEFER is a global leader in logistics and material handling systems, and are noted in particular for their innovative and efficient carousel systems. MARDEN EDWARDS is a leading company in the design and manufacture of wrapping and packaging machinery. The MARDEN EDWARDS EVO125FF Overwrapper is a particularly versatile and reliable item of equipment. KBW has established itself as one of the leading packaging companies in the manufacture of liquid filling, capping and labelling machinery. REDPACK are well established manufacturers of flow wrapper machinery and packaging machinery, whether stand alone modules or integrated systems. Their products are very popular on the used handling / packaging equipment market.
New handling / packaging equipment can be costly to purchase new. This is especially true if the equipment is custom built for a specific purpose. A more cost effective option is to buy used packaging equipment that may be suitable as purchased or require minor modifications as appropriate. Buying used handling / packaging equipment and then adapting it as required works out a lot less expensive than buying new, custom built equipment. A convenient way to look for the equipment you need is by browsing used packaging machines in auctions. You will be surprised at what is on offer and the opportunity for bargains is undeniable.
There is a vast number of manufacturers of packaging equipment worldwide. There are too many to list in depth, but the following are those that seem to be popular, and sought after in the used handling / packaging equipment auction marketplace. DAIFUKU, DEMATIC, FLEXICON, MARDEN EDWARDS, MECALUX, MURATA, REDHILL, REDPACK, SCM, SSI SCHAEFER, VANDERLANDE and WILMAT.