- Fixed Price
Year of Make: 1972
|Rate this product!||
You have already rated.
Rating is not available. Try again later.
|Description-1:||Agricultural Crawler tractor|
|Weight:||9,970 lbs [4522 kg] (44" gauge)|
|Drawbar (tested):||50.18 hp [37.4 kW]|
|Cab:||Open operator station.|
|Bore/Stroke:||18:1 inches [457 x 0 mm]|
|Air cleaner:||oil bath|
|Gears:||5 forward and 1 reverse|
|Wheelbase:||61.125 inches [155 cm]|
|Fuel tank:||20 gal [75.7 L]|
|Torque:||421 lb-ft [570.9 Nm]|
|Length:||120.7 inches [306 cm]|
|Width:||62 inches [157 cm] (44" gauge)|
|Ag front:||13-inch tracks|
|Ag rear:||13-inch tracks|
|Rear tread:||44 inches [111 cm] 60 inches [152 cm]|
|Clearance (drawbar):||14.25 inches [36 cm]|
|Ground clearance:||11.125 inches [28 cm]|
|Coolant capacity:||44 qts [41.6 L]|
|Oil capacity:||20 qts [18.9 L]|
|Belt (tested):||58.88 hp [43.9 kW]|
|Height (hood):||60.625 inches [153 cm]|
Year of Make: 1972
United States | Sanford
Year of Make: 1952
Info-mailer for "Caterpillar D4"
Subscribe and receive new product announcements NO SPAM!
Please click the link in the email we just sent you, to complete the subscription process.
Australia | Brisbane
Australia | Brisbane
CATERPILLAR D9N 1990 MODEL
South Africa | Cape Town
United States | Middletown
For Sale, 1979 Cat D-6D, pipe-line dozer, S/N-33X0344, 7100 hrs. very good condition, bottom, has very little use, Cat 3306 engine, 22" pads, 8ft. 10" wide tracks, 11 ft. H, deck is 9 ft. 6" wide, aprox. 26 ft. long with deck. Set up with Quincy air compressor, model 390, yr. 2009, hydraulic drive. Located in Plainville, Ct. Will load. If not tax exempt, a 6.35% Ct. sales tax will apply.
Italy | Guidonia Montecelio
Year of Make: 1982
OPTIONAL MACHINE UP TO 30.05.2017 Machine in Very Good General Conditions Year 1982, 7,000 Hours Counter, Machine Height with ROPE 3,650 mm, Machine Width 3000 mm, Machine Length with Blade 8900 mm, Blade Width 4200 mm, 400 HP Engine Excellent Turbo, Power Shift Transmission with 3 gears forward and 3 back, Great Hydraulic System, Steering Clutches and Oil Cooling Brackets, Good Bulldozer Blade, Good Roof Roof, Chains (Track), Inflatable Rollers and Shoes at 90 %, 80% Driving Wheels, Good Bodywork with Original Paint. Complete Ripper Monodent Machine Great. READY AND READY MACHINE READY TO WORK
Dozer Caterpillar D7G winch opportunity
France | Oysonville
Year of Make: 1986
Main information Main information Ref. Site: 1962816 Bodywork - Brand Caterpillar Range (make: Caterpillar) D7G Model winch Condition Used Year 01/01/1986 Track Caterpillar D7G Caterpillar D7G Power 200 hp Hours of Operation 4800 Hours Equipment Caterpillar Dozer Equipment Caterpillar Bulldozer TILT Bulldozer TILT Blade Width of Blade 3.66 meters Equipment Status First hand Additional Information Caterpillar winch Additional Information Caterpillar winch Engine Information Caterpillar 3306 T; Remarks With winch hyster New winch pump with hoses.
Bulldozer Caterpillar D7H D7G opportunity
France | Oysonville
Year of Make: 1987
Main information Main information Ref. Site: 1943901 Bodywork - Make Caterpillar Range (make: Caterpillar) D7G Model D7g Condition used Year 01/01/1987 Track Caterpillar Track Condition Strong General condition Tiles Steel Characteristics Caterpillar D7G Characteristics Caterpillar D7G Power 200 HP Number of hours 4500 hours Equipment Caterpillar Bulldozer Caterpillar Bulldozer Right Blade 3-D Trimmer TILT Blade Straight Blade 3-Tier Ripper TILT Blade Blade Width 3.66 meters Equipment Status First hand Additional Information Caterpillar D7g Additional Information Caterpillar D7g Engine Information Caterpillar 3306 T
overhead conveyor chain for moving the chairs colors on hooks. System type "System D8" with the following features: Nr. 01 drive unit to "Caterpillar" type light. Nr. 01 motorization group towing 0: 9 Mt./minuto min./max Hp working speed 1 Installed power electric motor 70 Mt. Chain D8 and rollers D.37 (development) Mt. 62 Binary rectilinear extent Nr. 10 horizontal curves at 90 ° r = 500 mm Nr. 01 Binary di'ispezione Nr. 01 Couple voltage Nr. 87 of support brackets Nr. 87 Number hooks Mt. 2,20 height from ground mono / lower height 5.00 Mt. from the ground mono / upper Mt. 0.80 Step Pali hooks, beams and the conveyor support brackets.
Italy | Udine
-Caterpillar 953C, year of construction 2000, operating hours 9.600h, 3-tooth-ripper, 3-hydraulic control circuit, AHK, drive 35% good, 550mm floor plates, shovel with teeth 2,45m wide, 2 speeds, 6 cylinders Caterpillar Motor 3116 90,3kW / 123PS, 19.600kg, German vehicle first hand Caterpillar 953C, construction year 200, working hours 9.600h, 3 teeth ripper, 3 hydraulic steering system, undercariage 35% good, 550mm shoes, bucket 2,45m wide, 6 cylinder caterpillar Engine 3116 with 90.3kW / 123HP, working weight 19.600kg, german machine from first hand
Spain | Ocaña
Year of Make: 2007
Experience the CAT D4 bulldozer for heavy duty works, which is industry's unprecedented in terms of intuitive handling. The CATERPILLAR dozers D4 creates a smooth fine sub grade at less effort of the driver with sign stabilization. The shield stabilization function takes the soil conditions and ensures the desired formation along with the driver. Is to use the integrated machine control GPS, you reach the target formation even faster - less transitions with less labour input. The D4 sets new standards from the first cut to the fine sub grade.
The new blade stabilization control makes it easier to work with the machine both new and experience driders. Complements the work of the driver plate stabilization, creates a smooth fine sub grade. The handy grip allows more granular control and less quickly tire the rider, that will requires little effort the knurled wheel to the blade pivoting control. Facilitates the removal of material the plate vibration function. The drivers cab offers a comfort for the whole day in the spacious, comfortable cab you can work relaxed and productive throughout the day.
|Width Over Tracks||6.5 ft in (1981.2 mm)|
|Height To Top Of Cab||5.8 ft in (1752.6 mm)|
|Length Of Track On Ground||5.2 ft in (1575.8 mm)|
|Ground Clearance||0.95 ft in (289.6 mm)|
|Length W/o Blade||10.3 ft in (3124.2 mm)|
|Track Gauge||5 ft in (1524 mm)|
|Standard Shoe Size||13 in (330.2 mm)|
With the hydraulic plate angle adjustment the driver can adjust the plate tilt to different operating conditions, without leaving the cab. Tilt the plate forward increases the penetration, tilt the plate to the back maximizes the capacity is two options. The angle of the driver's cab are adjustable. Optimize the plate inclination for operation to improve productivity.
An easy to read display provides important system information. Easy to read instruments provide information about the current state of systems. As special equipment is the larger display CB460 for GPS available, which is mounted on a line with the corners of the plate and can be easily observed. Large door panels allow unimpeded views of the corners of the shield and the shield knife which is important especially in the lay-out of the fine, as well as working on curbs, and close to the foundations.Large side Windows provide unobstructed view on the areas of right and left side of the machine.