Please rotate your device! (and enjoy the best presentation of our products)

All categories

Used Machines for the Food Industry

— 329
All items 1 new item
Sort by:
  • ALFA LAVAL WSPX403SGP-31G
    • Fixed Price

    Alfa Laval WSPX403SGP-31G

    Australia


    HIRE - Alfa Laval WSPX 403 separator. Liquid-solid design separator with a self cleaning bowl. Complete with manual and a set of tools, mounted on a steel structure. 2.2kw50/60HZ Electric motor and a max of 9510rpm at the bowl. Flow rate of around 300lt per hr. This unit is available for HIRE only and is not for sale.

  • WESTFALIA SC70 36 177
    • Fixed Price

    Westfalia SC70 36 177

    Australia


    GEA Westfalia SC-70-36-777 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), clarifier design (liquid/solids separation), timed solids discharge, centripetal pump liquid discharge, belt drive configuration, 45 Kw (60hp) drive motor with constant valocity cooling fan, control panel with Allen Bradly operator interface screen, complete with tools.

  • GIANAZZA 650 x 650 - 100
    • Fixed Price

    GIANAZZA 650 x 650 - 100

    Australia


    GIANAZZA Italy. Filter Press 650x650 100 Recessed Plates. Plates made of reinforced Resin with Center feed. Complete with Double Acting feed pump. Closing of Press with Hyd hand Pump. Capacity from 10,000 to 20,000kg in 24hrs .

  • FABSTEAM 4.29 x 400
    • Fixed Price

    FABSTEAM 4.29 x 400

    Australia


    Shell and tube heat exchanger. Tubes and end caps are made from Monel 400 which is a corrosive resistant material made up of Nickel and Copper. 5.30m long x 400mm dia 117 tubes, 21.6mm inside dia x 4.3m long - 34sqm surface area. Design pressure 1000KPA on the Shell and 1000KPA on the tubes Design temp 100 deg cel. Hyd test pressure is 1500KPA. BEM one tube pass type heat exchanger. Lased used as a still condensor. Made by FABSTEAM

  • Info-mailer for "Food"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

  • PHOENIX Double Drum
    • Fixed Price

    Phoenix Double Drum

    Australia


    Double Drum Dryer Recently refurbished and in excellent condition. Drum dia is 3ft 6inch x 10ft long Steam heated, rated at 160psi and max temp 230degC Located in Melbourne and ready for installation.

  • MILLIPORE 316SS
    • Fixed Price

    MILLIPORE 316SS

    Australia


    Stainless steel filter, 70 L Housing made from 316S/S, inlet 65mm, outlet 65mm, ex Brewery. Missing internal socks.

  • ALFA LAVAL ALSHAPE
    • Fixed Price

    Alfa Laval ALSHAPE

    Australia


    Alfa Laval ALSHAPE cheese block former, used to form blocks of cheddar cheese, can be used to form blocks of soap, and any semi hard products. Shape size is 100 X 50x25mm. Unit is completely automatic and has an out feed conveyor attached. Unit is located in Perth and was last used on Soap.

  • 65100-1
    • Fixed Price

    65100-1

    Australia


    Stainless Steel Cooking Extruder. Make: Wenger Series 65100-1. Screw 25mm Diam x 250mm long, heated barrel. LD 10/1. Drive Motor .75kw with Teco WS inverter . Input 240v 1 phase. Variable speed feed screw. Last used in Pet food lab.

  • PACIFIC PACKAGING FILLING LINE
    • Fixed Price

    PACIFIC PACKAGING FILLING LINE

    Australia


    Used - Glass jar filling line complete with Rotary Pacific packaging 12 head piston filler, Fiber King glass jar depalletizer and a multi size glass jar air cleaner. Air cleaner can hold 350ml, 500ml, 750ml and 1000ml glass jars. Jars are fed into the cleaner via an infeed conveyor and rotated upside down and clean air is blown into the jars to remove any dirt prior to being filled. The Pacific 12 head Rotary Filler was last filling mayonaise and has a bottom up cam system for filling different size glass jars. Filling rate was last running at 200 jars per minute on 750ml but can fill 350ml, 500ml and 1000ml jars. Filler may need some eletrical upgrades as it has the older style push button controls, modern PLC touch screen panel would make the filler more automated. Featuers of the filler  Sanitary 316L stainless steel wetted parts  Deep diving bottom up fill nozzles with tool‐less changeover All stainless steel construction CIP catch trays with integrated frame gutters

  • MILLIPORE 150 PSI
    • Fixed Price

    MILLIPORE 150 PSI

    Australia


    Inline filter, cartridge type, 150PSI @ 121 deg celsius, housing size 110L, 150mm inlet reduced to 80mm, 150mm outlet reduced to 80mm, 316S/S Housing, 600kpa pressure gauge.

  • SHARPLES P2000
    • Fixed Price

    SHARPLES P2000

    Australia


    Used-Sharples P-2000 Super-D-Canter Centrifuge. 316 stainless steel construction on product contact areas, max bowl speed 3240 rpm, single lead conveyor, 1,2,3,4 slotted liquid plate dam, gearbox with torque arm assembly, base and casing.

  • RADICON RHU8
    • Fixed Price

    RADICON RHU8

    Australia


    Radicon RHU8, Ratio 30/1 Currently set up as Left hand, but this can be changed. Good condition internally, with slight damage to one foot.

  • Stainless Steel
    • Fixed Price

    Stainless Steel

    Australia


    3000lt S/Steel paddle mixer 4kw Drive was last used on liquid Detergent Mixing. 3 internal paddle blades. Mixer is in as is condition.

  • GEA Wiegand
    • Fixed Price

    GEA Wiegand

    Australia


    Used-GEA Wiegand GmbH Falling Film Evaporator, Double Effect Direct Heat Single Pass. Capacity is rated at 600 kg/hr @ 10% ts concentrating to 65% ts. Previous use on skim milk 9% ts to 36% ts at 1,350 lph. Design A vertical shell-and-tube heat exchanger, with a laterally or concentrically arranged centrifugal separator. Operation The liquid to be concentrated is supplied to the top of the heating tubes and distributed in such a way as to flow down the inside of the tube walls as a thin film. The liquid film starts to boil due to the external heating of the heating tubes and is partially evaporated as a result. The downward flow, caused initially by gravity, is enhanced by the parallel, downward flow of the vapour formed. Residual film liquid and vapour is separated in the lower part of the calandria and in the downstream centrifugal droplet separator. It is essential that the entire film heating surface, especially in the lower regions, be evenly and sufficiently wetted with liquid. W

  • F.B.LEHMANN 7000L
    • Fixed Price

    F.B.LEHMANN 7000L

    Australia


    Jacketed Paddle Blender, 7000L This is a mild steel blender last used to blend chocolate, the bowl is jacketed and can handle up to 90degC, it is rated at 1Bar pressure. The drive motor is 11kw, 415V There are two discharge outlets with pneumatic valves on them. Made in Germany, F.B.Lehmann Ex Chocloate Manufacturer

  • F.A.MAKER 5000L MS
    • Fixed Price

    F.A.MAKER 5000L MS

    Australia


    5000L Ribbon blender, double helix ribbon, bowl 3050 L x 1370w x 1478 deep, 90mm shaft, heavy duty construction, wide opening for filling suitable for front end loader, 10" outlet. Setup with a 22kw drive motor and heavy duty gearbox, however we can fit other size motors to the unit to suit your product. Blender needs to be ordered as no stock currently held.

  • 700x550
    • Fixed Price

    700x550

    Australia


    Pre Breaker / Gut Cutter, hopper inlet 700mm x 550mm 15kw, 730rpm electric motor into a 10inch Radicon at 20:1 Final drive speed around 35rpm 120mm central shaft 1400mm ground clearance from the outlet

  • THE FRESH PRESS CO FP100
    • Fixed Price

    THE FRESH PRESS CO FP100

    Australia


    The Fresh Press - FP100 Commercial Cold Press Juicer Made in Australia This is the ideal cold press juicer for any start up juice bar, health food store, cafe etc. Easy to use Mounted on stainless steel castor wheels for easy mobility. Single phase 240 volt power input. Excellent pressing capability via two hydraulic rams, approx 12 tonnes of pressing force Made from Stainless Steel 316 material Stainless Steel 316 Shredder blade PLC Controlled and screen display. Capacity of approx 100+ lt/hr depending on product. 20Lt capacity stainless steel juice tray. Weight of the press is 350KGS Foot print dimensions are 1m x 1.2m. Australian Electrical Compliance. Fruit or Veg is loaded into the stainless steel chute which directs the fruit down into the shredder, once shredded it falls directly into the specially designed filter bag, then the juice can be pressed out of the bag easily with the touch of a button. Pressed juice is the most natural juice of them all. The juice is squeezed right o

  • BAKER PERKINS Double Arm
    • Fixed Price

    BAKER PERKINS Double Arm

    Australia


    Heavy duty, mild steel, double arm, jacketed, sigma mixer with cored overlapping masticator blades. 125Hp drive with heavy duty gear box, 28rpm shaft speed, hydraulic tilt with self contained power pack and switchboard. Approx 800L bowl capacity. Suitable for mixing and blending heavy products that may require heating, Ex Rubber industry.

  • TIEMAN 1500
    • Fixed Price

    TIEMAN 1500

    Australia


    TIEMAN Stainless steel V Blender. Total Volume 1.5m3, 900mm dia. Working capacity 500L to 1000L. 2 Support legs 2.8m High. 300mm outlet with sliding gate valve. Drive 5.5kw 415v 4 pole Motor coupled to Holroyd HU 5 40/1 Gear box.

  • UNKNOWN 35,000 Pressure Vessel
    • Fixed Price

    UNKNOWN 35,000 Pressure Vessel

    Australia


    35M3 Steel mixing Tank, Pressure rated DP 1050kpa at 250c, full Vacuum. Dished Ends. 3m ID x 4.2m straight side. Lightnin Agitator Exd Motor 2.2kw 68rpm. Ex Edible Oil Plant

  • JINGYUAN GROUP JYCD-250
    • Fixed Price

    JINGYUAN GROUP JYCD-250

    Australia


    Disc Cutter, suitable for cutting rubber pieces or other materials. Very heavy duty, was last used to cut truck treads. Complete with external safety cage and lockout. Drive motor 3kw, 415V. Can be seen running in our warehouse.

Info-mailer for "Food"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.