Please rotate your device! (and enjoy the best presentation of our products)

All categories

Charging and Stacking Machines in Industrial Auctions

— 33
Sort by:
  • Used Kallfass Sticker Stacker 1985 Bypass For Sale Sweden
    • Fixed Price

    Used Kallfass Sticker Stacker 1985 Bypass For Sale Sweden

    Sweden

    Year of Make: 1985


    Sticker stacker Kallfass for 1,2 m long boards capacity 5-6 m3/h

  • HOLZMA angular system with stacking
    • Fixed Price

    HOLZMA FIXOMAT - HFV 33/X/56/22 - HAK

    Belgium | Kortrijk

    Year of Make: 1998


    Cutting length rip saw: 5600 mm Cross cutting length: 2200 mm Min panel sizes: 1220 x 2440mm saw blade overhang: 185 mm main saw engines: the 30 kW, quick clamping system Power-Loc Vorritzmotoren: 2.2 kW each, quick clamping system Power-Loc saw carriage feed:. 5, - 100 m / min flow, 100 m / min return pusher feed: max. 70 m / min Number of grippers rip saw: 6 Number of grippers crosscut saw: 11 Control: CADmatic elements of the system: 1 x stacking conveyor with forklift recess dimensions 5600 x 2200 mm 1 x lift 1 x portal with vacuum Traverse packet generation 1 x alignment table 1 x rotary device the table of the rip saw for head section on the longitudinal saw 1 x rip saw with pusher 1 x waste flap and shaking conveyor 1 x intermediate transport of the sawn strips according to the crosscut saw 1 x crosscut saw with pusher 1 x waste flap and shaking conveyor 1 x cutting knife for rest strips 1 x Output belt Automatic Abstaplung HAK 1 x lift for the adoption of Sägepaketes 1 x Stapel

  • HOLZMA HER 43/22/R Charging System
    • Fixed Price

    HOLZMA HER 43/22/R

    Germany | Duisburg


    HOLZMA HER 43/22/R Charging System; Technical data: Panel feed system at lengthwise direction with driven rollers V = 12 m/min and recess for fork lift, panel size max. 4300 x 2200 mm, with 21 rollers, roller conveyor height approx. 330 mm, roller diameter 108 mm

  • RBO WINSTORE Feeding and Stacking
    • Auction: 12 days left

    RBO WINSTORE

    Italy | Zoppola

    30,000 € $ 31,884 £ 26,008

    AUTOMATIC SYSTEM TO LOAD PANELS in a edgebanding machine, GENERAL SPECIFICATIONS, Industrial and fast system, Useful width of the panel 1800/ 3000 mm, Useful length of the panel 550/ 2000 mm, Vacuum pump, SYSTEM AND OPTIONALS OF THE PANEL HANDLING, Motorized transfer conveyor for the introduction of, the panels into the production line, - Frame, with suction cup, for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking, CONTROL OF THE MACHINE AND ACCESSORIES, Control and program system, with the following features: - pc - screen colour - CD-ROM reader, Adjustable separated command board to control the machine, NORM AND OPTIONAL FOR THE SECURITY, Security norme CE mark, Protection grids installed on the machine, Total installed power 25 KW

  • Info-mailer for "Charging- and Stacking System"

    Subscribe and receive new product announcements NO SPAM!

    Yay! You have successfully subscribed.

    Yay! To confirm your subscription, click the link, we've sent you by mail.

    AUTOMATIC LINE AUTOMATIC THROUGH-FEED LINE MADE BY ► POSITION 1 - OUR CODE: LMC019 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: R TBH 500 / ER/ 30/ 12 PROFILINE/ S AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line GENERAL SPECIFICATIONS ► Industrial and fast system ► Single side for the loading of the panels into the production line ► Panels workable also in double row ► Useful width of the panel 1600 mm ► Useful length of the panel 3000 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground ► Exit of the support panel from the loading system through a motorized roller conveyor on the ground ► Motorized transfer conveyor for the introduction of the panels into the production line ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Suction cups for each horizontal bar ► Automatic de

  • ZHR 15 LIGMATECH
    • Fixed Price

    Ligmatech ZHR 15


    AUTOMATIC SYSTEM TO STACK THE PANELS FROM A SINGLE SIDE EDGE BANDER GENERAL SPECIFICATIONS ► Industrial and fast system ► Automatic system to stack panels from a single side edge bander - the panel is trasported towards the beginning of the edge bander where is the worker who therefore can always stay in feeding position of the machine SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Exit of the panel from the edge bander through motorized conveyor with rotating device.The working piece is turned, lifted and transfered on the next conveyor through pneumatic acting ► Motorized carpet conveyor for the transport of the panel - installed on the edge bander cabinet ► Roller conveyor for the transport of the panel towards the beginning of the edge bander and in particular towards the worker - installed on the edge bander cabinet CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system with the following features: - visual display - keyboard ► Command board installed on an incorporated

  • R TSH22/D/30/12 BARGSTEDT

    AUTOMATIC SYSTEM TO STACK PANELS in a boring line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the stacking of the panels of the production line to avoid interruptions ► Panels workable also in double row ► Useful width of the panel 1200 mm ► Useful length of the panel 3000 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of support panel in the stacking system through an idle roller conveyor on the ground ► Exit of the panels row from the stacking system through an idle roller conveyor on the ground ►Interior motorized lifting table ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Suction cups for each horizontal bar ► Automatic device to detach the panels from the suction cup CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system - screen colour - keyboard ► Separated electrical cabinet NORM AND OPTIONAL FOR THE SECURITY ► Securi

  • ESSE 2 S.R.L.
    • Fixed Price

    ESSE 2 S.R.L.


    AUTOMATIC SYSTEM TO STACK PANELS in squaring-edgebanding line in a edgebanding machine GENERAL SPECIFICATIONS ► Industrial and fast system ► Single side for the stacking of the panels of the production line ► Useful width of the panel 2300 mm ► Useful length of the panel 3000 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Motorized transfer conveyor for the introduction of the panels into the production line - Nr. 2 positions for the stacking of the panels of the production line with grippers ► Horizontal bars that support the clamps are opened in automatic by numerical control CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system ► Adjustable separated command board to control the machine - "touch screen" system ► Separated electrical cabinet NORM AND OPTIONAL FOR THE SECURITY ► Security norme CE mark ► Protection grids installed on the machine

  • SPINNER MAHROS
    • Fixed Price

    Mahros SPINNER


    AUTOMATIC SYSTEM TO STACK THE PANELS FROM A SINGLE SIDE EDGE BANDER GENERAL SPECIFICATIONS ► Industrial and fast system ► Automatic system to stack panels from a single side edge bander - the panel is trasported towards the beginning of the edge bander where is the worker who therefore can always stay in feeding position of the machine SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Exit of the panel from the edge bander through transfering table with air blowing device. The working piece is glided on the next conveyor through pneumatic acting ► Motorized carpet conveyor for the transport of the panel - approx. width 1000 mm - approx lenght 6700 + 7700 mm CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system ► Command board installed on an incorporated electrical cabinet to control the machine NORM AND OPTIONAL FOR THE SECURITY ► Security norme CE mark

  • TBH 41 / D BARGSTEDT

    AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the loading of the panels into the production line to avoid interruptions ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground ► Exit of the support panel from the loading system through an idle roller conveyor on the ground ► Motorized transfer conveyor for the introduction of the panels into the production line - with comb-like frame to work panels in double row - approx. width 1500 mm - approx lenght 3000 mm ►Interior motorized lifting table ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Automatic device to detach the panels from the suction cup CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system ► Separated electrical cabinet NORM AND OP

  • STARMATIC 850 GIBEN
    • Fixed Price

    Giben STARMATIC


    NUMERIC CONTROLLED BEAM PANEL SAW WITH FRONTAL LOADING GENERAL SPECIFICATIONS ► Useful working cutting width 4.500 mm ► Useful working cutting length 4.100 mm ► Useful working cutting height 85 mm ► Automatic lateral aligner with pneumatic cylinder FEEDING AND STACKING OF THE PANELS ► Panels stacking: front and manual ► Panels loading: front and manual ► Supporting table under the pusher carriage equipped with idle rollers to avoid any scratching on the panels FRONT SUPPORTING TABLES ► Nr. 1 fixed front table with with additional guide - covered by bachelite - air blowing device ► Nr. 3 front tables - covered by bachelite - air blowing device SAW CARRIAGE TECHNICAL DATA ► Speed of saw carriage: - forward 0-80 m/min. - back 80 m/min ► Carriage with main blade and scoring saw units ► Main blade - max. tool diameter 360 mm - motor power 7.5 KW ► Scoring saw - max. tool diameter 160 mm - motor power 1.1 KW PUSHER TECHNICAL DATA ► Motorized pusher carriage - nr. 6 grippers to clamp the pack

  • BRUSH/D 1332 S MAHROS

    AUTOMATIC SYSTEM TO STACK PANELS in a squaring-edgebanding or boring line GENERAL SPECIFICATIONS ► Industrial and fast system ► Useful width of the panel 1300 mm ► Useful length of the panel 3200 mm ► Working capacity 20 cycles/min. according to the dimensions and weight of the used panels ► Vacuum pump 40 / 48 m3/h SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Motorized transfer conveyor for the receiving of the panels from the production line ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Nr. 2 horizontal bars for each side ► Suction cups for each horizontal bar ► Horizontal bars that support the suction cups are opened in automatic by numerical control ► Automatic device to detach the panels from the suction cup CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system MAGELIS with the following features: - visual display - keyboard ► Adjustable separated command board to control t

  • MAHROS
    • Fixed Price

    MAHROS


    AUTOMATIC SYSTEM TO STACK PANELS in a edgebanding machine GENERAL SPECIFICATIONS ► Industrial and fast system ► Useful width of the panel 250 / 1200 mm ► Useful length of the panel 320 / 3200 mm ► Working capacity 5 cycles/min. according to the dimensions and weight of the used panels SYSTEM AND OPTIONALS OF THE PANEL HANDLING - Nr. 6 positions for the stacking of the panels of the production line - Frame with grippers for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Motorized transfer conveyor for the receiving of the panels from the production line - with additional guide ► Horizontal bars that support the clamps are opened in automatic by numerical control CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system ► Adjustable separated command board to control the machine NORM AND OPTIONAL FOR THE SECURITY ► Security norme CE mark ► Protection grids installed on the machine

  • ASTER P2 RBO
    • Fixed Price

    RBO ASTER P2


    AUTOMATIC SYSTEM TO LOAD PANELS GENERAL SPECIFICATIONS ► Single side for the loading of the panels into the production line ► Useful width of the panel 1.000 mm ► Useful length of the panel 3200 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Nr. 2 horizontal bars ► Suction cups for each horizontal bar ► Automatic device to detach the panels from the suction cup CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system with the following features: - screen colour ► Adjustable separated command board to control the machine - "touch screen" system ► Separated electrical cabinet NORM AND OPTIONAL FOR THE SECURITY ► Security norme CE mark ► Protection grids installed on the machine

  • BARGSTEDT

    AUTOMATIC LINE AUTOMATIC THROUGH-FEED LINE MADE BY ► POSITION 1 - OUR CODE: LMC019 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: R TBH 500 / ER/ 30/ 12 / S AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line GENERAL SPECIFICATIONS ► Industrial and fast system ► Single side for the loading of the panels into the production line ► Panels workable also in double row ► Useful width of the panel 1600 mm ► Useful length of the panel 3000 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground ► Exit of the support panel from the loading system through a motorized roller conveyor on the ground ► Motorized transfer conveyor for the introduction of the panels into the production line ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Suction cups for each horizontal bar ► Automatic device to d

  • SIRIO
    • Fixed Price

    SIRIO


    AUTOMATIC SYSTEM TO STACK PANELS in a squaring-edgebanding or boring line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the stacking of the panels of the production line to avoid interruptions ► Useful width of the panel 1300 mm ► Useful length of the panel 3200 mm ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Exit of the support panel from the loading system through a motorized roller conveyor on the ground ► Motorized transfer conveyor for the receiving of the panels from the production line ►Interior motorized lifting table ► Nr. 2 horizontal bars for each side ► Suction cups for each horizontal bar ► Automatic device to detach the panels from the suction cup CONTROL OF THE MACHINE AND ACCESSORIES ► Control and program system with the following features: - visual display - keyboard ► Adjustable separated command board to control the machine ► Separated electrical cabinet NORM AND OPTIONAL FOR THE SECURITY ► Security norme CE mark ► Protection gr

  • TBH + KFL + FL BARGSTEDT + HOMAG

    AUTOMATIC LINE AUTOMATIC THROUGH-FEED LINE MADE BY ► POSITION 1 - OUR CODE: LMN014 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: TBH 41 / D AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the loading of the panels into the production line to avoid interruptions ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground ► Exit of the support panel from the loading system through an idle roller conveyor on the ground ► Motorized transfer conveyor for the introduction of the panels into the production line - with comb-like frame to work panels in double row - approx. width 1500 mm - approx lenght 3000 mm ►Interior motorized lifting table ► Suction cup frame for the handling of the working panels that are lifted and put down through a vacuum system for the workpieces locking ► Automatic device to detach the p

    AUTOMATIC LINE FOR SQUARING AND EDGEBANDING WITH AUTOMATIC SYSTEM TO LOAD AND STACK PANELS AUTOMATIC THROUGH-FEED LINE MADE BY ► POSITION 1 - TYPE: LOADER - BRAND: BARGSTEDT - MODEL: TBH 500/ ER/ 30/ 12 PROFILINE - REFERENCE PICTURE: AUTOMATIC SYSTEM TO LOAD PANELS in squaring-edgebanding line GENERAL SPECIFICATIONS ► Industrial and fast system ► Double sides for the loading of the panels into the production line to avoid interruptions ► Panels workable also in double row ► Useful width of the panel 3000 mm ► Useful length of the panel 1200 mm ► Working capacity 28 cycles/min. according to the dimensions and weight of the used panels ► Vacuum pump SYSTEM AND OPTIONALS OF THE PANEL HANDLING ► Introduction of the panels row in the loading system through a motorized roller conveyor on the ground ► Exit of the support panel from the loading system through a motorized roller conveyor on the ground ► Motorized transfer conveyor for the introduction of the panels into the production line ► Su

  • Ligmatech ZHR 15XXRE
    • Fixed Price

    Ligmatech ZHR

    Year of Make: 1998


    Description ************************************************* * the return of "BOOMERANG" ZHR 15 permits the one-man operation at one-sided through-running machines. From machine Workpieces are taken over by a roller conveyor, which conveys the parts to a lifting station. About a scissor mechanism, the parts are delivered to a top pressure which encourages them to an inclined plane, consisting of wheel sections appeared. Wheel Conveyor This oblique Röll- slide the parts by their own weight toward the operator back (*) (*). Note: -------------- From a machine length> 5,000 mm Solte repatriation with be fitted an intermediate drive off. The motorized roller conveyor is equipped with a turntable, which rotates transversely from the machine incoming parts by 90 degrees and can thus be conveyed back along. For supporting long transverse incoming parts an additional support wheel conveyor is mounted, which can be folded down when not in use. Specifications ---------------- workpiece dimensio

Info-mailer for "Charging- and Stacking System"

Subscribe and receive new product announcements NO SPAM!

Yay! You have successfully subscribed.

Yay! To confirm your subscription, click the link, we've sent you by mail.