- Fixed Price
Lithuania | Naujamiestis
Lithuania | Naujamiestis
Lithuania | Naujamiestis
Lithuania | Naujamiestis
Lithuania | Naujamiestis
Info-mailer for "Food"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Year of Make: 2001
Year of Make: 2009
Equipment for the sorting of glasses or repackaging to assortments from and in trays Year of construction: 07/2009 - 3 different tray formats can be processed - Different pack variants - Used glasses formats: 72 x 110 mm and 69 x 86 mm - Maximum 15 trays / min (Depending on the size of glass to be sorted) - Feed and discharge belts BLIND The product range for glasses takes trays with variable lens sizes, removes the glasses and sorts them into trays. Inspection and test run of the facility are possible after consultation. Further information on request.
Spain | Murcia
Used Separator BAADER, type: 603 Separator with angle grinder and feed - Baader separator, type: 603 - KILIA angle grinder, type:.. DM 114 - feed for 120 liters meat trolley including 1 pc perforated drum - Good condition and ready to use inspection and test run are to arrangement like possible.
Austria | Wallern an der Trattnach
Year of Make: 2016
Year of Make: 2001
Year of Make: 2000
Single chamber, stainless steel, gas fired, hot air jet oven. Aperture: 32.5" in Width; 4" in Height; 80" in Length. Baking area: 24 ft². Temperature range: 0° – 550° F. Bake time: 1 minute to 30 minutes. Equipped with a 32" wide x 124" long stainless steel mesh conveyor belt, two side viewing ports, 3" diameter exhaust port, two recirculating air blowers, variable temperature/speed controls, and a touch pad controller with LED display. Mounted on height adjustable legs and casters.
Rietz Model RE-10-K5427, stainless steel extructor, designed for grinding frozen, partially frozen or fully thawed 40 lb blocks of product from 1000 to 4000 lbs an hour – depending on materials and application Equipped with 18" long; 14" wide; 14" deep 17" deep stainless steel, product hopper with (6) 6" long x 3-1/2" wide x 1-1/2" thick hammer blades, on 2-1/2" OD shaft, (6) 4" high; 1" wide stationary anvils, no knives / no sharpening for low maintence. 10" ID rotary product reduction port, with swing open, bolt down cover, reduction screen (change part size per application) with 31" floor clearance, chain to sprocket motor drive, safety guarding, start / stop and e-stop push buttons and mounted on all stainless steel base frame with casters.
Heavy duty, meat grinder capable of processing up to 4000 lbs per hour – depending on materials and application. Equipped with a 43" long x 23" wide tilt feed pan with 7" high backside, and 5" high front side, and 9" Long x 7" Wide x 7 1/2" High feed hopper with 12" Long x 4 1/2" Wide grinding screw and has a 6" 0D, and 5" ID threaded product discharge with 21" floor clearence, 7.5 Hp motor drive and is mounted on (4) leg base frame.
Blommer 7,500 lb capacity, vertical, carbon steel, low pressure water jacketed, chocolate melting and mixing vessel. Inner chamber dimmensions: 72" ID x 48" straight wall. Equipped with flat top, dual flip top covers and bridge mounted sweep agitation, 5 Hp drive, with safety guarding and 4" OD shaft with side scrape paddles. Full low pressure water jacket rated to 5psi with interior baffles to direct the water flow through out the jacket, to a circulation heater and back to jacket (4) 2" OD side and (2) 1-1/2" OD bottom threaded jacket in / outlets and Watlow side mounted water heater circulation system. Dish bottom has 5-1/2" OD threaded center bottom discharge with 12" floor clearance, temp probe and mounted on (4) legs.
Stein, Model APB Overflow, batter applicator. For use with conventional pumpable batters. Products per minute – dependant on materials and application. Equipped with a 34" wide x 92" long stainless steel wire belt powered by a 2 hp drive with variable speed control, 34" wide batter quad curtain to coat top and sides of product, lowered belt section to coat bottom of product, 5 hp batter pump and 2 hp blower for removal of excess batter. Includes on/off switches for pump and blower and push button start/stop control for conveyor. Mounted on a stainless steel base with casters.
G J Olney precision trimmer for topping and tailing rated from 20 to 65 count onions per minute with capacity of over 3,000lbs per hour – depending on materials and application. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.
Urschel Model GK-A dicer / slicer / cutter. Size range: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Accept products up to 5-1/2" in any dimension. Equipped with stainless steel feed hopper, discharge chute and lift off safety guarding. Mounted on stainless steel frame. Rate dependant on materials, application and machine configuration. Change parts required to accommodate size range.
Urschel Model G, stainless steel dicer / slicer / cutter for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2"in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, 19" x 15" in feed opening discharge chute, with lift off safety guarding start / stop buttons controls and is mounted on stainless steel base frame. Change parts required for size changes. Currently set with circular knives spindle set up for 1/2" Crosscut knives spindle set up for 3/8".
Vac-U-Max, Model MDL105017.01, vacuum transfer system with topping applicator. Equipped with 16" OD x 25" deep receiving hopper with a pneumatic dump valve, 48" long dispersing auger to evenly cover 58" wide rotary deposit bottom. Control panel with on off switches for vacuum and topper, auto / hand switch to vacuum system and variable speed dials for auger and topper. Mounted on stainless steel base with casters.
Stainless steel, USDA approved belt fed dicer & strip cutter capable of production rates to 4500 lbs/hr – depending on materials and application. Capable of strip cuts from 3/16" to 3" and cross cuts from 1/8" to 4". Equipped with 32" x 9" load area on feed belt and adjustable feed roll allowing for positive product feed at all thicknesses from 3/8" to 1". Mounted on a S/S frame. Change parts required to accommodate configurations / size range.
Urschel Model CC, slices, strip cuts, shreds and crinkle cuts a variety of food products at high speed production rates with volumes per hour – depending on materials, application and machine configuration. Flat Slices: 0.8mm to 12.7mm, Standard Crinkle: 3-1/3 to 5.7 waves per inch Depth of Crinkle: 2.0mm to 2.1mm, Thickness: .040mm to .285mm. V-Slices 4.7 to 8 waves per inch Depth of Crinkle: (4.7) 2.1mm, Thickness: 1.0mm to 2.5mm. Depth of Crinkle (8)1.3mm, Thickness: 1.0mm to 2.5mm. Also does Oval, Cresent Shreds and strip cuts (See Lite) sizes. Centrifical type slicer utilizes rotating impeller that forces the product to the side walls and thru (8) individual interchangeable cutting heads that enable the processor to change the type of cut in minutes, with specially designed inexpensive throw away knife change parts. Equipped with 8" deep stainless steel feed hopper with a 9"ID product charge, 17" diameter discharge chute with 37" ground clearance and is mounted on a stainless stee
G J Olney, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut and waste. The product is placed in brass feed fingers, which firmly hold the product to assure a precision cut as it passes through the stainless steel cutting blades. Each blade adjusts automatically and independently of each other for best product recovery. Easy to operate and maintain.
BABBCO, Model DRAC, gas fired roll in baking oven. Rated up to 360,000 btu/h. Chamber dimmensions: 52" in Width; 51" in Depth; 80" in Height. Equipped with a rotation rack holder for racks up to 72" tall, ½" NPT water connection, 10" diameter hood connection and ¾" NPT gas connection. Control panel with temperature control dial up to 700°F and (2) timer dials.
Hobart, Model V1401, dough mixer. Maximum capacity of 140 quarts with pounds of product per hour – depending on materials, application and operator dexterity. Equipped with 4-speed adjustable clutch, start / stop, speed, and timer controls, with hydraulic bowl lift, beater bar aggitation, and 60 quart stainless steel bowl with caster cart. Tall column design cuts down bowl changing time, and eliminates extra clean up and can be used with 40, 60, 80 or 140 quart bowls with proper change parts.
Gaulin, Model 15M8TASMD, two stage, homogenizer. Rated output capacity of 15 gallons per hour – depending on materials and application. Maximum operating pressure up to 8,000 psi. Equipped with poppet valve cylinders and standard style valve seat, manual homogenizing valve actuator assembly with a 1½" OD / (5/8)" ID seated bevel style charge port, 2" OD / (3/8)" ID seated bevel style discharge port and pressure gage up to 15,000 psi. Poppet valve head is ideally suited for low-viscosity, moderately abrasive products, like ice cream mixes and dairy products, vegetable oils, and silicone emulsions. Standard valve seat is used for most emulsion and dispersion applications.
Blommer, 60,000 lbs, carbon steel, horizontal, low pressure water jacketed, chocolate melting and mixing vessel. Inner chamber dimensions: 168" in Length; 91" in Width; 107" in Depth. Equipped with enclosed top, 24" x 24" man way with hinged flip up cover, paddle style mixer with 4½" OD shaft driven by 15 Hp motor drive, low pressure water jacket, 24 Kw circulation heater, 3" NPT bottom end discharge with 3" discharge height without leg extentions and 15" discharge height with extentions. Includes shut off disconnects for agitation, heater and jacket pump.
Stephan, Model VCM44E, 40 quart, vertical, bowl chopper / mixer with number of pounds of product per hour – depending on materials, application and machine configuration. Equipped with a 19½" ID x 11" deep stainlees steel mixing bowl, (2) 1" long bottom chopper / mixing blades, 90° tilt, flip up / bolt down cover and low pressure jacket. ½ Hp top side scrapper motor drive and two speed (1750 / 3500 rpm) ( 8 / 12 ) Hp bottom chopper blade motor drive. Control package with start / stop, slow / fast, push buttons with digital readout and e-stop.
Stainless Steel, automatic vegetable scoring machine. Equipped with a 6" x 8" feed throat, 35" long x 6" wide over head product conveyor with soft pusher fleights on 12" centers, (6) sets of (6) circular scoring blades and a 34" discharge height. Control panel with on / off switch and variable speed control for overhead conveyor. Unit mounted on a stainless frame with casters.
Stein, Model Heritage, automatic stainless steel breading applicator. Capable of running flour and fine granular free flow coating materials with number of product per hour – depending on materials and application. Equipped with a 36" wide x 36" long product in feed conveyor belt with 27" wide top applicator and bottom breading reservoir to cover belt and fully coat product, 30" wide x 35" long stainless steel wire product discharge belt with hooded blow off for excess breading removal. Coating material is transferred from filling station to top applicator by a 7½" diameter x 65" long stainless steel screw conveyor and further transferred to bottom station with a 3" diameter x 28" long stainless screw conveyor. Unused breading from conveyor belt is returned to the filling station by a 6½" diameter x 50" long stainless steel screw conveyor. Mounted on stainless steel base frame with casters.
Urschel Model 1700 Commitrol, stainless steel, reduction mill for free flowing dry and semi-dry product with number of pounds of product per hour – depending on materials and application. Equipped with 12" ID x 12" Deep product hopper 17" OD x 17" milling chamber with (3) 3" dog leg style high speed rotating impeller and cutting head with vertical blades and 4-1/2" OD triclover product inlet and 3-1/2" triclover product discharge with 30 Hp motor drive. Control panel has push botton start, stop, auto and manual control switches. Mounted on stainless steel base frame. Operations include communiting, granulating, milling, slicing, liquifying, dispersing, and pureeing.
DFE / KAAK, complete cookie and bar processing, sheeting and baking line with volumes, speeds and bake times per hour – specific to type and size of product being run. Line consists of Vurslag dual sigma blade mixer, APV Baker (3) roll rotary dough moulder with pre feeder, dough sheeter and 72" long dough slitter, metal detector, DFE (6) zone, 44 meter long x 1.8 meter wide, direct gas fired baking oven with metal band belt, with (6) top mounted heat zone controllers, to guillotine cutter and then to carmel depositor. Sollich 10 meter cooling tunnel, to Sollich continuous flow top and bottom enrober with 84" long x 72" wide stainless steel mesh conveyor belt, Sollich 40 meter long x 1.8 meter wide thermoflow air cooling tunnel has neoprene belt with liquid air heat exchanger.
Aasted,10 plate chocolate tempering system rated up to 4000 kg or 8,800 lbs per hour with maximum pressure rating of 6 bars – depending on materials and application. Equipped with 24" OD x 28" H tempering chamber has 10 plate, water jacketed, scrape surface agitated zones with bottom mounted motor drive and flanged bolt down cover with (18) 1/2" bolts on 4-1/2" centers with top and side 8" OD flanged product ports with (4) 1/2" bolts on 4-1/2" centers, and modular turbulent flow water system, with filters for rapid heat transfer and cooling thru surface area of the tempering elements. Mounted on (4) leg 46" x 46" platform style base frame.
Rietz Model RE24K7E333, stainless steel. extructor for grinding frozen, partially frozen, or fully thawed 40 lb blocks of product from 40 to 30,000 lbs per hour – depending on materials and application. Equipped with 30" long x 27" wide x 34" ID stainless steel crevice free product hopper with (6) 10" long x 7" high hammer blades on 8" OD shaft and (6) 5" long x 8 high stationary anvils (no knives / no sharpening, low maintenance), 24" ID rotary product reduction port, with swing open, bolt down cover, reduction screen (change part per application) with 47" floor clearance, chain to sprocket 30 Hp motor drive with safety guarding. Mounted on (4) leg base frame.
Urschel Model GK-A, stainless steel USDA, dicer / slicer / cutter for a variety of food products with volumes per hour – depending on materials and application. Utilizes slice, crosscut, and circular knifes with ranges: 1/8" to 5/8" Slice Thickness, 9/32" to 3" Crosscut, 1/8" to 3" Circular. Continuous motion for uninterupted production and accept products up to 5-1/2" in any dimension. Product is fed thru hopper into a rotating impellor into the blades. Equipped with stainless steel feed hopper, discharge chute, with lift off safety guarding start / stop buttons controls and is mounted on stainless steel base frame. Change parts required for size changes.
Fedco Model SS123COS, spin disc coating system, all stainless steel construction with conveyor speeds up to 45 feet per minute, number of product – depending on materials and application. Total uniform coverage of the product is achieved by the use of (3) 8" OD spinning disks (2) above (1) below with dual back to back 17" long x (9) 3/16" wide eagle belts feed conveyors, 12" ID x 8" Deep stainless steel solution filtering system with strainer, removable cover and level detector, prevents solids from reaching feed pump that could clog and effect coverage of the product. Cherry Burrell 018 all stainless steel sanitary pump for metering solutions to spinners. Control panel with start e-stop, level indictor on/off switch, pump and spin controls with conveyor FPM, pump GPM digital read outs.